1. Skilled Trades / Res. Cons’t. Compressor & Attachments Mr. Mark Shortall / Technology Department

2. Compressor / Attachments

3. We have two compressors here in our Skilled Trades Facility with several attachments. We have two compressors here in our Skilled Trades Facility with several attachments. Depending on your various modules you may use some or all of these attachments. Depending on your various modules you may use some or all of these attachments.

4. Brad Nailer / Stapler

5. Coiled Roofing Nailer

6. Framing Nailer

7. Palm Nailer

8. Flooring Nailer

9. Impact Wrench / Rachet

10. Safety

11. Safety Always obtain teachers permission prior to using the compressor and or attachments. Always obtain teachers permission prior to using the compressor and or attachments. Always use safety glasses to prevent eye injuries. The person operating the compressor must ensure all people in the shop are wearing his/her glasses. Always use safety glasses to prevent eye injuries. The person operating the compressor must ensure all people in the shop are wearing his/her glasses. Direct Air Exhaust away from operator. Direct Air Exhaust away from operator.

12. Safety Always assume the tool contains fasteners. Keep tool pointed away from yourself and others….. NO HORSEPLAY!! Always assume the tool contains fasteners. Keep tool pointed away from yourself and others….. NO HORSEPLAY!! Do not load fasteners with trigger depressed. This will prevent unintentional firing of a fastener. Do not load fasteners with trigger depressed. This will prevent unintentional firing of a fastener. Load fasteners with tool disconnected from air supply Load fasteners with tool disconnected from air supply

13. Safety Connect attachment (nailer, impact wrench…) to air supply hose with a coupling that removes all pressure from the tool when the coupling is disconnected. Tool driving mechanism may cycle when tool is first connected to air supply. Connect attachment (nailer, impact wrench…) to air supply hose with a coupling that removes all pressure from the tool when the coupling is disconnected. Tool driving mechanism may cycle when tool is first connected to air supply. Remove finger from trigger when not driving fasteners. Never carry a tool with finger on trigger… tool may fire if bumped while trigger is depressed. Remove finger from trigger when not driving fasteners. Never carry a tool with finger on trigger… tool may fire if bumped while trigger is depressed.

14. Safety Fire fastener into work surface only. Never into materials that are too hard to penetrate. Fire fastener into work surface only. Never into materials that are too hard to penetrate. Do not fire fasteners too close to the edge of a workpiece. This could cause the piece to split and the fastener could fly free or ricochet causing an injury. Do not fire fasteners too close to the edge of a workpiece. This could cause the piece to split and the fastener could fly free or ricochet causing an injury. Do not drive a fastener on top of another fastener or fire on too steep of an angle. Do not drive a fastener on top of another fastener or fire on too steep of an angle.

15. Safety Do not set firing mechanism to “Contact Actuation Mode”. Do not set firing mechanism to “Contact Actuation Mode”.

16. Safety Be aware of direction of travel of each fastener. Be sure not to place hand in line with pathway of fastener. Be aware of direction of travel of each fastener. Be sure not to place hand in line with pathway of fastener.

17. Safety: Don’t Be A Dummy!

18. Safety Test Its best to load fasteners in the pneumatic nailer with the trigger depressed ……………………………. TF Its best to load fasteners in the pneumatic nailer with the trigger depressed ……………………………. TF It is best to load the pneumatic nailer with the air supply connected ……………………………………………. TF It is best to load the pneumatic nailer with the air supply connected ……………………………………………. TF It is best to load the pneumatic nailer with the air supply disconnected ……………………………………….. TF It is best to load the pneumatic nailer with the air supply disconnected ……………………………………….. TF To ensure the fastener is deep enough it’s a good idea to drive one on top of another one ………… TF To ensure the fastener is deep enough it’s a good idea to drive one on top of another one ………… TF Tool driving mechanism may cycle when tool is first connected to air supply ………………………… TF Tool driving mechanism may cycle when tool is first connected to air supply ………………………… TF

19. Safety Test Always assume tool contains fasteners ……….. TF Always assume tool contains fasteners ……….. TF Do not fire fastener too close to the edge of a piece of stock ……………………………………………………….. TF Do not fire fastener too close to the edge of a piece of stock ……………………………………………………….. TF Connect tool to the air supply hose with a coupling that removes all pressure from the tool upon disconnect ………………………………………………………………… TF Connect tool to the air supply hose with a coupling that removes all pressure from the tool upon disconnect ………………………………………………………………… TF Only the operator of the compressor needs to wear safety glasses …………………………………………… TF Only the operator of the compressor needs to wear safety glasses …………………………………………… TF Always obtains teacher permission prior to using the air compressor ………………………………………………. TF Always obtains teacher permission prior to using the air compressor ………………………………………………. TF

20. Safety Test Its best to load fasteners in the pneumatic nailer with the trigger depressed ……………………………. TF Its best to load fasteners in the pneumatic nailer with the trigger depressed ……………………………. TF It is best to load the pneumatic nailer with the air supply connected ……………………………………………. TF It is best to load the pneumatic nailer with the air supply connected ……………………………………………. TF It is best to load the pneumatic nailer with the air supply disconnected ……………………………………….. TF It is best to load the pneumatic nailer with the air supply disconnected ……………………………………….. TF To ensure the fastener is deep enough it’s a good idea to drive one on top of another one ………… TF To ensure the fastener is deep enough it’s a good idea to drive one on top of another one ………… TF Tool driving mechanism may cycle when tool is first connected to air supply ………………………… TF Tool driving mechanism may cycle when tool is first connected to air supply ………………………… TF

21. Safety Test Always assume tool contains fasteners ……….. TF Always assume tool contains fasteners ……….. TF Do not fire fastener too close to the edge of a piece of stock ……………………………………………………….. TF Do not fire fastener too close to the edge of a piece of stock ……………………………………………………….. TF Connect tool to the air supply hose with a coupling that removes all pressure from the tool upon disconnect ………………………………………………………………… TF Connect tool to the air supply hose with a coupling that removes all pressure from the tool upon disconnect ………………………………………………………………… TF Only the operator of the compressor needs to wear safety glasses …………………………………………… TF Only the operator of the compressor needs to wear safety glasses …………………………………………… TF Always obtains teacher permission prior to using the air compressor ………………………………………………. TF Always obtains teacher permission prior to using the air compressor ………………………………………………. TF

22. Compressor / Attachments

23. Skilled Trades / Res. Cons’t. Compressor & Attachments Mr. Mark Shortall / Technology Department