1. © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public ITE PC v4.0 Chapter 1 1 Configuring Network Devices Working at a Small-to-Medium Business or ISP – Chapter 5

2. ITE PC v4.0 Chapter 1 2 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Objectives  Configure a router with an initial configuration.  Use Cisco SDM to configure a Cisco ISR with LAN connectivity, Internet connectivity and basic NAT  Configure a Cisco router for LAN connectivity, Internet connectivity and NAT using the Cisco IOS CLI of the Cisco IOS software  Configure a WAN connection from a customer premise to an ISP.  Describe, setup and configure a stand-alone LAN switch

3. ITE PC v4.0 Chapter 1 3 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a New ISR  Identify the key components on a Cisco ISR

4. ITE PC v4.0 Chapter 1 4 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Cisco IOS Software  Identify common software image features

5. ITE PC v4.0 Chapter 1 5 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a New ISR  Describe the procedures to physically set up a new Cisco ISR

6. ITE PC v4.0 Chapter 1 6 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a New ISR  Describe the ways a Cisco ISR can be configured

7. ITE PC v4.0 Chapter 1 7 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a New ISR  Document the configuration of a router with a checklist

8. ITE PC v4.0 Chapter 1 8 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Using Cisco SDM to configure a Cisco ISR  Describe and perform the steps used to configure LAN and Internet connections on a Cisco ISR using Cisco SDM.

9. ITE PC v4.0 Chapter 1 9 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Using Cisco SDM to configure a Cisco ISR  Configure dynamic NAT using Cisco SDM

10. ITE PC v4.0 Chapter 1 10 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a Cisco router using the Cisco IOS CLI  Describe the role of the CLI in the Cisco IOS and different modes

11. ITE PC v4.0 Chapter 1 11 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a Cisco router using the Cisco IOS CLI  Describe what router configuration information the Cisco IOS CLI show commands provide

12. ITE PC v4.0 Chapter 1 12 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a Cisco router using the Cisco IOS CLI  Navigate the Cisco IOS CLI and perform basic setup configuration.

13. ITE PC v4.0 Chapter 1 13 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a Cisco router using the Cisco IOS CLI  Configure serial and Ethernet interfaces on a router

14. ITE PC v4.0 Chapter 1 14 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a Cisco router using the Cisco IOS CLI  Configure a default route for the Cisco router

15. ITE PC v4.0 Chapter 1 15 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a Cisco router using the Cisco IOS CLI  Describe the steps to configure a Cisco router as a DHCP Server

16. ITE PC v4.0 Chapter 1 16 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Configure a Cisco router using the Cisco IOS CLI  Configure static NAT on a Cisco router using Cisco IOS CLI

17. ITE PC v4.0 Chapter 1 17 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Backing up a Router Configuration  Perform backup and system restore using a TFTP server

18. ITE PC v4.0 Chapter 1 18 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Initial Cisco 2960 Switch Configuration  Identify the key components on a Cisco Catalyst 2960 Series Switch

19. ITE PC v4.0 Chapter 1 19 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Initial Cisco 2960 Switch Configuration  Perform basic physical set up of a stand-alone LAN switch

20. ITE PC v4.0 Chapter 1 20 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Initial Cisco 2960 Switch Configuration  Describe how a switch can be managed using a management network interface (VLAN1)

21. ITE PC v4.0 Chapter 1 21 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Initial Cisco 2960 Switch Configuration  Connect the stand-alone LAN switch to the router and verify connectivity

22. ITE PC v4.0 Chapter 1 22 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Connecting the CPE to the ISP  Describe the steps to install Customer Premise Equipment (CPE)  Describe necessary installation documentation

23. ITE PC v4.0 Chapter 1 23 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Workplace Safety  Describe good safety practices when installing network equipment

24. ITE PC v4.0 Chapter 1 24 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Connecting the CPE to the ISP  Describe the range of customer connections over a WAN

25. ITE PC v4.0 Chapter 1 25 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Connecting the CPE to the ISP  Describe the business and technical justifications for selecting a specific type of WAN

26. ITE PC v4.0 Chapter 1 26 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Connecting the CPE to the ISP  Describe the steps to configure a Cisco ISR using SSH

27. ITE PC v4.0 Chapter 1 27 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Connecting the CPE to the ISP  Describe the procedure for configuring a WAN connection between two routers

28. ITE PC v4.0 Chapter 1 28 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Summary  The Integrated Services Router (ISR) is a good choice for small to medium businesses and ISP-managed customers.  ISRs can be initially configured using SDM or the router IOS CLI.  When using the CLI, “show” commands verify configuration elements.  Switches are assigned IP addresses by configuring them on the management interface, VLAN 1.  An installation plan can minimize disruption to a network when new devices are being added.  Good safety practices must be following when performing installations, to minimize the danger to both technician and device.  Documentation is necessary, both when configuring and when installing network devices.

29. ITE PC v4.0 Chapter 1 29 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public