1. Rebis 2.6 Kernel QTE-ARM TouchScreen

2. 2  vi /root/work/env/qte_arm_env_26  cat /root/work/env/qte_arm_env_26  export QTDIR=/root/work/qt/qte_arm_26  export PATH=$QTDIR/bin:$PATH  export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$QTDIR/lib QTE-ARM-26 환경설정 파일

3. 3  pwd  /root/work/qt  wget ftp://ftp.trolltech.com/qt/source/qt-embedded-free-3.3.3.tar.gz QTE-ARM-26 Download

4. 4  tar xvfz /root/work/qt/qt-embedded-free-3.3.3.tar.gz  mv qt-embedded-free-3.3.3 qte_arm_26  source /root/work/env/rebis_26_env  source /root/work/env/qte_arm_env_26  cp /root/work/qt/qtx/bin/uic /root/work/qt/qte_arm_26/bin QTE-ARM-26 환경설정

5. 5 ./configure -embedded ipaq -shared -depths 16 -no-cups -qt-libjpeg -qt-mouse-linuxtp -thread  License?  yes QTE-ARM-26 컴파일

6. 6  vi./src/embedded/qmouselinuxtp_qws.cpp  /dev/ts0 (rebis -2.6 touchscreen device file) QTE-ARM-26 컴파일

7. 7  vi Makefile  all: symlinks src-qmake src-moc sub-src sub-tools  make QTE-ARM-26 컴파일

8. 8  cd /root/work/qt/  source /root/work/env/qte_arm_env_26  cp qte_arm_26 /tftpboot/myrootdir_2.6/qte –rf  cd / root/work/qt/qte_arm_2.6/examples/hello  qmake -project  qmake  make  cp hello /tftpboot/myrootdir_2.6/root QTE-ARM-26 Rebis Board 를 통한 App 확인

9. 9  minicom (target board boot)  # export QTDIR=/qte  # export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$QTDIR/lib  # export QWS_MOUSE_PROTO=linuxtp:/dev/ts0  cd /root ./hello –qws  libstdc++ 관련 링크 에러시  cd /usr/local/arm/oe  cp arm-linux/lib/libstdc++.* /tftpboot/myrootdir_2.6/usr/lib/ QTE-ARM-26 Rebis Board 를 통한 App 확인

10. 10  Rebis Board Touch Screen  KERNEL Compile QTE-ARM-26 Rebis Board TouchScreen

11. 11  KERNEL option  Device Driver->Input device support -> Provide legacy /dev/psaux device (*) QTE-ARM-26 Rebis Board TouchScreen

12. 12  KERNEL option  Device Driver->Input device support -> Touchscreen interface(*) QTE-ARM-26 Rebis Board TouchScreen

13. 13  KERNEL option  Device Driver->Input device support -> Touchscreens (*) -> Samsung S3c2410 touch..(*) QTE-ARM-26 Rebis Board TouchScreen

14. 14  Kernel Compile 완료  생성된 zImage 복사  cp./arch/arm/boot/zImaeg /tftpboot/  부팅 메시지 확인 QTE-ARM-26 Rebis Board TouchScreen

15. 15  minicom (target board boot)  # export QTDIR=/qte  # export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$QTDIR/lib  # export QWS_MOUSE_PROTO=linuxtp:/dev/ts0  cd /root ./hello –qws  Touch Screen 확인  현재 Calibration 이 적용되지 않음 QTE-ARM-26 Rebis Board 를 통한 App 확인

16. 16  minicom (target board boot)  # export QTDIR=/qte  # export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$QTDIR/lib  # export QWS_MOUSE_PROTO=linuxtp:/dev/ts0  cd /root ./hello –qws  Touch Screen 확인  현재 Calibration 이 적용되지 않음 QTE-ARM-26 Rebis Board Calibration