1. S800H Hybrid Operator

2. Summary  S700H bug fixing  New S800H  Lever manual release  Hydraulic manual release

3. BUG FIXING REPORT: Encoder disc – broken teeth SOLUTION: New encoder disc

4. REPORT: Water seepage inside the encoder housing SOLUTION: New Encoder RESIN protected BUG FIXING

5. SOLUTION: POSITIVE STOP has been modified REPORT: POSITIVE STOP fall out of their seat BUG FIXING

6. REPORT: Pin fall out from fixing gracket and screews get lose SOLUTION: Fixing bracket is modified, blind holes BUG FIXING

7. REPORT: motor fixing bracket brackes SOLUTION: Motor with integrated flange BUG FIXING

8. REPORT: Oil leakage by the feeding pipe SOLUTION: New, longer, pipe BUG FIXING

9. SOLUTION: New Hydraulic Release SEGNALAZIONE: little set-up margin if the box is not properly in position BUG FIXING

10. Summary  S700H bug fixing  New S800H  Lever manual release  Hydraulic manual release

11. NEW S800H The new S800H integrates all modifications applied in time to the previous S700H It can be easily recognised by the handles and electric motor cover in red colour

12. Summary  S700H bug fixing  New S800H  Lever manual release  Hydraulic manual release

13. LEVER MANUAL RELEASE REPORT: Fixing screws get lose and brake SOLUTION: Screws changed from M5x20 to M6x20

14. Summary  S700H bug fixing  New S800H  Lever manual release  Hydraulic manual release

15. SELLING POINTS 1 Ease of installation 2 Ease of use 3 Retro-fit HYDRAULIC MANUAL RELEASE

16. 1 Ease of installation The release is directly fixed to the foundation box and connected to the operator through two flexible pipes. The release is COMPLETELY independent from the leaf and therefore phase between splined coupling and operator

17. 2 Ease of use The release (body totally aluminium made) is physically out of the foundation box, this makes it possible to operate it from inside or outside of the property. The key release (metal key as standard) is protected by a rubber cover

18. 3 Retro-fit The height dimensions of the New Hydraulic Release and of the New Splined Collar allow the installation (as replacement) on sites in which is actually present the Lever Manual Release. It’s sufficient to use the drilling template provided into the packaging, drill the holes on the foundation box, remove lever release and fix the New Hydraulic Release. At present, all foundation boxes in our stocks already have the fixing holes.

19. 4 Dimensions The installation of CBAC operators commonly requires a manual release device. Lever release or Hydraulic Release have the height from the floor level. LEVER RELEASEHYDRAULIC RELEASE

20. 4 Dimensions The installation of SB operators commonly requires only the splined collar. Two splined collars are available: -short: to have the leaf closer to the floor level -High: to have more space between leaf and floor level (this is the same collar needed to install the New Hydraulic Release). SHORTHIGH

21. Summary  S700H bug fixing  New S800H  Lever manual release  Hydraulic manual release  Part Numbers and release devices configuration

22. 1 Part Numbers and configurations Manual Release device for S800H CBAC operators: lever manual release (P/N 390878) or Hydraulic release NEW (P/N 390035) + splined collar NEW (cod.390972) The SB operators do not require any release device, but only a splined collar to withstand the leaf: short splined collar (P/N 390887) or High splined collar NEW (P/N 390972)

23. Product Availability June 2011 (waiting BETA –TEST feed-backs)