1. Eclipse EHX – V-Series Panels Audio Mixer Features / Examples

2. WHAT IS THE V-SERIES AUDIO MIXER  The V-series panels have an internal Digital Signal Processor, (DSP).  The DSP is used to ►Route panel audio between inputs like the “from Matrix” to the outputs like “to Loudspeaker” at a variable level. ►Condition the Audio sources with band pass equalisation to reduce noises like wind or traffic rumble to make the audio more intelligible. ►Condition the Audio sources with Dynamics like compression to squeeze the microphone peaks into a less dynamic waveform thus increasing perceived loudness at the destination. ►Provide pass-through IFB for local talk over Audio or dim local speakers.

3. HX- V-SERIES AUDIO MIXER SCREENSHOT Inputs Dynamics EQ Crosspoint level controls Outputs Input levels Output levels

4. LS A V-SERIES MIXER EXAMPLE 1 Dim local Room Loudspeakers From Matrix o/p port R Loudspeakers wired through the V-Series Audio EXT1 and EXT2 connections From Matrix o/p port L Room Loudspeakers LS B Control under any keys activate DIM local IFB on EXT1 and EXT2.

5. Binaural listening (Split Ear) From Matrix Main Panel Port From Matrix Aux Panel Port Binaural (stereo) mode Co-Ax cable AES-6-CX card 2x intercom channels from Matrix to Panel over coax Panel requires 5pin XLR headset V-SERIES MIXER EXAMPLE 2

6. HS 1 from Front XLR and HS 2 from rear auxiliary connector V24LDX4 HX V-Series Panel Programming – Audio Mixer HS 1L HS 2L From Matrix Port To HS earpiece HS1 main volume control HS2 aux volume control Auxiliary audio Connector DB-25 HS mic 1 & 2 To Matrix port HS 1 / HS 2 audio mix to each headset 2x Headset users connected to 1 Panel V-SERIES MIXER EXAMPLE 3

7. Thank you!