1. The TEAP 2010 Assessment Report MOP-23 High Level Segment Nusa Dua, Bali, Indonesia 24 November 2011

2. TEAP 2010 Assessment 2 TEAP and its Technical Options Committees The Technology and Economic Assessment Panel (TEAP) has six Technical Options Committees Chemicals TOC Foams TOC Halons TOC Medical TOC Methyl Bromide TOC Refrigeration, AC and Heat Pumps TOC

3. 24 November 2011 TEAP 2010 Assessment 3 Annual Progress and Specific Reports Each TOC reports annually on the progress in phasing out sector production and consumption, and the impact on emissions of ODSs Each TOC reports annually on the progress in phasing out sector production and consumption, and the impact on emissions of ODSs TEAP and its TOCs respond to specific requests from the Parties TEAP and its TOCs respond to specific requests from the Parties TEAP has to establish Task Forces to deal with special requests TEAP has to establish Task Forces to deal with special requests TEAP involved in essential or critical use nominations TEAP involved in essential or critical use nominations

4. 24 November 2011 TEAP 2010 Assessment 4 TEAP Meetings and Membership TOCs have 1-2 meetings per year TOCs have 1-2 meetings per year TEAP has one week long meeting per year and also meets in the margins of the OEWG and the MOP TEAP has one week long meeting per year and also meets in the margins of the OEWG and the MOP Each TOC has a membership of 17 to 28 experts, except the MBTOC that has 38 members. Each TOC has a membership of 17 to 28 experts, except the MBTOC that has 38 members. MBTOC has 13 Article 5 members and 25 non-Article 5 members and other TOCs have 11 - 16 non-Article 5 members and 5 - 12 Article 5 members each MBTOC has 13 Article 5 members and 25 non-Article 5 members and other TOCs have 11 - 16 non-Article 5 members and 5 - 12 Article 5 members each TEAP has 20 expert members TEAP has 20 expert members In total, TEAP and TOCs have 145 expert members, of which 88 are non-Article 5 and 57 are Article 5 members In total, TEAP and TOCs have 145 expert members, of which 88 are non-Article 5 and 57 are Article 5 members

5. 24 November 2011 TEAP 2010 Assessment 5 TEAP 2010 Assessment Report Chemicals Technical Options Committee Co-chairs Biao Jiang, Ian Rae, Masaaki Yamabe

6. 24 November 2011 TEAP 2010 Assessment 6 CTOC Current Status (1) During 2007-2010, 17 process agent uses were added to Table A and 12 uses were deleted as processes were changed or abandoned. Parties may wish to consider developing an improved standard method of reporting emissions in Table B. A small number of laboratory uses of ODSs (i.e., MB, CTC and BCM) will be difficult to replace. Analytical uses of ODS, especially CTC, are declining slowly as alternative methods are adopted.

7. 24 November 2011 TEAP 2010 Assessment 7 CTOC Current Status (2) In-kind and not-in-kind alternatives have replaced 90% of solvent uses of ODSs. Remaining ODS solvent uses are mainly in Article 5 Parties. Data for feedstock quantities and emissions of CTC are incomplete. Present estimates are based on limited data plus expert judgment. A comprehensive review on CTC emissions was made but there remains a significant discrepancy between reported emissions and the observed atmospheric concentrations. During 2007 – 2010 little change in destruction technologies occurred except for cement-kiln use in one Article 5 Party.

8. CTOC The Way Forward (1) A list of Parties with approved process agent uses should be provided to the Ozone Secretariat so that requests for information could be targeted and followed up. A list of Parties with approved process agent uses should be provided to the Ozone Secretariat so that requests for information could be targeted and followed up. It would be helpful to work with national and international standards bodies to establish new standard methods of analysis that do not use ODSs. It would be helpful to work with national and international standards bodies to establish new standard methods of analysis that do not use ODSs. The reporting of ODS volumes used for feedstock uses by Parties through the Ozone Secretariat may enable a more complete quantification of feedstock uses. The reporting of ODS volumes used for feedstock uses by Parties through the Ozone Secretariat may enable a more complete quantification of feedstock uses. 24 November 2011TEAP 2010 Assessment8

9. CTOC The Way Forward (2) A hurdle to overcome in the complete phase-out of ODS solvents in Article 5 Parties will be the economic impact on small and medium size users who make up a major portion of the remaining ODS solvent market. Further studies will be needed to improve and reconcile bottom-up and top-down calculations of the CTC emissions, to search for unreported CTC emission sources, to critically analyze UNEP inventory data and possibly to revise the atmospheric lifetime of CTC. Periodic review of available destruction technologies will be necessary to provide updated technical guidelines. 24 November 2011TEAP 2010 Assessment 9

10. 24 November 2011 TEAP 2010 Assessment 10 TEAP 2010 Assessment Report Foams Technical Options Committee Co-chairs Paul Ashford, Miguel W. Quintero

11. 24 November 2011 TEAP 2010 Assessment 11 FTOC Current status (1) HCFC phase-out is complete in all non-A5 Parties, with XPS in North America being among the last to make the transition. Increasing energy efficiency requirements in appliances and buildings drive demand for more efficient thermal insulation. Hydrocarbons are currently the primary substitute, but there is pressure to further optimise this option by blending. Unsaturated HCFCs & HFCs (HFOs) are showing better thermal performance than saturated HFCs in continuing evaluations. However, substantial further validation in both performance and cost is required to support emerging commercialisation plans in the 2013 to 2015 timeframe.

12. 24 November 2011 TEAP 2010 Assessment 12 FTOC Current status (2) Concerns persist over the availability of low-GWP replacements for HCFCs in Article 5 Parties. Current options (pre-blended hydrocarbons, water blown, methyl formate, etc.) may not provide adequate solutions for SMEs. Recent building fires involving foam insulation in China have led to a review of existing codes and regulations, which likely will impact future product choices. Recovery of ODSs from appliance foams continues to be practiced but cost effectiveness in carbon equivalents will decrease as the product mix shifts to HCFC-containing foams. Further analysis of ODS banks confirms that flows of ODS- based foams from buildings will be modest for the next decade.

13. 24 November 2011 TEAP 2010 Assessment 13 FTOC The Way Forward (1) For the transition in Article 5 Parties there continues to be a need to characterise the performance of foams made from low-GWP alternatives, especially for rigid foam applications. Pilot projects for methyl formate, methylal, pre-blended hydrocarbons and supercritical CO 2 funded by the Multilateral Fund are especially important. In non-Article 5 countries, the interest is in further improving energy efficiency. An additional pressure may arise if proposals to phase-down the use of saturated HFCs are adopted. Such a measure may serve to strengthen research towards low-GWP solutions, in particular, towards the intelligent use of blends.

14. 24 November 2011 TEAP 2010 Assessment 14 FTOC The Way Forward (2) Further investigations are required to determine the most appropriate strategies for ODS bank management in foams, taking into account baseline release rates and other technical and economic factors. Focus is likely to be maintained on ensuring that CFC capture from existing appliance-based banks is optimised before those opportunities are lost. Efficient ways of transferring existing destruction technologies from non-Article 5 to Article 5 Parties are needed.

15. 24 November 2011 TEAP 2010 Assessment 15 TEAP 2010 Assessment Report Halons Technical Options Committee Co-chairs Dave Catchpole, Sergey Kopylov, Dan Verdonik

16. 24 November 2011 TEAP 2010 Assessment 16 Current Halon Status The 2010 global bank of halons is estimated as: -- Halon 1301 42,500 MT; Halon 1211 65,000 MT; Halon 2402 2,300 MT Use of Halon 2402 as a process agent by the Russian chemical industry has reduced the bank of this halon. No Party has indicated that they are unable to obtain halons to satisfy their needs, although there are cost concerns. There has been a lag in the establisment of banking and management programmes in Article 5 Parties. The International Civil Aviation Organisation adopted a revised resolution that amended halon replacement dates to those recommended by the HTOC and industry.

17. 24 November 2011 TEAP 2010 Assessment 17 HTOC The Way Forward With no global production authorised for fire protection, management of existing stocks is crucial to ensure halon availability for applications that need them. Parties may wish to encourage national or regional banking schemes to maintain good records that minimise the uncertainty in stored inventory. Parties may wish to encourage national or regional banking schemes to maintain good records that minimise the uncertainty in stored inventory. Destruction of halons for carbon credits may not provide the anticipated climate benefits. Destruction of halons for carbon credits may not provide the anticipated climate benefits. While there is no apparent shortage of recycled Halon 2402 on a global basis, there are regional shortages that Parties may wish to address. While there is no apparent shortage of recycled Halon 2402 on a global basis, there are regional shortages that Parties may wish to address.

18. 24 November 2011 TEAP 2010 Assessment 18 HTOC The Future Despite the introduction of new halon alternatives, and their adoption, there will be an ongoing need for halons. Despite the introduction of new halon alternatives, and their adoption, there will be an ongoing need for halons. The only halon alternative in a few applications will remain a high GWP HFC. The only halon alternative in a few applications will remain a high GWP HFC. Given the 25-30 year life of civil aircraft, aviation dependency on halons will continue well beyond the time when recycled halons are readily available. Given the 25-30 year life of civil aircraft, aviation dependency on halons will continue well beyond the time when recycled halons are readily available. The cost to re-engineer some legacy halon systems can be expensive and, in many cases, industry will continue to rely on halons until mandated to retrofit. The cost to re-engineer some legacy halon systems can be expensive and, in many cases, industry will continue to rely on halons until mandated to retrofit.

19. 24 November 2011 TEAP 2010 Assessment 19 TEAP 2010 Assessment Report Methyl Bromide Technical Options Committee Co-chairs Mohamed Besri, Michelle Marcotte, Marta Pizano, Ian Porter

20. 24 November 2011 TEAP 2010 Assessment 20 Global controlled uses of MB have been reduced by over 90% from the baseline. Since 2003, nine non-Article 5 Parties have applied for Critical Use Exemptions. From the initial 106 applications for 18,700 t in 2003, CUNs have decreased to 19 applications for approximately 690 t for the year 2013. Article 5 Parties have reduced consumption by approximately 75% of baseline -- well ahead of phase-out schedules. Further efforts are necessary to meet the full phase-out deadline of 2015. MBTOC has identified feasible alternatives for over 95% of controlled uses. Progress in MB phase-out for controlled uses

21. 24 November 2011 TEAP 2010 Assessment 21 The phase-out for the remaining MB uses will be influenced greatly by the registration and the regulatory controls on several key chemical alternatives: in pre-plant -- 1,3-D, chloropicrin, methyl iodide in postharvest -- sulfuryl fluoride For remaining soils uses, studies with alternatives are needed to measure pathogen thresholds and risks of disease. Modification of regulations is also needed to allow adoption of alternatives to MB. Parties may wish to review reasons for listing certain soils uses as QPS. MBTOC Remaining challenges

22. 24 November 2011 TEAP 2010 Assessment 22 Use of MB for production of strawberry fruit is the largest remaining use (82%) due to regulations affecting all chemical alternatives. Chemical alternatives (1,3-D/Pic, Pic alone, metham sodium) have been widely adopted in many sectors. Recent registration of methyl iodide in the USA (now including California) has significantly reduced amounts of MB requested in CUNs. Non-chemical alternatives - grafting, substrates, biofumigation, solarisation, steam and combinations with chemicals are also widely adopted. The more difficult remaining sectors for soils uses include strawberry nurseries, ornamentals and other nursery plant material. Some uses, including nursery uses, previously considered under the CUN process have been reclassified as QPS. Alternatives to MB for soils uses

23. 24 November 2011 TEAP 2010 Assessment 23 Flour and cereal mills are the largest post harvest MB use. Alternatives include IPM programs, many with fumigants. Heat treatments – alone or with fumigation and combinations - are also effective. Sulfuryl Fluoride (SF) is a key fumigant alternative to MB. Several non-QPS postharvest commodities are still MB-treated: dried fruits, nuts, rice, dates. Adopted alternatives for commodities include carbonyl sulphide, ethyl formate, methyl iodide, modified atmospheres, phosphine and SF. Controlled atmosphere has emerged with widespread commercial adoption. Suitable for the widest range of food and non-food commodities. Compatible with organic certification. Two concerns: pest resistance to chemical fumigants and psocids emerging as postharvest pests. Alternatives to MB for Structures and Commodities

24. 24 November 2011 TEAP 2010 Assessment 24 Methyl Bromide consumption for QPS In 2008, MB use was higher for QPS than for controlled uses for the first time. In 2010, QPS consumption was 51% higher. In 2008, MB use was higher for QPS than for controlled uses for the first time. In 2010, QPS consumption was 51% higher. Increased use of MB for QPS is offsetting the gains made by reductions in controlled uses. Increased use of MB for QPS is offsetting the gains made by reductions in controlled uses. There is no obligation or incentive under the Protocol to limit QPS uses or emissions, however, some Parties phased out MB for QPS, others are committed to a phase-out in the near future. There is no obligation or incentive under the Protocol to limit QPS uses or emissions, however, some Parties phased out MB for QPS, others are committed to a phase-out in the near future. 20-35% of present global QPS use can be replaced with alternatives available today. 20-35% of present global QPS use can be replaced with alternatives available today. Parties may wish to give increased consideration to adoption of alternatives for the major QPS uses (timber, WPM, grain, logs). Parties may wish to give increased consideration to adoption of alternatives for the major QPS uses (timber, WPM, grain, logs). Improved knowledge on remaining MB uses for QPS will help guide a successful phase-out. Improved knowledge on remaining MB uses for QPS will help guide a successful phase-out.

25. 24 November 2011 TEAP 2010 Assessment 25 TEAP 2010 Assessment Report Refrigeration AC and Heat Pumps Technical Options Committee Co-chairs Lambert Kuijpers, Roberto de A. Peixoto

26. 24 November 2011 TEAP 2010 Assessment 26 RTOC Current status (1) More than 60 new refrigerants, many of them blends, have been introduced for use since the 2006 Assessment Report. Domestic refrigeration: More than one-third of newly produced units globally use HC-600a; the balance use HFC- 134a. Commercial refrigeration: Hydrocarbons (HCs) and R-744 (CO 2 ) are gaining market share for stand-alone equipment in Europe and in Japan. HCFC-22 represents about 60% of the global commercial refrigerant bank. In non-Article 5 Parties, the replacement of HCFC-22 in supermarkets is dominated by R-404A and R-507A, with an increasing use of R-744.

27. 24 November 2011 TEAP 2010 Assessment 27 RTOC Current status (2) Industrial refrigeration: R-717 (ammonia) and HCFC-22 are the most common refrigerants. R-744 is gaining in low- temperature, cascade systems where it primarily replaces R-717. Transport refrigeration: virtually all new systems utilise HFC refrigerants (R-404A and HFC-134a). Air-to-air conditioners and heat pumps: R-410A and to a limited degree R-407C, are still the major near-term replacements for HCFC-22. HFC-32 has been selected in some recent MLF projects. HC-290 is being used in low charge split systems, window and portable air conditioners.

28. 24 November 2011 TEAP 2010 Assessment 28 RTOC Current status (3) Water-heating heat pumps: HCFC-22 is currently used in Article 5 Parties, while HFC blends are used elsewhere. R-744 heat pumps have shown steady growth. Chillers: HFC-134a and R-410A are the most common options in smaller systems. The use of HCs and R-717 forms a small fraction. Vehicle air conditioning: several HFC-134a replacement options for new cars (and light trucks) have been evaluated: R-744, HFC-152a and HFC-1234yf. The first vehicles using HFC-1234yf will be introduced in 2012.

29. 24 November 2011 TEAP 2010 Assessment 29 RTOC The way forward (1) Many of the lower GWP refrigerants are flammable, which increases the need to reduce refrigerant charge and to implement risk-mitigation technologies. There is a new emphasis on optimising system efficiency and reducing emissions of high-GWP refrigerants. A high degree of containment applies to all future refrigerant applications (for flammability and toxicity risk reduction, reliability, energy efficiency, and to reduce emissions).

30. 24 November 2011 TEAP 2010 Assessment 30 RTOC The way forward (2) Manufacturing of refrigeration, air-conditioning, and heat pump equipment by Article 5 Parties for export is expected to increase further. In domestic refrigeration, and to a lesser extent in commercial stand-alone equipment, the trend will be a transition from HFC-134a to HC-600a. For two-temperature supermarket systems, R-744 is an option for the lower temperature level. In the near future, the choices for the medium-temperature level will include new low GWP HFCs, R-744 and HCs.

31. 24 November 2011 TEAP 2010 Assessment 31 RTOC The way forward (3) In air-to-air air conditioning and heat pumps, lower-GWP HFCs, HFC blends and HC-290 are the most likely near- term refrigerants to replace HCFC-22. The front running candidate among global car manufacturers for future vehicle air conditioning systems is HFC-1234yf. In contrast to non-Article 5 Parties, the demand for service refrigerants in most Article 5 Parties will consist of HCFC- 22 and HFC-based service blends.

32. 24 November 2011 TEAP 2010 Assessment 32 TEAP 2010 Assessment Report Medical Technical Options Committee Co-chairs Jose Pons, Helen Tope, Ashley Woodcock

33. 24 November 2011 TEAP 2010 Assessment 33 Metered Dose Inhalers Technically satisfactory alternatives to CFC MDIs are available in almost all countries, for all key drug classes, for asthma/COPD. Most countries are expected to complete transition by about end of 2012, except China, which plans to phase out in 2016. A cautious approach to CFC production for MDIs is advisable since transition is moving quickly. With China supplying Russia’s and its own CFCs, the rest of the world could complete the CFC MDI phase-out with careful management of existing CFC stockpiles.

34. 24 November 2011 TEAP 2010 Assessment 34 Other pharmaceutical aerosols and sterilization Technically and economically feasible alternatives are available for medical aerosol products other than MDIs. Small use of CFCs remains in developing countries, presumably from stockpiles. Commercially available alternatives are replacing the use of CFCs and HCFCs in sterilization. Non-A5 and most A5 Parties have successfully phased out CFC consumption in sterilization. An orderly phase-out of HCFCs in sterilization is readily achievable to meet Montreal Protocol HCFC phase-out schedules.

35. 24 November 2011 TEAP 2010 Assessment 35 Some key messages from the 2010 report.....

36. 24 November 2011 TEAP 2010 Assessment 36 Montreal Protocol The Montreal Protocol is working, with progress in every sector and many ODS applications phased out world-wide. It is technically and economically feasible: to accelerate the phase-out of most ODS; to reduce emissions in many applications; to collect and destroy surplus ODS; to phase down the use of high GWP HFCs in mobile air conditioning where ODS have already been phased out.

37. 24 November 2011 TEAP 2010 Assessment 37 Technology not yet available for replacement of some ODS uses Some metered-dose inhalers (MDIs) and laboratory and analytical uses still depend on new production of ODSs under essential use exemptions. Some metered-dose inhalers (MDIs) and laboratory and analytical uses still depend on new production of ODSs under essential use exemptions. Some fire protection applications depend on banked halons; refrigeration and air conditioning servicing depends on banked CFCs, and banked and new production HCFCs; and some minor uses depend on a variety of ODSs. Some fire protection applications depend on banked halons; refrigeration and air conditioning servicing depends on banked CFCs, and banked and new production HCFCs; and some minor uses depend on a variety of ODSs.

38. 24 November 2011 TEAP 2010 Assessment 38 Methyl bromide opportunities There is no obligation or incentive under the Montreal Protocol to limit methyl bromide quarantine and pre- shipment (QPS) uses or emissions. There is no obligation or incentive under the Montreal Protocol to limit methyl bromide quarantine and pre- shipment (QPS) uses or emissions. Nevertheless, some Parties have entirely phased out QPS uses of MB and others are committed to phase-out in the near future. Nevertheless, some Parties have entirely phased out QPS uses of MB and others are committed to phase-out in the near future. 20-35% of present global use can be replaced with alternatives available today. 20-35% of present global use can be replaced with alternatives available today. Adoption of technologies in Article 5 countries for remaining soil and commoidity uses before 2015 will help guide successful phase-out of remaining uses. Adoption of technologies in Article 5 countries for remaining soil and commoidity uses before 2015 will help guide successful phase-out of remaining uses.

39. 24 November 2011 TEAP 2010 Assessment 39 Leapfrog technology is available in some applications Technology is available for Article 5 Parties to leapfrog HFCs in some applications, which would avoid a second transition out of HFCs and complications of an inventory of HFC equipment requiring servicing. The same technology is available for non-Article 5 Parties to make the transition away from high-GWP HFCs in a new transition.

40. 24 November 2011 TEAP 2010 Assessment 40 Banked ODS are leaking away The opportunity to destroy unwanted ODS refrigerants is leaking away as equipment reaches end-of-life and ODS are discharged. The co-benefits of ozone and climate protection from collecting and destroying ODS likely exceed the costs. ♦ Not profitable without payment for environmental benefit ♦ More profitable if enterprises were paid for the contribution to climate and ozone protection ♦ Economic incentives and infrastructure are not available in most developing and developed countries It is counter-productive to compel collection & destruction without incentives, because owners may discharge ODS that would otherwise be available for paid destruction.

41. 24 November 2011 TEAP 2010 Assessment 41 Thank you !