1. Document Title/Description1 Schematic view 1 2 4 3 5 6 7 8 9 Van de Graaff Generator A Van de Graaff generator is made by a belt of a flexible dielectric material, running over two rollers (wheels), one of which is surrounded by a hollow metal ball. 1.Power Supply that pulls off electrons. 2, 4.Rollers. 3.Positively charged belt (lost some electrons) 5.Metal comb that drops electrons from the ball onto the belt. 6.Metal ball that gives up electrons to the belt, then it is charged! 7.Negatively charged belt (gained some electrons from the ball). 8. Grounding wand, it can give or take electrons to make everything even again. 9.Discharge: A spark, a flow of electrons through the air. The bigger the ball, and farther from the ground it is lets you build more charge up on it.

2. Document Title/Description2History The fundamental idea of friction machine as high voltage supply traces back to 17 th Century. Generator invented to supply the high energy needed for early particle accelerators. The first model was demonstrated in October 1929, using a silk ribbon bought at a five and dime store as the charge transport belt. Originally used as a research tool in early atom-smashing and high energy X-ray experiments. 1931, Robert J. Van de Graaff (left) poses with his electrostatic generator and Karl T. Compton, MIT president

3. Document Title/Description3 Recent Developments Tandem Van de Graaff accelerator –Contains one or more Van de Graaff generators. –Negatively charged ions are accelerated through a potential difference then stripped of electrons and accelerated again. Pelletron –Belt is replaced by a chain of short conductive rods connected by insulating links. –Air-ionizing electrodes are replaced by a grounded roller and inductive charging electrode. –Can be operated at much higher velocity than a belt, so both the voltage and currents attainable are higher than a conventional Van de Graaff machine. The largest VDG generator, on display at the Boston Museum of Science