1. Gas Turbine in power generation control.

2. What does the project do? Provide a transfer function between the speed and the fuel. Provide a transfer function between the speed and the load Obtaining the best PID control for the system.

3. Development of project System fuel and speed data Speed to fuel transfer function Using LMS DSP toolbox System load and speed data Speed to load transfer function Using Curve fitting toolbox + - Net speed Input fuel Desired load Development of transfer function and open loop system.

4. Development with PID controller Speed to fuel transfer function Speed to load transfer function PID controller Desired load - + Net Speed Speed to Fuel mapping Desired speed + - PID constants Change with load

5. Changing of PID constants The PID constants will change in order to ensure the best response is obtained. Best response here would mean no overshoot and a very short response time This is achieved by using the least square method.

6. Comparison between constant and changing PID constants