Download presentation
Presentation is loading. Please wait.
Published byCecilia Nicholson Modified over 9 years ago
1
By: Abenet Addisu
2
Author Affiliations The Department of Civil and Environmental Engineering The Penn State Hydrogen Energy Center The Pennsylvania State University Ramanathan Ramnarayanan Shaoan Cheng Study Supported By: National Science Foundation
3
What does a Microbial Fuel Cell look like?
4
Study Objective Is a PEM necessary in microbial fuel cells? Increase power density to levels never achieved by a aqueous cathode systems.
5
Rationale The making of a more economically friendly Microbial Fuel Cell. While increasing it’s power density levels.
6
Methods Type of Design for Air-Cathode with PEM Consists of… ○ Anode and cathode placed on opposite sides in a Plexiglas ○ PEM cathode bonded the PEM directly onto a flexible carbon-cloth electrode. Hot-pressed onto cathode. Type of Design for Air- Cathode without PEM Same structure except without PEM.
7
Methods
8
Experimental Conditions Wastewater was gathered from the Pennsylvania State University Wastewater Treatment Plant. Wastewater was put into the anode for bacteria to colonize. ○ 1200 mg/L of glucose was added to the wastewater for some trials.
9
Methods Tests Used Voltage was measured with multimeter then converted to power density (P=IV/A). Oxygen across the cathode was calculated by measuring the dissolved oxygen in the anode chamber over time. ○ Using a nonconsumptive fiber optic oxygen probe.
10
Results Microbial Fuel Cell With PEM Microbial Fuel Cell Without PEM
11
Sources of Errors No precautions were taken to maintain anaerobic conditions during liquid replacement. Heating the PEM and cathode to bond them together causing… Carboxylation Degeneration of the catalyst of the cathode.
12
Author’s Conclusion Main disadvantage of not having a PEM Potential for the loss of substrate due to aerobic oxidation by bacteria in the anode chamber. The PEM can be eliminated while increasing power generation.
13
Study Conclusion You can make a Microbial Fuel Cell without an PEM. Several types of organic material can be used including wastewater. Relation To My Project A high-tech version of my project. Variety of different substances in the anode.
14
Critique Somewhat confusing A lot of measurements and abbreviations. Lines on graphs were bunched together forming a unreadable blob. If you’re not familiar with it’s vocabulary, it’s impossible to decipher.
15
By: Abenet Addisu
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.