1. New Features/Functions Ver.3
KX-TDA/TDE/NCP
New Features/Functions Ver.3
Panasonic Communications CO.,LTD.

2. Enhanced SD or Enhanced Key“
New Features/Functions
The following new features/functions are available from,
- TDE MPR 3.0
Enhanced SD or Enhanced Key
Note
Conference feature improvement No
MEC is needed.
Enhanced Common Extension Feature
(Common extension numbering for 2 or more PBXs)
Yes
CLIP of extension which set C-Fwd can be set to ISDN Network by programming option.
Improved ARS function. (Dial 011 and 01 is supported)
128 IP-PT by MPR card is supported.
Display power unit type.
Sales company mode
FAX auto transfer via ESVM
Max. IP trunk simultaneous call (SIP-Trunk + H.323 G/W) 32 ➔ 64

3. Enhanced SD or Enhanced Key“
New Features/Functions
The followings are minor modification from,
- TDE MPR 3.0
Enhanced SD or Enhanced Key
Note
Official support for KX-DT3xx No
American PRI caller ID support.
Canadian PRI caller name support
Max. Number of A/K 40 ➔100

4. New Conference Function
(8-Party Conference and Broadcast)

5. 8-Party Conference and Broadcast -1“
8-Party Conference and Broadcast -1
Outline
- A PT (Owner) can call multiple parties, assigned as members of a conference group.
- Max. 8 conference groups can be programmed.
- 2 Conference Mode:
- 8-Party Conference Mode (Owner + 7 members): Two-way communication.
- Broadcast Mode (Owner + 31 members): One way communication.
Cannot mix Broadcast or Conference feature - not possible on same system.
External
External terminals (ISDN/Analogue) can be members of a conference group.
ISDN
Analogue
A MEC card is needed.
Owner
QSIG extensions (Remote office) can be member of a conference group.
MEC
QSIG
Local
Remote

6. 8-Party Conference and Broadcast - 2“
8-Party Conference and Broadcast - 2
8-Party Conference Mode
Owner
Two-way
Max. 7 Members
One way
N/A
Broadcast Mode
Owner
Two-way
N/A
One way
Max. 31 Members
The Owner can control local PBX members.
Owner
Two-way
Max. 7 Members
One way
Max. 24 Members

7. 8-Party Conference and Broadcast - 3“
8-Party Conference and Broadcast - 3
The number of simultaneous conference calls
Group-1
Owner
Two-way
One way
N/A
Group-x
Owner
Two-way
N/A
One way
Total
32 Terminals
Group-8
Owner
Two-way
One way

8. 8-Party Conference and Broadcast - 4“
8-Party Conference and Broadcast - 4
Member Control (8-Party Conference Mode)
Available terminals
Local PBX Extensions
External parties
ISDN/Analogue
Non-listed Ext.
Can Join
Owner
Two-way
Max. 7 Members
One way
IN/OUT
Disconnect
The Owner can control local PBX members.

9. 8-Party Conference and Broadcast - 5“
8-Party Conference and Broadcast - 5
Member Control (Broadcast Mode)
Available terminals
Local PBX Extensions
External parties
ISDN/Analogue
Non-listed Ext.
Can Join
Owner
Two-way
Max. 7 Members
One way
IN/OUT
Disconnect
The Owner can control local PBX members.

10. 8-Party Conference and Broadcast - 6“
8-Party Conference and Broadcast - 6
8-Party Conference Mode
Owner
System Programming
8-party conference
Total 8 parties

11. 8-Party Conference and Broadcast - 7“
8-Party Conference and Broadcast - 7
Broadcast Mode
Owner
System Programming
31 Broadcasting
Total 32 parties

12. 8-Party Conference and Broadcast - 8“
8-Party Conference and Broadcast - 8
Owner Extension
System Programming
Can be
- D-PT
- IP-PT
- PBX-DECT
Should be “Enable”
Cannot be
- SLT
- ISDN-Ext.
- SIP Ext.
- External Caller

13. 8-Party Conference and Broadcast - 9“
8-Party Conference and Broadcast - 9
Conference Groups
System Programming
System Program
Max. 8 Groups

14. 8-party conference members“
8-Party Conference and Broadcast - 10
Members (8-party Conference Mode)
System Programming
8-party conference members
Max.7

15. 8-Party Conference and Broadcast - 11“
8-Party Conference and Broadcast - 11
Members (Broadcast Mode)
System Programming
Max.31
31Broadcast members

16. 8-Party Conference and Broadcast - 12“
8-Party Conference and Broadcast - 12
Members
System Programming
20１
202
203
301
302
Member
Can be
- PT/SLT/ISDN
- PS
- SIP
- TIE Extension
- External line
(ISDN/Analogue)
Cannot be
- ICD-Group
- PS Ring Group
- VM Group
- External Pager
DISA

17. 8-Party Conference and Broadcast - 13“
8-Party Conference and Broadcast - 13
Make a conference
From an owner Extension,
Normal mode : Dial *32 + Conference group number + #
Security mode : Dial *32 + Conference group number + Conference Password + #
LCD: Calling / Called Extension
Conference1: PCCUK
When a member of the group answers the call.
LCD: Calling Extension
LCD: Called Extension
No of member
Conference : 2
Conference

18. 8-Party Conference and Broadcast - 14“
8-Party Conference and Broadcast - 14
If a member does not answer the call?
System Programming
Ringing stops via a pre-programmed timer.

19. 8-Party Conference and Broadcast - 15“
8-Party Conference and Broadcast - 15
Member Control (8-party Conference Mode)
Dial *32 + conference group number #
➔ Extension answers (All Extension are in conference mode).
Group-1
7 Members
Multi party
Conference
20１
202
203
Owner
201
Two Way
202
201
202
203
DSS
203

20. 8-Party Conference and Broadcast - 16“
8-Party Conference and Broadcast - 16
Member Control (8-party Conference Mode)
➔ Press “DSS” button (Owner) ➔ Remove the member from conference mode ➔ Press “DSS” button (Owner) again ➔ Establish the conversation again.
(Similar Operation can be done by the CONF/TRANSFER keys.)
Group-1
7 Members
Multi party
Conference
20１
202
203
Owner
DSS
201
201
Two Way
DSS
202
202
201
202
203
203
One Way
DSS

21. *32# + Conference group number + #“
8-Party Conference and Broadcast - 17
Member Control (8-party Conference Mode)
Non listed Member:
Dial *32# + Conference group number + # ➔ Join the conference.
Group-1
7 Members
Multi party
Conference
20１
202
203
Owner
201
Two Way
202
KX-HGT100
Possible
If a customer needs security, please use the security conference mode.
201
202
203
203
DSS
*32# + Conference group number + #
204
204

22. 8-Party Conference and Broadcast - 18“
8-Party Conference and Broadcast - 18
Make a conference (Security Mode)
From an owner Extension,
Dial *32 + Conference group number + Conference password + #
Conference password : 1-8 digits (0-9) or *: Owner can decide when making the conference.
Group-1
7 Members
Multi party
Conference
If the owner uses * as conference password, nobody can join the conference.
Owner
201
Two Way
202
201
202
203
203
*32# + Conference group number +
Conference password + #
DSS
204
204

23. 8-Party Conference and Broadcast - 19“
8-Party Conference and Broadcast - 19
Member Control (Broadcast Mode)
Dial *32 + conference group number # ➔ Extension answers (All Extension are in Broadcasting mode).
Group-1
7 Members
Multi party
Conference
20１
202
203
204
Owner
201
Two Way
202
203
One Way
204

24. 8-Party Conference and Broadcast - 20“
8-Party Conference and Broadcast - 20
Member Control (Broadcast Mode)
➔ Press “DSS” button (Owner) ➔ Establish the conversation.
Max. 7 Broadcasting Members can join a multi party conference.
Group-1
7 Members
Multi party
Conference
DSS (201) In
20１
202
203
204
Owner
201
201
Two Way
DSS (202) In
202
202
201
202
203
Max.7
203
One Way
DSS
204

25. 8-Party Conference and Broadcast - 21“
8-Party Conference and Broadcast - 21
Member Control (Broadcast Mode)
➔ Press “DSS” button (Owner) ➔ Remove the member from conference mode.
Group-1
7 Members
Multi party
Conference
DSS (201)
Out
20１
202
203
204
Owner
201
201
Tow Way
DSS (202)
Out
202
202
201
202
203
203
One Way
DSS
204

26. 8-Party Conference and Broadcast - 22“
8-Party Conference and Broadcast - 22
Member Control (Broadcast Mode)
If a Broadcasting member wants to join,
➔ Press “200 DSS” button (Ext.201) ➔ Off-hook call tone on the owner Ext.
➔ Press “201 DSS” button (Owner) ➔ Establish the conversation.
Group-1
7 Members
Press “DSS”
Multi party
Conference
I want to join (Meet Me)
200
202
203
Owner
201
Two Way
200
DSS
202
Off-hook call tone
203
This function is only possible on local extensions.
Not possible: Remote Extensions
External Parties

27. 8-Party Conference and Broadcast - 23“
8-Party Conference and Broadcast - 23
Member Control (Broadcast Mode)
When 7 broadcasting member are in the same multi party conference, the 8th member cannot join to the multi party conference,
Group-1
7 Members
Multi party
Conference
20１
202
203
204
205
206
207
208
Owner
201
Two Way
202
203
201
202
203
204
205
207
Max.7
Cannot join
DSS
208

28. 8-Party Conference and Broadcast - 24“
8-Party Conference and Broadcast - 24
Member Control (Remote Ext./External Party)
Join Conference
Possible:
- Local Extensions
- External parties through ISDN
- External parties through Analogue
Not Possible:
- Remote Extensions
External
External
ISDN
Analogue
Great !!!!
Yes
QSIG No
Yes
Local
Remote
Owner
Conference

29. External Party Numbers“
8-Party Conference and Broadcast - 25
Member Control (Remote Ext./External Party)
Conference Member Programming
External
External
20１
202
203
477-xxxx
577-xxxx
External Party Numbers
ISDN
Analogue
Great !!!!
Yes
NB:
The PBX cannot see an analogue line call status (E.g. Answer, Disconnect) , therefore the PBX does not release the line until the conference is finished.
Owner
Conference

30. 8-Party Conference and Broadcast - 26“
8-Party Conference and Broadcast - 26
Member Control (Remote Ext./External Party)
If a PBX owner does not want an employee to make a conference with external party, please set the reserved bit 07-6 to “Enable”
External
External
ISDN
Analogue
Sales Company Mode
Yes
Reserved bit 07-6
Enable : Not possible
Disable : Possible (Default)
Owner
Conference

31. 8-Party Conference and Broadcast - 27“
8-Party Conference and Broadcast - 27
Member Control (How to Join from External Party - 1)
External
1- Dial to DISA
3- Dial *47+ *Verification Code + PIN
or Dial *47 + Ext. No. + PIN
5- Dial *32# + Conference group number +
Conference password + #
ISDN
Analogue
2- DISA answers
Join Conference
DISA
4- Confirmation Tone
An external caller cannot start a conference via DISA.
Owner
Conference

32. 8-Party Conference and Broadcast - 28“
8-Party Conference and Broadcast - 28
Member Control (How to Join from External Party - 2)
External
CLIP
1- Dial to DISA
3- Dial *32# + Conference group number +
Conference password + #
ISDN
Join Conference
2- DISA answers
System Speed Dial (SSD) Entry
000: : CLI Ext.201
DISA
Enhanced SD or Enhanced Key
An external caller cannot start a conference via DISA.
Owner
Conference

33. 8-Party Conference and Broadcast - 29“
8-Party Conference and Broadcast - 29
System Programming
Default: Disable
Option: Enable
System Programming (System Speed Dial)
Tanaka
Yamada
Toyota

34. 8-Party Conference and Broadcast - 30“
8-Party Conference and Broadcast - 30
Member Control (Remove member)
➔ Press “FLASH/RECALL” button ➔ Remove (Disconnect) the member who joined the Multi party conference last.
Multi party Conference Join Order
1st 201
2nd 203
The last
Group-1
Out of Conference
Multi party
Conference
One way
201
Two Way
FLASH/RECALL
Owner
202
201
202
203
204
Disconnect
203
203
204

35. 8-Party Conference and Broadcast - 31“
8-Party Conference and Broadcast - 31
Member Control (Remove member)
➔ Press “FLASH/RECALL” button ➔ Remove (Disconnect) the member who joined the Multi party conference last.
Multi party Conference Join Order
1st 202
2nd 201
The last
Group-1
Out of Conference
Multi party
Conference
Disconnect
201
201
Two Way
FLASH/RECALL
Owner
202
201
202
203
204
203
204

36. 8-Party Conference and Broadcast - 32“
8-Party Conference and Broadcast - 32
Member Control (Remove member)
➔ Cannot directly control a member (Disconnect by Flash/Recall button) in the one way area.
Multi party Conference Join Order
1st 202
2nd 201
Group-1
Out of Conference
Multi party
Conference
One way
201
Two Way
Owner
202
201
202
203
204
Disconnect
203
204

37. 8-Party Conference and Broadcast - 33“
8-Party Conference and Broadcast - 33
Member Control (Remove member)
Question: How to disconnect the one way members.
Multi party Conference Join Order
1st 202
2nd 201
Group-1
Out of Conference
Multi party
Conference
One way
201
Two Way
Owner
202
201
202
203
204
Disconnect ?
203
204

38. 8-Party Conference and Broadcast - 34“
8-Party Conference and Broadcast - 34
Member Control (Remove member)
➔ Can control (Disconnect by Flash/Recall button) an external party.
Multi party Conference Join Order
1st 201
2nd 202
3rd 203
4th External
Group-1
Out of Conference
Multi party
Conference
One way
201
Two Way
FLASH/RECALL
Owner
202
201
202
203
CO1
203
Disconnect

39. 8-Party Conference and Broadcast - 35“
8-Party Conference and Broadcast - 35
System Programming
Group-1
Multi party
Conference
The Owner extension “Flash Mode” should be “Flash Recall” Mode.
201
Two Way
Owner
202
Out of Conference
201
202
203
204
203
204

40. 8-Party Conference and Broadcast - 36“
8-Party Conference and Broadcast - 36
Conditions, if an extension has,
Set to C-FWD ? ➔ The broadcast call arrives this extension.
Set to DND ? ➔ The broadcast call does not arrive this extension.
Busy ? ➔ Call waiting function will be performed.
Auto Answer ➔ The Auto Answer function will not be performed.
SXDP-PS ? ➔ The broadcast call does not arrive this PS.
Internal Call Block is Block ➔ The broadcast call does not arrive this extension.
Other Conditions
If owner extension has DSS key of a member of broadcasting group and establishes a broadcasting call, the DSS key does not flash when the called extension rings.
It actually turns red (not flashing).

41. Enhanced Common Extension Feature Common extension numbering for 2 or more PBXs

42. Enhanced Common Extension Feature - 1“
Enhanced Common Extension Feature - 1
Common Extension over multi PBX Connection
Common Extension numbering function is an Enhanced function.
➔ Enhanced A/K/SD card is required.
Office-2
102
DSP
H323 G/W
Office-3
Office-1
DSP
H323 G/W
DSP
H323 G/W
IP Net
103
101
DSP
H323 G/W
How to Program ?
104
Office-4

43. Enhanced Common Extension Feature - 2“
Enhanced Common Extension Feature - 2
GW Setting and DN2IP
Office-1
Office-2
Office-3
Office-4
Ext.
Destination IP
102
101
103
104
Only 512 Entries
Not easy

44. Enhanced Common Extension Feature - 3“
Enhanced Common Extension Feature - 3
Enhanced Common Extension Operation
All PBX have to be TDE/NCP MPR 3.0.
TDE/NCP MPR 3.0
102
DSP
H323 G/W
TDE/NCP MPR 3.0
TDE/NCP MPR 3.0
DSP
H323 G/W
DSP
H323 G/W
IP Net
103
101
DSP
H323 G/W
104
TDE/NCP MPR 3.0

45. Enhanced Common Extension Feature - 4“
Enhanced Common Extension Feature - 4
GW Setting and DN2IP
Program Point
Very easy !!!!
This function is available on Virtual-IPG/W-16, not on Physical IP-GW16.

46. Enhanced Common Extension Feature - 5“
Enhanced Common Extension Feature - 5
How to works
102
3- It is not mine
1- Dial 103
2- Setup
IP Net
5- Setup
103
101
4-Hunting

47. Enhanced Common Extension Feature - 6“
Enhanced Common Extension Feature - 6
Logically, it is possible to connect Max.100 PBXs.
Why 100 PBXs?
Office-2
101
Office-xx
Office-1
IP Net xx
1xx
100
199
Office-100

48. Call-FWD CLIP

49. Call-FWD CLIP - 1 “ Previous Function Subscriber-A CLIP 477-1111
My Extension
CLIP
Subscriber-A
CLIP 1
C-FWD to my cellular
ISDN 2 4 3
CLIP =
My cellular
1- Subscriber-A (CLIP ) calls your extension.
2- The call is re-routed to your cellular.
➔ CLIP =
3- The ISDN provider does not accept “CLIP= ”
Because, is Out of DDI range
4- The ISDN provider sends the main DDI number “ ” to the C-FWD destination.
➔ But, I want to have CLIP=

50. Please select “Disable”
Call-FWD CLIP - 2
New Function
My Extension
CLIP
Subscriber-A
CLIP 1
C-FWD to my cellular
ISDN 2 4 3
CLIP =
My cellular
Please select “Disable”

51. Call-FWD CLIP - 3 “ OR TDA/TDE Previous (FYI) CO-to-CO CO-to-CO ISDN
Ext. 101
CLIP :
C-FWD
Caller’s CLIP:
CO-to-CO
ISDN
CLIP:
Received CLIP:???????? OR
Ext. 101
CLIP :
C-FWD
Caller’s CLIP:
CO-to-CO
ISDN
CLIP:
Received CLIP:

52. Call-FWD CLIP - 4 “ Previous Countermeasure (FYI)
Ext. 101
CLIP :
C-FWD 601
ICD-Group Ext.601
Ext. 501 (Dummy PS)
CO-to-CO
ISDN
CLIP:
Dummy PS setting
Ext. 501 (FWD )
Ext. CLIP:
Received CLIP:
- Enhanced SD card is needed.
- Program is complicated.
501

53. Improved ARS function

54. Improved ARS function - 1“
Improved ARS function - 1
Previous ARS Function
Dial 9/0 0xxx
ISDN
Analogue
ARS=ON
Need more flexible ARS routing plan.
ARS Routing Table
Leading Number
Routing Plan 1 01 2
011 3
0111 4
Dial 9/0 0xxx
Dial 9/0 01xx
Dial 9/0 011x
Dial 9/0 0111x
Every Time, the routing plan-1 is selected.

55. Improved ARS function - 2“
Improved ARS function - 2
New ARS Function
ARS Routing Table
Leading Number
Routing Plan 1 01 2
011 3
0111 4
Dial 9/0 0X(e1)
the routing plan-1
Dial 9/0 01X(e1)
the routing plan-2
Dial 9/0 011X(e1)
the routing plan-3
Dial 9/0 0111X
the routing plan-4

56. Improved ARS function - 3“
Improved ARS function - 3
New ARS Function
ARS Routing Table
Leading Number
Routing Plan 1 01 2
011 3
0111 4
Dial 9/0 02
the routing plan-1
Dial 9/0 (CO access Code)
Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number.
Dial 2 ➔ Matched 0 ➔ Select the routing plan-1

57. Improved ARS function - 4“
Improved ARS function - 4
New ARS Function
ARS Routing Table
Leading Number
Routing Plan 1 01 2
011 3
0111 4
Dial 9/0 012
the routing plan-2
Dial 9/0 (CO access Code)
Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number.
Dial 1 ➔ Matched 01, 011, 0111 ➔ Wait next number.
Dial 2 ➔ Matched 01 ➔ Select the routing plan-2

58. Improved ARS function - 5“
Improved ARS function - 5
New ARS Function
ARS Routing Table
Leading Number
Routing Plan 1 01 2
011 3
0111 4
Dial 9/0 0112
the routing plan-3
Dial 9/0 (CO access Code)
Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number.
Dial 1 ➔ Matched 01, 011, 0111 ➔ Wait next number.
Dial 1 ➔ Matched 011, 0111 ➔ Wait next number.
Dial 2 ➔ Matched 011 ➔ Select the routing plan-3

59. Improved ARS function - 6“
Improved ARS function - 6
New ARS Function
ARS Routing Table
Leading Number
Routing Plan 1 01 2
011 3
0111 4
Dial 9/0 0111
the routing plan-4
Dial 9/0 (CO access Code)
Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number.
Dial 1 ➔ Matched 01, 011, 0111 ➔ Wait next number.
Dial 1 ➔ Matched 011, 0111 ➔ Wait next number.
Dial 1 ➔ Matched 0111 ➔ Select the routing plan-4

60. Improved ARS function - 7“
Improved ARS function - 7
New ARS Function
ARS Routing Table
Leading Number
Routing Plan 1 01 2
011 3
0111 4
Dial 9/0 0 + No dial
the routing plan-1
Dial 9/0 (CO access Code)
Dial 0 ➔ Matched 0, 01, 011, 0111 ➔ Wait next number.
No dial ➔ “Inter-digit Timer” has ended. ➔ Select the routing plan-1

61. Improved ARS function - 8“
Improved ARS function - 8
If a customer wish to use the previous Function
There is no option setting to disable the new function.

62. 128 IP-PT by MPR card is supported.

63. “
128 IP-PT - 2
TDA/TDE MPR 3.0 (128 IP-Extensions)
128 = 32 x 4

64. 128 IP-PT - 3 “ TDA/TDE MPR 3.0 (128 IP-Extensions) 128 = 32 x 4
128 SIP Extension is possible.

65. Display power unit type

66. Display power unit type“
Display power unit type
Command
Power unit type
Sales company log in mode.

67. FAX auto transfer via ESVM

68. FAX auto transfer via ESVM“
FAX auto transfer via ESVM
TDA/TDE Previous MPR
We can not use ESVM/B-ESVM
TDA/TDE MPR 3.0
We can use ESVM (not B-ESVM).

69. Max. IP trunk simultaneous call

70. Max. IP trunk simultaneous call - 1“
Max. IP trunk simultaneous call - 1
TDA/TDE Previous MPR
DSP
SIP G/W 32ch
Total Max.32 calls
H.323 G/W 32ch
TDA/TDE MPR 3.0
DSP
SIP G/W 32ch
Total Max.64 calls
H.323 G/W 32ch

71. Max. IP trunk simultaneous call - 2“
Max. IP trunk simultaneous call - 2
Max. 32 calls (Default)
Max. 64 calls (Option)
Sales Company Mode
Reserved bit 06-7
Enable : 64 Calls

72. Thank You Very Much
For Your Attention