1. Lecture 7 Hybrid POSS Materials Class 1C Organic phase is made in situ in the inorganic phase. and D: Small organic phase dispersed in continuous inorganic phase

2. Class I No chemical bond between components only weak interactions (van der Waals, hydrogen, electrostatic) Class II Chemical bonds between components strong interactions (covalent bonds) Entrapping Grafting J. Livage Just a reminder:

3. Making Hybrid Materials: Class 1C (Polymerizing in pores) Porous metal oxide Liquid monomer (no solvent) UV, heat, radiation Non-porous composite material

4. Making Hybrid Materials: Class 1C (Polymerizing in pores) 1) Monolithic inorganic Polymer nanocomposite from completely filling pores 2) Reinforced xerogel or aerogel by coating aggregated particles with polymer 3) Polymerizing intercalated monomers in clay 4) Polymer surrounding colloid crystal of inorganic

5. First example: Monolithic inorganic Polymer nanocomposite from completely filling pores Infiltration & polymerization of monomer in pores of gel Provides a percolating filler phase based on the original gel skeleton Acc. Chem. Res., 2007, 40 (9), 810–818

6. First example: Monolithic inorganic Polymer nanocomposite from completely filling pores Pope, E. J.; Asami, M.; Mackenzie, J. D. Transparent silica gel–PMMA composites J. Mater. Res. 1989 4 4 1018 Transparent, tough, tailorable refractive index, abrasion resistant

7. Reinforced xerogel or aerogel by coating aggregated particles with polymer Porous materials, like aerogels, are super thermal insulation, but very weak Monomers, such as superglue, can be polymerized directly on surface by chemical vapor deposition Boday, D. J.; Stover,. J.; Muriithi, B.; Keller, M. W.; Wertz, J. T.; DeFriend Obrey, K. A.; Loy, D. A. ACS Applied Materials & Interfaces 2009, 1(7), 1364.

8. Reinforced xerogel or aerogel by coating aggregated particles with polymer Epoxies, urethanes, some vinyl polymers monomers can be polymerized in solution if they will precipitate onto the particles surfaces. Acc. Chem. Res., 2007, 40 (9), pp 874–884

9. Polymer-Clay Nanocomposites from intercalation & polymerization of monomers A. Usuki, Y. Kojima, M. Kawasumi, A. Okada, Y. Fukushima,T. Kurauchi, O. Kamigaito, "Synthesis of nylon 6-clay hybrid," J. Mater. Res. 1993, 8, 1179 1) First heat 100 g montmorillonite (MMT) with 51.6 g of aminolauric acid and 24 mL conc. HCl in 10 Liters of water for 10 min. 2) Filter, was 3X with 10 L hot water, then freeze dry, then dry under vacuum at 100 °C to afford ion exchanged, intercalated MMT 3) Mix 29.7 g intercalated MMT, 509 g caprolactam, and 66 g 6- aminocaproic acid were mixed in mortar in pestle. 4) The mixture was polymerized in3000 mL round bottom flask with mech. Stirrer and under nitrogen for 30 min at 100 °C then for 6 h at 250 °C. 5) The products were crushed in mortar & pestle, then washed with water and dried at 89 °C.

10. Polymer colloidal crystal nanocomposites Microporous and Mesoporous Materials 2001,44-45, 227 - 239 1) Prepare a colloidal crystal (opal) from silica particles 2) Add monomer & catalyst to fill pores 3) Polymerize to form72% by volume silica filled organic polymer 4) Dissolve silica away with HF if inverse opal is desired

11. Class 1D: Small organic phase dispersed in continuous inorganic phase

12. Making Hybrid Materials: Class 1D (encapsulation of small organics) Polymerize metal oxide around organic pores must be small or leakage will occur Solid state dye lasers, filters, colored glass sunscreens Biopolymers Medicines Living cells Imprinting (artificial enzymes)

13. Class 1D: the organic dye is trapped within the silica network

14. Simple method for encapsulating dyes.

15. Easily recyclable colored bottles J. Livage

16. Organic dyes in a silica matrix fluorescence - laser - NLO - photochromism J. Livage

17. nonlinear hybrid C 60 -silica coated lenses Optical limiters

18. Absorption spectrum of the UV protecting film (1 µm) with and without the UV-absorber molecule (34 wt%). Chem. Soc. Rev., 2007, 36, 1270-1281 Preventing UV-light damage of light sensitive materials using a highly protective UV-absorbing Hybrid (Class 1D) coating

19. Visible absorption spectra of Photosystem I entrapped in sol–gel at intervals during the aging process compared with the solution spectrum of the native preparation. The spectrum of a control gel without PSI that was aged for 29 days is also shown H. O'Neill and E. Greenbaum, Chem. Mater., 2005, 17, 2654 Dyes are protected against photodegradation by Class 1D matrix

20. Fluorescent core–shell silica nanoparticles incorporating organic dyes with different spectral characteristics, covering the entire UV-vis absorption and emission wavelengths. (Reproduced from ref. 31, with permission. Copyright 2005 American Chemical Society.)ref. 31 H. Ow, D. R. Larson, M. Srivastava, B. A. Baird, W. W. Webb and U. Wiesner, Nano Lett., 2005, 5, 113

21. Sol-gel encapsulation of drugs in silica particles using microemulsions Water in oil emulsions

22. Chem. Soc. Rev., 2007, 36, 932-940 Enzymes in sol-gel Requires mild sol-gel (pH 7) Enzymes remain active longer than when in water Sensors and catalysts Science 1992, 255, 1113– 1115

23. Cyctochrome C encapsulated in dry aerogels Generally thought that water is needed for enzyme activity Aerogels made with cytochrome C have remained active NO sensors Amanda S. Harper-LeathermanAmanda S. Harper-Leatherman Langmuir, Article ASAP 2012

24. Chem. Mater., 2005, 17 (10), pp 2654–2661 Bio encapsulation: Photosynthesis system

25. Enclapsulation of liposomes in silica gel Langmuir, 1997, 13 (19), pp 5049–5053

26. Bacteria encapsulated within a silica matrix aged for (a) 1 month without glycerol and (b) 1 day with a layer of glycerol.silicaglycerol Encapsulating living cells in silica

27. Imprinting to make synthetic enzymes in hybrid materials

28. Chem. Mater., 2003, 15 (19), pp 3607–3613 Imprinting dopamine analogs into silsesquioxane modified silicas for sensors

29. Imprinting DDT into silsesquioxane modified silicas for sensors

30. C. Lin, A. Joseph, C.K. Chang, Y.C. Wang, Y.D. Lee Anal. Chim. Acta, 481 (2003), p. 175 Imprinting Caffeine into silica modified with silsesquioxane with non-bonding interactions

31. C.W. Hsu, M.C. Yang, J. Non-Cryst Solid, 354 (2008), p. 4037 Imprinting dopamine analogs into silsesquioxane modified silicas for sensors

32. Acc. Chem. Res., 2007, 40 (9), pp 756– 767 Imprinting that generates on optical signal when site recognizes molecule