1. Admin Panel

2. Double Click the Icon on your desktop

3. Enter Username and Password

4. Home Page

5. Assign and Release Unit(s)

6. SIM Card & Unit Manager

7. Go to Unit Stock Manager

8. Assign Unit(s) to Technician

9. Release Units for Installation

10. Release Unit Package

11. Units Released and may be Installed

12. Do Not Release Units for Installation

13. Wait for Unit Release Form from Technician

14. Package Release Form Received by Technician

15. Package ID not yet Received

16. Blank Package ID

17. Release Form Signed by Technician confirming Receipt

18. Scan Package ID into System

19. Units Released and may be Installed

20. Assign and Release SIM Cards

21. Assign SIM Cards to Technician Click to Open SIM Stock Manager Select SIM cards Click to Assign Selected SIM Cards to Technician

22. Select and Assign SIM Cards Select a technician and assign

23. Release SIM Package Click to Release SIM Package

24. Scan Package ID and Release Click to Scan a Package ID to release

25. Technicians Mobi Site Tutorial

26. Go To - new.ddtrack1.co.zanew.ddtrack1.co.za Go to Office Login, then click on Technician Login

27. Mobi/Technician Site Homepage Click to view job cards

28. Displays Issued Job Cards Click to select a job card

29. Job – New Installation

30. Displays Job Card The technician must fill in all the details

31. Registration Number Required field must be filled in correctly

32. VIN Number Required field must be filled in correctly

33. Bulletin Code

34. Select Bulletin Code Click to select Bulletin Code Click to open Bulletin Code list

35. IMEI Number The technician must select assigned stock

36. Select IMEI Number Click to select Unit Installed in this Vehicle Click to open Technicians Unit stock list

37. Select SIM Card Number Click to select SIM Card Installed in this Unit Click to open Technicians SIM Card stock list

38. Enter Technician’s Feedback Type any message concerning this installation

39. Select the Company Group that this vehicle belongs to

40. Final step to Complete this Job Click “Done”

41. Please do not Cancel or Reload Click “OK”

42. Confirmation Message Click “Back” to start a new Job

43. Job Card Information Processed Click to Select a new Job Confirmation message

44. Job Card Steps After Once the job card is completed, the installation has to go through a series of checks. These check are performed in the Admin Panel by designated personnel.

45. Thanks for your time This tutorial is not fully completed, more information will be added soon.