1. Crossing firewalls Liane Tarouco Leandro Bertholdo RNP POP/RS

2. Firewalls block H.323 ports

3. H.323 ports

4. Security issues n For the H.323 protocol to cross a firewall, the specific static ports and all ports within the dynamic range must be opened for all traffic. n This clearly causes a security issue that could render a firewall ineffective.

5. Firewall and Proxy Server n A firewall is a set of security mechanisms that an organisation implements to prevent unsecured access from the outside world to its internal network. n Firewalls usually work by blocking access of certain network protocols to specific ports. n The firewall can also control what Internet resources the organisations users may access. n Firewalls usually include or work in conjunction with a Proxy Server.

6. Proxy n A Proxy Server acts as an intermediary server that makes network requests on behalf of internal users, so that organisations can ensure security, control and caching services. n Proxy Servers are now equipping themselves with security features such as Network Address Translation (NAT). n The NAT or Proxy Server works on the concept that there is an outside world (Internet) and an inside world (intranet) and it separates and protects the intranet from the Internet. n VCON's SecureConnect family includes a Firewall Proxy specifically designed to allow Video Conferencing sessions through an existing firewall.

7. NAT n The latest releases of Sony's, Polycom's and VCON's software all support NAT and allow you to specify the external IP address of the selected endpoint.

8. TCP & UDP use n Reliable transport is required for control signals and data because they must be received in the proper order and cannot be lost. n Consequently, TCP is used with the H.245 control channel, the T.120 data channel and Call control. n Unreliable UDP is used for audio and video streams were time sensitive issues become a priority.

9. H.323 and Intelligent Firewalls: n Q.931 is the Call Signalling protocol used in setting-up and terminating a call. H.323 uses TCP on port 1720 for Q.931 and negotiates which dynamic port range to use between the endpoints for H.245 Call Parameters, data, audio and video. n Clearly, to open all ports within the dynamic range would cause security issues, so the firewall must be able to allow H.323 related traffic through on an intelligent basis.

10. Intelligent Firewalls n The firewall can do this by snooping on the control channel to determine which dynamic ports are being used and then only allowing these ports to pass traffic when the control channel is busy.

11. Firewall n The latest releases of Sony's, Polycom's and VCON's endpoint software all allow you to specify the dynamic port ranges to be used by TCP and UDP. n This allows you to reduce the number of ports that need to be open, and hence the security risk. n Furthermore, these latest versions support 'Port Pinholing', so that inbound data can be returned using the same port as the initiating outbound call.

12. Using Proxy Server to Enhance Security: n When H.323 terminals communicate directly with each other, they must have direct access to each others IP address. n This exposes key network information to a potential attacker. n By using a Proxy Server, only limited number of addresses are exposed, keeping the majority of address information hidden.

13. Using Proxy Server n Conferencing successfully through a firewall depends upon how well the firewall is capable of dealing with the complexities of the H.323 protocol. n If the firewall cannot provide dynamic access control based on looking at the control channel status, then a Proxy Server inside the firewall can be used to provide access control. n Since only the Gatekeeper, via RAS on port 1719 and the Proxy via Call Setup on port 1720 are the only devices that interact with H.323 device outside the firewall, access control lists on the firewall can be set to pass traffic destined for the Gatekeeper or Proxy direct to them.

14. VCON's SecureConnect n VCON's SecureConnect family includes an ALG Proxy Server specifically designed to allow Video Conferencing sessions through an existing firewall. It works in conjunction with MXM, which provides Gatekeeper functionality to the registered endpoints. n The ALG Proxy Server setup overcomes the connectivity problems that are presented by firewalls and NAT servers. n To accomplish this, the ALG Proxy Servers require that the firewall has pinholes opened outbound to the public network through 4 specific ports. n No ports need opening inbound and traffic through the pinholes is only between ALG units.

15. Using Encryption or VPN: n VCON's Advanced Encryption Server works in conjunction with their PC-based Encryption Client and/or the ALG Proxy Server in order to fully encrypt video conferences or other data transmissions across public or private networks.

16. Using Encryption or VPN: n The Encryption Client acts as a virtual network card within the PC and exchanges keys using SSL with the Advanced Encryption Server via port 443. n The Advanced Encryption Server allocates a virtual address to each Client. n A conference is then established between Clients by creating a specific VPN through the Firewall and using the virtual addresses. n The Firewall must support VPN pass-through and have a port open for this purpose; typically port 2061.