1. PC Maintenance: Preparing for A+ Certification Chapter 22: Setting Up a Windows Network

2. Chapter 22 Objectives Install network components Install network components Set up networking in Windows Set up networking in Windows Understand TCP/IP basics Understand TCP/IP basics

3. Installing a NIC Physical installation Physical installation PCI or ISA card PCI or ISA card PC Card (PCMCIA) PC Card (PCMCIA) USB USB Setup in Windows Setup in Windows Run Setup utility to install driver Run Setup utility to install driver Configure any options as needed Configure any options as needed Test to confirm functionality Test to confirm functionality

4. Installing a Hub, Switch, or AP Connect network cables Connect network cables Connect AC power to device Connect AC power to device Start up PC(s) and test network connectivity Start up PC(s) and test network connectivity

5. Networking Software and the OSI Model

6. Version Differences in Windows Networking Windows 95, 98, Me Windows 95, 98, Me Single set of properties for all networking as a whole Single set of properties for all networking as a whole Windows 2000, XP Windows 2000, XP Each network connection has its own properties Each network connection has its own properties Each network connection can have different protocols and services Each network connection can have different protocols and services

7. Windows 9x Networking From Control Panel, choose Network From Control Panel, choose Network Add protocols and services Add protocols and services Configure TCP/IP for IP address Configure TCP/IP for IP address

8. Windows 2000/XP Networking Choose a network connection and then view its Properties Choose a network connection and then view its Properties

9. Network Client Software Client for Microsoft Networks Client for Microsoft Networks Might already be installed Might already be installed Installed during Windows Setup if a NIC is detected Installed during Windows Setup if a NIC is detected Installed when you run Network Setup Wizard Installed when you run Network Setup Wizard Client for Netware Networks Client for Netware Networks Must be manually installed Must be manually installed Not available in all versions Not available in all versions

10. Manually Installing Network Client Software Windows 9x/Me Windows 9x/Me Add client from Networks dialog box Add client from Networks dialog box Windows 2000/XP Windows 2000/XP Choose a network connection and add client for that connection Choose a network connection and add client for that connection

11. Protocols TCP/IP TCP/IP Usually installed by default Usually installed by default Required for Internet Required for Internet Used by most networks Used by most networks NetBEUI NetBEUI Older, compact protocol Older, compact protocol Not routable Not routable Not available in Windows XP Not available in Windows XP IPX/SPX-Compatible Internetwork Packet Exchange/Sequenced Packet Exchange Required for Client for Netware Networks

12. Binding Protocols Required in Windows 9x/Me because of the single set of Network settings Required in Windows 9x/Me because of the single set of Network settings Associates a protocol with a client or NIC Associates a protocol with a client or NIC

13. Binding Protocols

14. Checking for Network Connectivity Browse My Network Places (or Network Neighborhood) Browse My Network Places (or Network Neighborhood)

15. Changing the Computer Name and Workgroup Name Windows 9x/Me: Identification tab in Network properties Windows 9x/Me: Identification tab in Network properties

16. Changing the Computer Name and Workgroup Name In System Properties: In System Properties: Windows 2000: Network Identification tab Windows 2000: Network Identification tab Windows XP: Computer Name tab in System properties Windows XP: Computer Name tab in System properties

17. Network Setup with Wizards Windows Me: Windows Me: Home Networking Wizard Home Networking Wizard Windows XP: Windows XP: Network Setup Wizard Network Setup Wizard

18. Understanding TCP/IP IP Addresses IP Addresses 32-bit binary number 32-bit binary number Broken down into four 8-digit binary numbers Broken down into four 8-digit binary numbers Each binary number converted to decimal Each binary number converted to decimal Example: 1100111.10010110.11000000.00001100 (equivalent to 207.150.192.12) Example: 1100111.10010110.11000000.00001100 (equivalent to 207.150.192.12)

19. Assigning IP Addresses Static: Fixed address, assigned to each PC Static: Fixed address, assigned to each PC Dynamic: Address assigned to the PC by a DHCP server Dynamic: Address assigned to the PC by a DHCP server Automatic Private IP Address (APIPA): Address assigned by default if DHCP server is not available Automatic Private IP Address (APIPA): Address assigned by default if DHCP server is not available

20. Subnet Masks Tells where the network address divides from the host address Tells where the network address divides from the host address Binary versions always have the 1s first, followed by the 0s Binary versions always have the 1s first, followed by the 0s Example, 11111111.11111111.11111111.00000000 Example, 11111111.11111111.11111111.00000000 When converted to decimal: 255.255.255.0 When converted to decimal: 255.255.255.0

21. DNS Server Stands for Domain Name System Stands for Domain Name System Translates between URLs and IP addresses on the Internet Translates between URLs and IP addresses on the Internet Many DNS servers on the Internet, all sharing data with one another Many DNS servers on the Internet, all sharing data with one another

22. Checking PC’s IP Address Windows 9x/Me: Windows 9x/Me: 1. View Network properties 2. View properties for TCP/IP 3. Look on IP Address tab

23. Checking PC’s IP Address Windows 2000 or XP: Windows 2000 or XP: 1. Display properties for desired connection 2. Display properties for TCP/IP