1. An Intern’s Guide to basic WMS 2011 setup in just 8 easy steps © 2011 Microsoft Corporation By: Livi Erickson

2. Step 1: Download ISO file http://www.microsoft.com/downloads/en/details.aspx?FamilyID=3188 a587-3542-4dda-99b3-551cdabe581f

3. Step 2: Burn ISO file to disk / flash drive

4. Repeat for each station Each station: -USB Hub -Monitor -Keyboard -Mouse To set up a station: -Plug USB hub into host computer -Plug in monitor to computer -Plug in keyboard / mouse to hub Step 3: Set Up Hardware

5. Step 4: Boot MultiPoint computer from disk / flash drive

6. Step 5: Go through software setup Select Local Settings Accept License Terms Choose Install Location

7. Step 6: Configure MultiPoint Settings Choose options and continue with install

8. Step 7. Install Display Drivers (if prompted) Log in as administrator (WMS will be in maintenance mode) Search on internet for the 64- bit display driver for your graphics card(s) Download and install Restart in normal mode

9. Step 8: Map stations Each station connected should have this screen displayed

10. Windows MultiPoint Server Planning Guide: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=501ba465- 382f-41cb-bbea-b9bf580e2bb2 Windows MultiPoint Server Planning Guide: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=7e762ce6- 562d-449d-be0d-52c0103edf60 MultiPoint Online: Home page: www.microsoft.com/multipointwww.microsoft.com/multipoint Twitter: @msmultipoint Youtube: www.youtube.com/msmultipointwww.youtube.com/msmultipoint Facebook: www.facebook.com/windowsmultipointserverwww.facebook.com/windowsmultipointserver Ask a Question: http://social.technet.microsoft.com/Forums/en- US/windowsmultipointserver/threadshttp://social.technet.microsoft.com/Forums/en- US/windowsmultipointserver/threads Additional Resources