Download presentation
Presentation is loading. Please wait.
Published byRandell White Modified over 9 years ago
2
Other Physical Systems Sect. 3.7 Recall: We’ve used the mass-spring system only as a prototype of a system with linear oscillations ! –Our results are valid (with proper re-interpretation of some of the parameters) for a large # of systems perturbed not far from equilibrium & thus which have a “restoring force” which is linear in the displacement from equilibrium. –The “Restoring Force” in a particular problem might or might not be a real physical force, depending on the system. –The math (2 nd order, linear, time dependent differential equation) is the same for such systems. Of course, the physics might be different.
3
SOME of the Mechanical Systems to which the concepts learned in our harmonic oscillator study apply : –Pendula (as we’ve seen in examples) including the torsion pendulum. –Vibrating strings & membranes –Elastic vibrations of bars & plates –Such systems have natural (resonance) frequencies & overtones. These are treated in identical manner we have done. Acoustic Systems to which the concepts learned in our harmonic oscillator study apply : –In this case, air molecules vibrate –Resonances depend on dimensions & shape of container. –Driving force: a tuning fork or vibrating string.
4
Atomic systems to which the concepts learned in our harmonic oscillator study apply : –Classical treatment as linear oscillators. –Light (high ω) falling on matter causes atoms to vibrate. When ω 0 = an atomic resonant frequency, EM energy is absorbed & atoms/molecules vibrate with large amplitude. –Quantum Mechanics: Uses linear oscillator theory to explain light absorption, dispersion, & radiation. Nuclear systems to which the concepts learned in our harmonic oscillator study apply : –Neutrons & protons vibrate in various collective motion. –Driven, damped oscillator is useful to describe this motion.
5
Electrical circuits: Major examples of non- mechanical systems for which linear oscillator concepts apply! –This case is so common, people often reverse analogies & talk about mechanical systems in terms of their “equivalent electrical circuit”. –Discussed in detail next!
6
Electrical Oscillators Sect. 3.8 in the old (4 th Edition) book! In 5 th Edition only in Examples 3.4 & 3.5 Consider a simple mechanical (harmonic) oscillator: A prototype is shown here: Equation of motion (undamped case): m(d 2 x/dt 2 ) + kx = 0 Solution: x(t) = A sin(ω 0 t - δ) Natural Frequency: (ω 0 ) 2 (k/m)
7
LC Circuit Consider a simple LC (electrical) circuit: A prototype is shown here: (L = inductor, C = capacitor) Equation of motion for charge q (no damping or resistance R): L(d 2 q/dt 2 ) + (q/C) = 0 (1) Math is identical to the undamped mechanical oscillator! A more familiar eqtn of motion (?) in terms of current: I = (dq/dt). Kirchhoff’s loop rule L(dI/dt) + (1/C)∫Idt = 0 (2) Solution to (1) or (2): q(t) = q 0 sin(ω 0 t - δ) Natural Frequency: (ω 0 ) 2 1/(LC)
8
A comparison of the equations of motion of mechanical & electrical oscillators gives analogies: x q, m L, k C -1, (dx/dt) I Consider (let δ = 0 for simplicity): q(t) = q 0 cos(ω 0 t) [q(t)] 2 = q 0 2 cos 2 (ω 0 t) and I(t) = (dq/dt) = -ω 0 q 0 sin(ω 0 t) [I(t)] 2 = [ω 0 q 0 ] 2 sin 2 (ω 0 t) = [q 0 2 /(LC)]sin 2 (ω 0 t) So: (½)L[I(t)] 2 + (½)[q(t)] 2 /C = (½)[q 0 2 /C] (1) With the above analogies, (1) is mathematically analogous to the total energy for the mechanical oscillator! We found: (½)m[v(t)] 2 + (½)k[x(t)] 2 = (½)kA 2 = E m (2) From circuit theory, total energy for an LC electrical circuit is E e (½)[q 0 2 /C] (1) is also analogous physically to (2)!
9
Physics: The total Energy of an LC circuit (½)L[I(t)] 2 + (½)[q(t)] 2 /C = (½)[q 0 2 /C] = E e = const.! Physical Interpretations: (½)LI 2 Energy stored in the inductor Analogous to kinetic energy for the mechanical oscillator (½)C -1 q 2 Energy stored in the capacitor Analogous to potential energy for mechanical oscillator (½) [q 0 2 /C] = E e Total energy in the circuit Analogous to the total mechanical energy E for the SHO Also, E e = constant! The total energy of an LC circuit is conserved. The system is conservative! (Only if there is no resistance R!). As we’ll see, in electrical oscillators, R plays the role of the damping constant b (or β) for mechanical oscillators.
10
Consider a vertical mass-spring system: ~ Similar to a free oscillator, but there is the additional constant downward force of the weight F = mg. At equilibrium, the weight stretches the spring a distance h = (mg/k) There is a new equilibrium position at x = h The eqtn of motion is the same as before with x x - h. So, it is: m(d 2 x/dt 2 ) +k(x-h) = 0 with initial conditions x(0) = h +A, v(0) = 0 Solution: x(t) = h + A cos(ω 0 t) Example 3.4 (5 th Edition)
11
Analogous electrical oscillator system to the vertical mechanical oscillator? LC circuit with a battery (a constant EMF source ε)! Equation of Motion? Kirchhoff’s loop rule gives: L(dI/dt) + (1/C) ∫ I dt = ε = [q 1 /C] q 1 Charge that must be applied to C to produce voltage ε With I = (dq/dt) this becomes: L(d 2 q/dt 2 ) + [q/C] = [q 1 /C] (1) (1) is mathematically identical to the mass-spring system with a constant external force (gravity). For initial conditions: q(0) = q 0, I(0) = 0, solution is: q(t) = q 1 + (q 0 - q 1 ) cos(ω 0 t) This circuit is an exact electrical analogue to the vertical spring-mass system in a gravitational field.
12
LRC Circuit Recall the mechanical oscillator with damping: Equation of motion: m(d 2 x/dt 2 ) + b(dx/dt) + kx = 0 We’ve seen that the general solution is: x(t) = e -βt [A 1 e αt + A 2 e -αt ] where α [β 2 - ω 0 2 ] ½ A 1, A 2 are determined by initial conditions: (x(0), v(0)). ω 0 2 (k/m), β [b/(2m)] We’ve discussed in detail the Underdamped, Overdamped, & Critically Damped cases.
13
Analogous electrical oscillator system to the damped mechanical oscillator? An LRC circuit is an electrical oscillator with damping. Equation of Motion: Kirchhoff’s loop rule: L(dI/dt)+RI + (1/C) ∫ I dt = 0 (1) In terms of charge, I = (dq/dt), (1) becomes: L(d 2 q/dt 2 ) +R(dq/dt) + (q/C) = 0 (2) (2) is identical mathematically to the damped oscillator equation of motion with x q, m L, b R, k (1/C) General Solution is clearly q(t) = e -βt [A 1 e αt + A 2 e -αt ] with α [β 2 - ω 0 2 ] ½ ω 0 2 (LC) -1, β [R/(2L)] Could discuss Underdamped, Overdamped, & Critically Damped solutions!
14
Summary of Electrical-Mechanical Analogies From the last row, clearly, the mechanical oscillator-electrical oscillator analogy also carries over to the driven mechanical oscillator driven circuit.We’ll briefly discuss this soon.
15
Mechanical Analogies to Series & Parallel Circuits We’ve just seen: –The mechanical oscillator with spring constant k is analogous to the inverse capacitance (1/C) = C -1 in an electrical oscillator. –Inversely, the mechanical compliance (1/k) = k -1 is analogous to the capacitance C Consider a circuit with 2 capacitors C 1, C 2 in parallel –From circuit theory, the effective capacitance is C eff = C 1 + C 2
16
For 2 capacitors C 1, C 2 in parallel Effective capacitance : C eff = C 1 + C 2 Consider 2 springs with constants k 1, k 2 in series –Effective spring constant (effective compliance): (1/k eff ) = (1/k 1 )+ (1/k 2 ) Proof: Apply a force F to 2 springs in series: –Spring 1 will extend a distance x 1 = (F/k 1 ) spring 2 will extend a distance x 2 = (F/k 2 ). Total extension: x = x 1 +x 2 = F[(1/k 1 )+(1/k 2 )] (F/k eff ) 2 springs in series are analogous to 2 capacitors in parallel!
17
The mechanical oscillator with spring constant k is analogous to the inverse capacitance (1/C) = C -1 in an electrical oscillator. Inversely, the mechanical compliance (1/k) = k -1 is analogous to the capacitance C Consider a circuit with 2 capacitors C 1, C 2 in series –From circuit theory, the effective capacitance is (1/C eff ) = (1/C 1 ) + (1/C 2 )
18
For 2 capacitors C 1, C 2 in series Effective capacitance: (C eff ) -1 = (C 1 ) -1 + (C 2 ) -1 Consider 2 springs with constants k 1, k 2 in parallel –Effective spring constant: k eff = k 1 + k 2 Proof: Stretch 2 springs in parallel a distance x: –Spring 1 will experience a force F 1 = k 1 x, spring 2 will experience a force F 2 = k 2 x. Total force: F = F 1 +F 2 = (k 1 +k 2 )x k eff x 2 springs in parallel are analogous to 2 capacitors in series!
19
AC Circuits AC circuits (sinusoidal driving voltage E 0 sin(ωt)) are analogous to the driven, damped oscillator. –The mathematics is identical! –Can get resonance phenomena, etc. in exactly the same way as for the mechanical oscillator. –Can carry the mechanical oscillator results over directly using x q, m L, k C -1, v = (dx/dt) I = (dq/dt) (ω 0 ) 2 = (k/m) 1/(LC), β R F 0 sin(ωt) E 0 sin(ωt) –Results in both current & voltage resonances. See Example 3.5, 5 th Edition, which does this in detail!
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.