1. Implementing Wi-Fi Ross Goodrum Mary Herbert David Nguyen

2. THE STEPS Performing Site SurveyInstalling the ClientSetting up the NetworksExtending the NetworkVerify Installation

3. Performing Site Survey Pre-Existing Wireless Devices Radio bands used Avoid overlapping Networks Interference Sources Document or sketch-out site survey Identify deadspots

4. Refrigerators Reinforced walls Metal plumbing Microwaves

5. Installing the Client Install NIC Attach antenna Install any necessary drivers and software PCI NIC First, install drivers and software Connect NIC to computer USB NIC

6. Setting Up Ad Hoc Network SSID IP addresses ChannelSharing

7. Setting up an Infrastructure Network -Omnidirectional and Centered -Dipole Antennas -Reasons not used -Signal bleed -Security -Glaring dead spots Placing the Access Point -Gaining Gain -Decibals (dB) -Bigger Antenna -Focusing the Wave -Directional Antenna

8. Setting up an Infrastructure Network Browser-based setup utility 192.168.1.1 Configuring the Access Point

9. Setting up an Infrastructure Network Unique Configuring the SSID (ESSID) and Beacon

10. Setting up an Infrastructure Network Configuring MAC Address Filtering

11. Setting up an Infrastructure Network Set up at WAP Generate Unique Key Select Encryption Level Configuring Encryption

12. Setting up an Infrastructure Network Overlapping Signals Dual Band 802.11n Configuring Channel/Frequency

13. Setting up an Infrastructure Network Configuring the Client Broadcasting Non- Broadcasting

14. Extending the Network

15. Point-to-PointPoint-to-Multipoint

16. Next…TEST IT!!!!