1. PSDC 2011 1Q Work Review John Zhao Chair, PSDC April 22, 2011 HangZhou

2. CONTENT Standards & Regulation LOBBY  Food Contact Resins & Articles  Automobile Plastics  Construction Plastics  Electrical Plastics  Plastics Sustainability Advocacy Sustainability ADVOCACY  Thanks to Contributors (March 23) AICM AGM Brief

3.  On Mar 23, 2011, AICM Annual General Meeting (AGM) was held successfully in Shanghai. 41 representatives from 21 member companies participated, and 36 representatives from 17 member companies got outstanding contribution awards. Outstanding Contribution PSDC Representatives  John ZhaoDuPont, Outstanding Chair  Gao RenjunDOW CHEMICALS  Sam BianSABIC (PSDC & RAC )  Sharp TanDuPont  Steven YuBASF  Shesha SayeeExxonMobil Behind every success, we recall every single member’s hard working and countless efforts. AICM Annual General Meeting (AGM)

4. CONTENT Standards & Regulation LOBBY  Food Contact Resins & Articles  Automobile Plastics  Construction Plastics

5. Major Activities Standards & Regulation LOBBY DATETaskforceActivityParticipantsGov. Agency Jan.20PSDC 1st Quarterly Meeting 20X Jan.21Food Contact Food Packaging Materials Workshop 41MOH Mar.16Construction Visiting Sichuan Fire Research Institute 3SCFRI Mar.17Automobile CAMDS Recycling Materials Workgroup 3CATARC Mar.23Food Contact MOH Food Related Products Committee Experts Meeting 2MOH, Sh-FDA Mar.25Automobile CAMDS training 2CATARC Apr.15Food Contact MOH Food Contact Resins & Articles Regulation/Standards System 5MOH, Sh-FDA Apr.22PSDC 2nd Quarterly Meeting 25 or soX

6.  Food Contact Resins & Articles  PSDC and RAC together organized “Food Packaging Materials” workshop, inviting officials from MOH and MOH/CDC, and got Food Contact Clean-up project update  submitted the comments on 1 st batch positive food- packaging resins and additives released by MOH  submitted the position paper on food packaging resins containing BPA  proactively attended MOH experts meeting of Food Related Product Commission  were invited to join the meeting discussing on Regulation & Standard System Framework of Food Contact Materials, by MOH

7.  Automobile Plastics  Attended the start-up meeting of Automotive Recycling Materials Workgroup by CATARC/CAMDS, which draws great attention from vehicle raw materials providers (where CATARC is China Automotive Technology and Research Center, head-quartered in Tian Jin with a branch in Beijing)  Designed questionnaire about CAMDS training, then investigated AICM members, and got more than 15 companies feedback so far. Almost of replied companies need the training or re-training.  Attended the CAMDS training (TF leader and AICM staff), evaluating its effect so as to communicate with CATARC to tail the specific training course meeting with AICM members interest.  Help CATARC to improve CAMDS polymers classification and related terminology phrases.

8.  Construction Plastics  Visited SiChuan Fire Research Institute (SCFRI), under Ministry of Public Security (MPS), meeting China PU Association by coincidence  SCFRI now is revising the standards about fire-control construction materials, “Requirements and Mark on Burning Behavior of Fire Retarding Products in Public Place” (GB 20286), and “Classification for Burning Behavior of Building Materials and Products” (GB 8624)  Witnessed on-site burning test in SCFRI, and exchanged the thoughts on PU, PS and other materials using as out-of-wall heat-insulation material.  Inviting officials from SCFRI to give a speech on workshop in July or August.

9.  Electrical Plastics  Continuously follow up China RoHS Standard Workgroup, under control by MIIT. Only solicited comments on “Requirement of Restricted Substances Management System of EEP”, and no more update so far.  The group will have a 2011 annual meeting in May (10~11) in Xi’An,  Work review of 2010;  Work priorities and emphasis;  Comments review of above-mentioned requirement;  China RoHS regulation update;  European RoHS update; And Association of China Quality Management Association of Electronics Industry (CQAE) will also have a same content meeting in Shanghai in May (13- 14).

10. CONTENT  Plastics Sustainability Advocacy Sustainability ADVOCACY A Long-term Project to build up Positive Image of Plastics! Responsible Use of Plastics!

11.  Sustainability Advocacy  For LCA, to organize a workshop, inviting Prof. WANG HongTao of SiChuan University to introduce China LCA research, especially in Chemical industry.  Respectively visited Junior Achievements China (JA China, non-profit organization), and China Environment and Sustainable Development Education Center (under MEP Env. Devlp Center), for the possibility creating a curriculum about plastics advantage and correct using, to teach the knowledge in primary school and high school.  A long-term project with continuous input;  Should create a teaching textbook and guidance in advance;  Training teachers or volunteers;  May join “Cool China” program under MEP;  Community Activity  start-up investment is a big issue (around 200,000);

12. Thank You!