1. Rev 3.091 LABORATORY PRACTICAL

2. Rev 3.092 SECTIONS 1. PERFORMING EVIDENTIAL BREATH ALCOHOL TEST 2. ERROR MESSAGES 3. FUNCTION KEYS 4. RESET SWITCH

3. Rev 3.093 SECTION I: PERFORMING EVIDENTIAL BREATH ALCOHOL TEST 1. EACH STUDENT MUST PERFORM THE TWO SIMULATOR “INTOXICATED” SUBJECT TESTS (DRUNK B,&C) 2. USE INFORMATION IN EACH SCENARIO FOR DATA ENTRY QUESTIONS 3. FOLLOW STANDARD OPERATING PROCEDURE MINUS 20 MINUTE WAIT PERIOD 4. KEEP SIMULATORS PLUGGED INTO AC OUTLETS 5. OBSERVE INSTRUMENT OPERATION AND DISPLAY MESSAGES DURING THE TEST

4. Rev 3.094 SECTION I: DRUNK A, B & C CONNECTIONS 1. CONNECT SIMULATOR DRUNK TO INTOXILYZER AS SHOWN IN SLIDE #6 2. DO NOT CONNECT THE SIMULATOR UNTIL DISPLAY READS PLEASE BLOW/R 3. DISCONNECT THE SIMULATOR FROM INTOXILYZER WHEN FINISHED BLOWING

5. Rev 3.095 SECTION I: DRUNK A, B & C CONNECTIONS Attach Simulator to Intoxilyzer Breath Tube INTOXILYZER 5000EN

6. Rev 3.096 SECTION II: ERROR MESSAGES 1. INSTRUCTOR MAY RUN ERROR MESSAGES OR STUDENTS MAY ROTATE IN TURN TO CONDUCT ERROR MESSAGES 2. FOLLOW DIRECTIONS IN MANUAL FOR GENERATING EACH ERROR MESSAGE 3. OBSERVE INSTRUMENT OPERATION AND DISPLAY MESSAGES

7. Rev 3.097 SECTION III: FUNCTION KEYS AND RESET SWITCH 1.FOLLOW THE DIRECTIONS IN THE SECTION FOR F1,F2, F5 AND F6 OPTIONS 2.INSTRUCTOR WILL DEMONSTRATE THIS SECTION 3.INSTRUCTOR WILL TRIP RESET SWITCH TO DEMONSTRATE INTOXILYZER RESET PROCEDURE

8. Rev 3.098 Go to Operator Practical