1. Towards the scalability of a Service-oriented PCE architecture for IoT scenarios Vitor Barbosa C. Souza Xavi Masip Bruin Eva Marin Tordera CRAAX - Technical University of Catalonia (UPC) PACE Workshop May 2015

2. 2 Scenario IoT, Smart City, Vehicular Networks Improved capabilities of mobile devices Distinct sensors and actuators Characteristics Mobility Heterogeneity Large number of Network Elements (NE) Can we take advantage of this large number of mobile and heterogeneous NEs?

3. 3 What are the benefits? Diminish the cost of sensors deployment Community effect Distributed maintenance tasks Mobility New services New connectivity paradigm Anywhere Anyhow Anytime

4. 4 What are the difficulties? Addressing IPv4 scalability limitations Address depletion increased by the IPv4 double functionality Network layer = locator (LOC) Service layer = identifier (ID) The host-oriented model also introduces frequent communication interruptions

5. 5 What are the difficulties? Routing NEs positioning NEs availability Selection of the best devices Computation of optimal path Control overhead to handle new services Service orchestration based on network layer and service layer constraints

6. 6 State-of-the-art technologies Addressing problem: ID/LOC separation ID/LOC Split Architecture (ILSA)

7. 7 State-of-the-art technologies Routing problem Decouple control and data plane: PCE Can it address mobility? Can it enable service orchestration? Host-oriented PCE vs. Service-oriented PCE (SPCE) What are the advantages of SPCE? Service provider as a PCC PCC is not requesting just for a path PCC requests a service

8. 8 SPCE with ILSA scheme overview

9. 9 ILSA extension The PCC does not know what hosts it should connect The service is used as the main parameter for PCReq message The proposed ILSA scheme adopts different IDs for services and hosts

10. 10 Three-tier ILSA paradigm

11. 11 SPCE architecture PCC sends a service request using a extension of the PCEP to the PCEP Module (PCEPM) The request is transmitted to the Service Orchetration Module (SOM) The SOM communicates with the Device-Context Database (DCDB) to get information about the available NEs, and choose the HIDs to be used The DCDB uses information available in the ILSA scheme SOM sends the bests NEs selected to the Path Computation Module (PCM) which uses network constraints for path computation PCM communicates with ILSA to map each HID to LOC The PCM communicates with the Traffic Engineering Database (TED) to get updated NSI and compute the paths. The computed paths are sent back to the SOM SOM sends to the Decision Module (DM) a list of destinations’ HID, a set of paths to the respective LOC, and network and service layer constraints The DM selects the best combination of paths according to PCReq to the PCEPM The PCEPM sends the PCRep to the PCC

12. 12 Next steps Definition of the attributes to be stored in the DCDB and strategies for managing it Define algorithms and attributes to be used in order to map SID to HID Propose PCEP extension to support new messages and parameters.

13. Questions? Suggestions?

14. Mapping from HID to LOC is DHT-based 14 ILSA topology