1. Panasonic Electric Works Europe AG Hotz Slide 1 Overview Screen creation software designed for the GT series

2. Panasonic Electric Works Europe AG Hotz Slide 2 Current Version Current Version: GTWIN 2.93 (Multi Language Version!)

3. Panasonic Electric Works Europe AG Hotz Slide 3 Create a new Project Create a new project. Select GT and PLC Model.

4. Panasonic Electric Works Europe AG Hotz Slide 4 Create a new Project Double-click to open a base screen.

5. Panasonic Electric Works Europe AG Hotz Slide 5 Create a new Project Now the system is ready for programming!

6. Panasonic Electric Works Europe AG Hotz Slide 6 Parts and Their Functions

7. Panasonic Electric Works Europe AG Hotz Slide 7 Parts and Their Functions Drag and drop some parts onto the base screen. Switch Lamp Data Keyboard Function Switch Bar Graph

8. Panasonic Electric Works Europe AG Hotz Slide 8 Parts and Their Functions Double-click the switch part that has been placed on the base screen to set its attributes. What appears on the tabs may differ depending on the part and which GT model you have selected.

9. Panasonic Electric Works Europe AG Hotz Slide 9 Parts and Their Functions If you want to allow the user to input values for devices such as a PLC with a data part, the data part must be used in conjunction with a keyboard part or a keyboard screen.

10. Panasonic Electric Works Europe AG Hotz Slide 10 GT Configuration Via File  Configuration, you can configure: GTWIN the GT unit Make sure that your PLC does not use the word or bit areas, i.e. addresses assigned under "Basic Communication Area to PLC", for any other purpose!

11. Panasonic Electric Works Europe AG Hotz Slide 11 GT Configuration Set the communication parameters

12. Panasonic Electric Works Europe AG Hotz Slide 12 Transfer Once your PC and the GT unit are connected and communication is working, you can transfer data from GTWIN  GT or from GT  GTWIN. What appears in the "Transfer Data" dialog depends on your GT unit.

13. Panasonic Electric Works Europe AG Hotz Slide 13 Exercise Exercise: Place a lamp and a switch. The lamp should be on as long as the switch is pressed. Place a data part that is controlled by a keyboard. Display the current value of the data part with a bar graph.

14. Panasonic Electric Works Europe AG Hotz Slide 14 Thank you very much