1. Robotics – 8

2. Plates (2-sizes) Plate with holes on 0.500" increments and 1/8" diamonds in between. Can be cut on 0.500" increments. Available in two sizes. Made from cold rolled steel, 0.046" thick, zinc plated.

3. Base Plate 30x15 (2- pack) VEX Base Plates are designed to serve as a foundation for a variety of robotics applications. (2) Base Plates included 15-holes wide x 30- holes long Made from cold rolled steel, 0.046" thick, zinc plated.

4. Angles (3-sizes) VEX angle without slots. Typically used for structural framing. Good strength on two axis. Can be cut on 0.500" increments. Made from cold rolled steel, 0.046" thick, zinc plated All items are (4) to a package.

5. Rails (3-choices) The Chassis Rails are part of the larger VEX Chassis Kits. This rail has holes on 0.500" increments and another row in-between. This part is a versatile angle with one narrow side and one taller side. Made from cold rolled steel, 0.046" thick, zinc plated. All items are (4) to a package.

6. C-Channels (3-sizes) VEX C-channel has holes on 0.500" increments. This structural member is perfect for building bigger robots. Excellent strength and twist resistance. Six sizes available. Made from cold rolled steel, 0.046" thick, zinc plated. Each channel is segmented into cuttable 2.5" pieces

7. Segmented Angle, 1x1x35 (4-pack) VEX angle without slots. Typically used for structural framing. Good strength on two axis. Can be cut on 0.500" increments. Made from cold rolled steel, 0.046" thick, zinc plated. All items are (4) to a package.

8. Slotted Angles (2-sizes) VEX angle with holes and slots identical to the standard VEX kit. Can be cut to 5, 10, 15, 20 or 25 hole lengths. A mirror "Inverted" part is available. Length is 30 holes. Made from cold rolled steel, 0.046" thick, zinc plated. All items are (4) to a package.

9. Bar 1x25 (8-pack) VEX bar with holes on 0.500" increments. Can be cut on 0.500" increments. Made from cold rolled steel, 0.046" thick, zinc plated. The item is (8) to a package.

10. Pivot Gusset (6- pack) Bracket allows parts to be connected at any angle from 0 to 90 degrees. Can also be used as a corner gusset. Made from cold rolled steel, 0.046" thick, zinc plated. Sold in packs of 6.

11. Angle Gussets (2- choices) Bent gusset for strengthening "T" joints. Slots on both main flanges allow for adjustment on two axis. Can also be used as a motor mount. Made from cold rolled steel, 0.046" thick, zinc plated. Sold in packs of 4 or 8.

12. Plus Gussets (2- choices) Generic gusset for strengthening flat joints. Can be easily cut into a "T" gusset or an "L" gusset. Made from cold rolled steel, 0.046" thick, zinc plated. Sold in packs of 4 or 8.

13. Bearing Pop Rivet (50- pack) Bearing Pop Rivets make mounting the Flats Bearing onto VEX structural component easy. Reusable; simply push the pin out from the back side. Speed up robot assembly. 50 ea of the Bearing Pop Rivets. Reusable.

14. Screws 6-32 (2- choices) 6-32 Screw with Button Head. 5/64" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Use for Motors and Servos only. High Strength Stainless Steel.

15. Screws 8-32 (11- choices) 8-32 Screw with Button Head. Standard 3/32" VEX Allen Drive. High Strength Stainless Steel. Various lengths. Standard Allen Drive VEX screw type. High Strength Stainless Steel.

16. 8-32 x 0.125" Setscrew (32-pack) These 8-32 x 0.125" setscrews fit in VEX Shaft Collars. Use them as replacements or spare parts. 8-32 thread. Use 5/64 Allen to tighten.

17. Nuts 8-32 (3-choices) A nut is a type of hardware fastener with a threaded hole. All VEX nuts are 8-32 threads. Keps Nuts have integral external tooth lock washer. Nylock nuts have internal nylon lock. Hex nuts are non- locking.

18. 4" Zip Ties (100-pack) Black Tie Wraps used to hold together and manage cables, band rubber chords, or attach to rollers or tank tread to assist an intake mechanism. Tie together cables or rubber chords. Attach to rollers or tank tread to assist an intake mechanism. Rating of 18lbs.

19. 11" Zip Ties (100- pack) Black Zip Ties used to tie larger objects like a pneumatic cylinder to metal or attach to rollers to assist an intake. Tie larger objects to metal. Attach to rollers to assist an intake. Rating of 30lbs.