1. DMM4020 Digital Multimeter Fact Sheet Measurements with the Push of a Button Features Featuring:  5.5 digit resolution  Basic V dc accuracy of up to 0.01%  200 mV to 1000 Vdc range with up to 10 μV resolution  200 μ A to 10 A current range with up to 1 nA resolution  200 Ω to 100 MΩ ohms range with up to 1 mΩ resolution  Dedicated dc leakage current measurement  2 x 4 ohms 4-wire measurement technique  Volts, ohms, amps and frequency measurements  Six dedicated buttons for fast access to instrument setups  Hi.Lo limit compare for Pass/Fail testing  RS-232 port on rear panel; RS-232 to USB interface adapter cable included  National Instruments LabVIEW SignalExpress™ TE, Limited Edition included  CAT I 1000 V, CAT II 600 V  3-year warranty Benefits Designed to Make Your Work Easier The DMM4020 provides volts, ohms, amps and frequency measurements in one instrument. 5.5 digit resolutionMeasure volts, ohms and amps with a basic V dc accuracy of 0.015%. Frequency measurementsSave cost and bench space by replacing a multifunction DMM and counter with one instrument. DC leakage current measurementsMake sensitive low current measurements with 1 nA resolution. Patented split terminal jacksMake 4-wire measurements with just two leads. Dual displayMeasure two different parameters of the same signal from one test connection. Limit compare modeEliminate mistakes with pass/fail indicators that clearly show if a test passes or fails. Six setup buttonsSimplify complex measurements by saving the setup to a dedicated, front- panel button. Next time, simply press the appropriate setup button. Single button for every functionReduce set up and evaluation time with dedicated front-panel buttons to access frequently used functions and parameters. PC ConnectivityEasily connect to a personal computer using RS-232 or USB; Use NI LabVIEW SignalExpress software to control your DMM, log data, and to simply transfer and document your results.

2. Key specifications and ordering information 03/10 JS/WWW 3MA-23590-1 DMM4020 Digital Multimeter Fact Sheet © 2010 Tektronix ModelsDisplayResolution (Digits) MeasurementsBasic V dc accuracy (% Reading + % Range) Pricing DMM4020 Dual; Numeric 5.5 V ac, V dc, I dc, I ac, Ω, Cont, Diode, Freq 0.015 + 0.004 Key ApplicationsBenefits  Design and debug of embedded systems  Measure volts, ohms, amps and frequency with one instrument, saving bench space.  Measure sensitive leakage current with a resolution of 1 nA, without loading the circuit under test.  Bench and Automated Test  Make common measurements by simply pressing a dedicated setup button, saving time and improving test repeatability.  Use the limit compare mode to automatically determine if a test passes or fails, making manual test processes simple, repeatable and efficient.  Education  Complete measurements and simple operation for classroom or research Standard Accessories  One Set TL710 Test Leads  Spare Fuse  Power Cord  Safety and Installation Instructions  CD Rom with User Manual  RS-232 to USB Adapter Cable  NI LabVIEW SignalExpress™ Tektronix Edition, Limited Edition Software  Statement of Calibration  Three Year Warranty Recommended Accessories, Test Leads and Probes TL710 (196-3520-xx) Premium Test Leads. TL705 2X4 Wire Ohm 1000V Test Lead. TL7252x4 Wire Ohm SMD Test Tweezers. AC4000 Soft Carrying Case. HCTEK4321 Hard Carrying Case. Opt. C3/C5 3, 5 Year Calibration Service Plan. Opt. D1 Calibration Data Report. Opt. R5 5 Year Repair Service Plan. Software SIGEXPTEProfessional Version of National Instruments LabVIEW SignalExpress™.