Download presentation
Presentation is loading. Please wait.
Published byCameron Conley Modified over 9 years ago
1
Agenda 1. QUIZ 2. HOMEWORK LAST CLASS 3. HOMEWORK NEXT CLASS 4. TRANSMISSION MATHEMATICS a. dBs, NYQUIST & SHANNON b. NOISE 5. DIGITAL SYSTEMS 6. ANALOG AND ANALOG TO DIGITAL CONVERSIONS 7. ISDN 8. DSL
2
Homework Chapter 4: 10, 11, 12, 14, 15, 16, 22, 50, 54, 63 Chapter 5: 1, 3, 6, 7, 9, 14, 17, 32
3
Decibells & Logarithms Converting watts to dB (or milliwatts to dBm): 10 log 10 1000 watts = 30 dBw Converting dB to watts (or dBm to milliwatts): 30 dBw = log -1, or log -1 (3) or 10 raised to the 3rd power = 10 3 = 1000 watts 35 dBw = 10 3.5 = 3162.3 watts Note: There’s a point between the 3 & 5.
4
Decibells & Logarithms dBWWatts -3.5 0 1 3 2 6 4 9 8 10 20 100 30 1000 40 10000
5
Nyquist 1. Nyquist: The maximum practical data rate (samples) per channel. Max R = 2 H log 2 V Logarithmic function to the base 2: For each # V, log V = the exponent to which 2 must be raised to produce V. Then if V = 16, the log 2 of V = 4. If V = 2, the log 2 of V = 1. Then what is the maximum practical data rate for BPSK signal on a line with a bandwidth of 3000 Hz? What is the maximum practical data rate for a QPSK signal on a line with a bandwidth of 3000 Hz?
6
Shannon Shannon: The maximum theoretical data rate per channel. Max R = CBW x log 2 (1 + S/N) [CBW = H in Nyquist Theorem] Then what is the maximum practical data rate for signal with a 30 dB S/N on a line with a bandwidth of 3000 Hz?
7
Noise N = Noise Power = kTB, where B is bandwidth. (Used in Shannon’s Limit) N o = Noise Density = kT, where k is Boltzmann’s Constant (-228.6 dBw) (Used in Carrier to Noise ratios, i.e., C/N o ) T = SNT = System Noise Temperature (Used in radio and satellite link equations, e.g., G/T is a measure of quality in satellite link equations.)
8
Chapter 4 Signals
9
Figure 4-1 Comparison of Analog and Digital Signals
10
Figure 4-2 Example of Periodic Signal
11
Figure 4-3 Example of Aperiodic Signal Aperiodic signals are _____________? Inconsistant
12
Figure 4-4 A Sine Wave
13
Figure 4-5 Amplitude
14
Figure 4-6 Period and Frequency
15
Figure 4-7 Relationship between Different Phases
16
Figure 4-8 Amplitude Change Amplitude relates to ___________? S in S/N
17
Figure 4-10 Phase Change Phase shift relates to ______________? Phase shift keying
18
Figure 4-11 Time and Frequency Domains
19
Figure 4-12 Time and Frequency Domains for Different Signals
20
Figure 4-13 A Signal with a DC Component
21
Figure 4-14 Composite Waveform
22
Figure 4-15 Bandwidth
23
Figure 4-16 Example 4.8
24
Figure 4-17 Example 4.9
25
Figure 4-19 Bit Rate and Bit Interval
26
Figure 4-20 Harmonics of a Digital Signal
27
Figure 4-21 Exact and Significant Spectrum
28
Chapter 5 Encoding
29
Figure 5-3 Types of Digital to Digital Encoding
30
Figure 5-5 Types of Polar Encoding
31
Figure 5-6 NRZ-L and NRZ-I Encoding
32
Figure 5-7 RZ Encoding
33
Figure 5-8 Manchester and Diff. Manchester Encoding
34
Figure 5-9 Types of Bipolar Encoding
35
Figure 5-10 Bipolar AMI Encoding
36
Figure 5-15 Analog to Digital Conversion
37
Figure 5-16 PAM
38
Figure 5-17 Quantized PAM Signal
39
Figure 5-19 PCM
40
Figure 5-20 From Analog Signal to PCM Digital Code
41
Figure 5-21 Nyquist Theorem This assumes what?
42
Figure 5-27 FSK
43
Figure 5-28 Baud Rate and Bandwidth in FSK
44
Figure 5-29 PSK Why do you think PSK is better than FSK? Needs less power per bit
45
Figure 5-30 PSK Constellation
46
Figure 5-31 4-PSK
47
Figure 5-32 4-PSK Characteristics
48
Figure 5-33 8-PSK Characteristics
49
Figure 5-34 Baud Rate and Bandwidth in PSK
50
Figure 5-35 4-QAM and 8-QAM Constellations
51
Figure 5-44 Frequency Modulation
52
Figure 5-45 FM Bandwidth
53
Integrated Services Digital Network (ISDN) Standard 1. A major TELCO attempt to integrate voice and non-voice services. 2. Integrated multiple channels interleaved with time division multiplexing. A - 4 KHz analog telephone channel B - 64 Kbps digital PCM channel for voice or data C - 8 or 16 Kbps digital channel D - 16 Kbps digital channel for out of band signalling E - 64 Kbps channel for internal ISDN signalling H - 384, 1536, or 1920 Kbps digital channel Basic Rate = 2B + 1D (the nominal 128 frequently used in homes) Primary Rate = 23 B + 1D
54
Integrated Services Digital Network (ISDN) Standard TE 1 ISDN Terminal TE 1 ISDN Telephone Non-ISDN Terminal TA S S S R ISDN PBX NT1 ISDN Exchange T U R, S, T & U are CCITT defined reference Points TA is terminal adapter
55
Digital Subscriber Line (DSL) Standard Drivers: ISDN didn’t capture significant market share for TELCOs Higher speed applications require new technologies Users want to stay connected longer High cost of converting infrastructure Telephone lines weren’t designed to provide simultaneous digital and analog services Competition from satellite (e.g., DirectTV/Direct PC) & cable industry
56
Digital Subscriber Line (DSL) Standard Services Type DSLSpeed Asymmetric DSL1.5 to 8 Mbps to user 16 to 640 Kbps to network High-data-rate DSL1.544 Mbps to and from user Single-line DSL768 Kbps full duplex on a pair Rate-adaptive DSL1.5 to 8 Mbps to user 16 to 640 Kbps to network (can adjust speeds) Consumer DSL1 Mbps to user 16 to 128 Kbps to network (does not include splitter) ISDN DSLBasic ISDN rate Very-high-data-rate DSL13 to 52 Mbps to user 1.5 to 6 Mbps to network
57
DSL Rates (using 24 gauge wire) Connection Max Data Rate Distance Limit ADSL 1.5-8 Mbps downstream 12-18 K feet Up to 1.544 Mbps upstream HDSL T1 - 1.544 Mbps (4 wire) 12,000 feet IDSL 144 Kbps (symmetric) 18,000 feet (36 w rptr) SDSL T1 - 1.544 Mbps (2 wire)11,000 feet VDSL 13-52 Mbps downstream1-4.5 K feet 1.5-2.3 Mbps upstream Up to 34 Mbps Symmetric R-ADSL 1.5-8 Mbps downstream12-18 K feet Up to 1.544 Mbps upstream
58
DSL Network Configuration
59
Asymmetric DSL Characteristics Uses frequency division multiplex occupying spectrum above voice Principal modulation scheme is Discrete multitone (DMT), a quadrature amplitude modulation coding technique developed by Bell Labs (ANSI T1.413 standard) Can be mapped into higher layer protocol mechanisms that can include IP frames or ATM cells Can interface to Simple Network Management Protocol (SNMP) for operations, administration and management 0-4 KHz 25KHz 200KHz 1.1MHz To Network To User
60
Cable Modem DSL Access
61
Serving CO Who Fixes The Network? Hub office DSLAM ADM DWDM Internet DWDM ATM Network Verizon ILECVerizon ILEC Worldcom Verizon Advanced DataVerizon Advanced Data Verizon Advanced Data AOL ADM LECNAP LEC NAP BackboneNAP NSP Application e-business Content Provider
62
Providers Ask Two Pivotal Questions Is the network service up and running properly? If it’s not, where’s the problem and how do we fix it? and how do we fix it?
63
LEC The Answer... trading partnersintegratedservice assurance Providers must tightly link their operations with their trading partners through integrated service assurance NAP NSP
64
Service Assurance Market Test & Measurement Operations Support Systems Service Assurance $3.5B* in 2000 $8.4B* in 2004 Growing at 25% Includes OSS software, services, and remote probes Key players: Spirent Communications, Telcordia, Lucent, Acterna (TTC/WWG), Micromuse * RHK Estimates
65
Service Assurance Activities Monitor SLAs Report Allocate Resources Determine SLA Violations Test Isolate Root Cause Detect Alarms/Events Detect Performance/Traffic Problems Decide Repair
66
Network “Communication” is Key Need to provide service information within and between networks LEC NAP NSP
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.