Presentation is loading. Please wait.

Presentation is loading. Please wait.

TURBO FLANGES We specialize in design, CNC milling, metal turning, plasma cutting, and TIG welding all done in house. Please contact us for further information.

Published byCharity Weaver Modified over 9 years ago

Similar presentations

Presentation on theme: "TURBO FLANGES We specialize in design, CNC milling, metal turning, plasma cutting, and TIG welding all done in house. Please contact us for further information."— Presentation transcript:

1 TURBO FLANGES We specialize in design, CNC milling, metal turning, plasma cutting, and TIG welding all done in house. Please contact us for further information.

2 Services Offered: Fabrication and Manufacturing We specialize in design, CNC milling, metal turning, plasma cutting, and TIG welding all done in house. Please contact us for further information.

3 . CNC Machined Steel. 1" OD,.875" ID, 1.5" height, threw hole for 3/8" or 10mm bolt..Hose Barb Fitting.CNC machined 6061 aluminum. Designed for 5/8" hose.. Locating ring on weld end for easy alignment w/ hole on work piece

4 2. Garrett V-band Turbine Inlet Flange Garrett V-band Turbine Inlet FlangeGarrett V-band Turbine Inlet Flange. 304 stainless steel.Fits Garrett GT28/30/35R v-band (inlet) turbine housings V-Band Assembly. 304 stainless steel v-band flange (3.1" OD, slip fit for 2.5" tubing,.625" length). Clampco stainless steel clamp

5  Phone: 701-282-2902  www.turbo-flanges.com www.turbo-flanges.com

Download ppt "TURBO FLANGES We specialize in design, CNC milling, metal turning, plasma cutting, and TIG welding all done in house. Please contact us for further information."

Similar presentations

CALICE - European DHCAL meeting Ciemat Mechanical Workshop and test of the Stainless steel plate machining for the CALICE-HCAL. Enrique Calvo Alamillo.

CALICE - European DHCAL meeting Ciemat Mechanical Workshop and test of the Stainless steel plate machining for the CALICE-HCAL. Enrique Calvo Alamillo.
HEATING AND PLUMBING FEF

HEATING AND PLUMBING FEF
Machining a V-Block Flexible Manufacturing Copyright © Texas Education Agency, 2013. All rights reserved. 1.

Machining a V-Block Flexible Manufacturing Copyright © Texas Education Agency, All rights reserved. 1.
AQUA TOOL, LLC. 32360 Edward Avenue Madison Heights, MI 48071 Phone: (248) 307-1984 Fax: (248) 307-1986 Website:

AQUA TOOL, LLC Edward Avenue Madison Heights, MI Phone: (248) Fax: (248) Website:
PNEUMATIC SYSTEMS INTERNATIONAL UNLOCKING TOMORROWS TECHNOLOGY TODAY.

PNEUMATIC SYSTEMS INTERNATIONAL UNLOCKING TOMORROWS TECHNOLOGY TODAY.
Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.

Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.
Specializing in: n Precision Machining n Sheetmetal Fabrication n Structural Fabrication n Metal Finishing n Painting/Powdercoating n Custom design/reverse.

Specializing in: n Precision Machining n Sheetmetal Fabrication n Structural Fabrication n Metal Finishing n Painting/Powdercoating n Custom design/reverse.
0 UNIVERSAL REPAIR PROGRAM: CATALYTIC CONVERTERS For petrol engines: Bosal nr = 099-870 Design = oval Engines up to 5.9L Total length (mm) = 419 Profile.

0 UNIVERSAL REPAIR PROGRAM: CATALYTIC CONVERTERS For petrol engines: Bosal nr = Design = oval Engines up to 5.9L Total length (mm) = 419 Profile.
1 Manufacturing Processes –Manufacturing: transforming raw materials into products –Manufacturing processes: operations to achieve manufacturing Cutting.

1 Manufacturing Processes –Manufacturing: transforming raw materials into products –Manufacturing processes: operations to achieve manufacturing Cutting.
Welcome to Finger Lakes Conveyors Located on Route 414, in Waterloo, New York Introduction Shop Tour Shop Tour Welding Assembly Machining Engineering.

Welcome to Finger Lakes Conveyors Located on Route 414, in Waterloo, New York Introduction Shop Tour Shop Tour Welding Assembly Machining Engineering.
 Introduction  Designing of Die Block  Process of making 180 0 Press Form Points to be Covered PRESS FORM AND RUBBER TECHNOLOGY.

 Introduction  Designing of Die Block  Process of making Press Form Points to be Covered PRESS FORM AND RUBBER TECHNOLOGY.
Heavy Engineering & Reclamation Specialists. Baker & Provan Capability Heavy Engineering –Reclamation Specialists –Machining, –Fabrication, –Assembly.

Heavy Engineering & Reclamation Specialists. Baker & Provan Capability Heavy Engineering –Reclamation Specialists –Machining, –Fabrication, –Assembly.
MMEC LLC dba MidwestMetalcraft & Equipment 200 Industrial Drive Windsor, MO 65360 Office: (660) 647-3167 Fax: (660) 647-5580 www.4mmc.com.

MMEC LLC dba MidwestMetalcraft & Equipment 200 Industrial Drive Windsor, MO Office: (660) Fax: (660)
© 2013 Toshiba Corporation Toshiba Electron Tubes & Devices Co., Ltd. November, 2013 Scope of Disclosure Owner Comparison of fabrication techniques in.

© 2013 Toshiba Corporation Toshiba Electron Tubes & Devices Co., Ltd. November, 2013 Scope of Disclosure Owner Comparison of fabrication techniques in.
Ciemat Mechanical Workshop and test of the Stainless steel plate machining for the CALICE-HCAL. Enrique Calvo/Mary Cruz Fouz Lyon 6-6-2008.

Ciemat Mechanical Workshop and test of the Stainless steel plate machining for the CALICE-HCAL. Enrique Calvo/Mary Cruz Fouz Lyon
Manufacturing Assembly Plan P10007- Mechanical Spine Test Platform.

Manufacturing Assembly Plan P Mechanical Spine Test Platform.
LINAC LASER NOTCHER READINESS REVIEW August 5 th, 2014 Kevin Duel – Mechanical Support Engineer.

LINAC LASER NOTCHER READINESS REVIEW August 5 th, 2014 Kevin Duel – Mechanical Support Engineer.
NOAA Humidifier – smaller (lower flow) version (yours will have larger tubing and fittings) Ribbon heater Thermal cutoff switch Swagelok reducing union,

NOAA Humidifier – smaller (lower flow) version (yours will have larger tubing and fittings) Ribbon heater Thermal cutoff switch Swagelok reducing union,
Connecting to industry. Swivels Dixon Valve & Coupling Company manufactures Swivel Joints that are intended for piping applications. Be sure to contact.

Connecting to industry. Swivels Dixon Valve & Coupling Company manufactures Swivel Joints that are intended for piping applications. Be sure to contact.
Laser Beam Machining Done By: Murad.

Laser Beam Machining Done By: Murad.

Similar presentations

Ads by Google