2.  Carbon fiber reinforced plastic (CFRP or CRP) is a light-weight, high strength, composite material.  Depending on the task, carbon fiber reinforced plastic is made with different kind of plastics and fibers.  A number of factors depend for the process of CFRP, molds are usually made from aluminum or fiberglass. For low volume parts, it can be made by putting carbon fiber fabric and resin into a mold and allowing to harden in a vacuum. To create larger volume parts, compression molding is used.

3.  Epoxy (Most commonly used)  Polyester  Such as Polyethylene Terephthalate (PET)  Vynilester  Nylon  Kevlar  Aluminum MEEN 4385 / 5303 (Advanced) Fabrication of Composite Structures

4. Typical PropertiesHigh Strength High Modulus Ultra-High Modulus Density (g/cm 3 )1.81.92.0 - 2.1 Young's Modulus (GPa)230370520 - 620 Tensile Strength (GPa)2.481.791.03 - 1.31 Tensile Elongation (%)1.10.50.2 Table for carbon fibers

5.  In cars, CFRP is used in doors, hoods, fenders, chasis, and support frames for the engine and transmission.  In airplanes, CFRP is used in fuselage sections called barrels.  Other applications, racing bicycles, rackets, fishing rods, Tail of an RC helicopter, made of CFRP Fuselage mold section of the Boeing 787 Dreamliner

6.  Reduces weight.  Improves fuel efficiency.  Easier to mold and work.  Reduces drag.  Reduces pollution.  Lesser material used.  Longer lifetime.  Less maintenance. A car’s pollution

7.  http://www.aip.org/dbis/stories/2006/15132.html  http://www.sciencedaily.com/videos/2006/0211- cars_of_the_future_plastic_makes_perfect.htm  http://www.conceptsalesinc.com/carbon-fiber- reinforced-plastic.htm  http://www.fhwa.dot.gov/BRIDGE/frp/frp197.cfm http://www.fhwa.dot.gov/BRIDGE/frp/frp197.cfm  Peel, Dr. Larry., MEEN 4385 / 5303 (Advanced) Fabrication of Composite Structures. http://www.engineer.tamuk.edu/departments/ieen/f aculty/DrLPeel/Courses/composites_fab_class.html. Spring 2008. http://www.engineer.tamuk.edu/departments/ieen/f aculty/DrLPeel/Courses/composites_fab_class.html