1. McGraw-Hill/Irwin Copyright © 2011 by the McGraw-Hill Companies, Inc. All rights reserved.

2. 8-2 Key Concepts and Skills Understand: –The payback rule and its shortcomings –Accounting rates of return and their problems –The internal rate of return and its strengths and weaknesses –The net present value rule and why it is the best decision criteria –The modified internal rate of return –The profitability index and its relation to NPV

3. 8-3 Chapter Outline 8.1Net Present Value 8.2The Payback Rule 8.3The Average Accounting Return 8.4The Internal Rate of Return 8.5The Profitability Index 8.6The Practice of Capital Budgeting

4. 8-4 Capital Budgeting Analysis of potential projects Long-term decisions Large expenditures Difficult/impossible to reverse Determines firm’s strategic direction

5. 8-5 All cash flows considered? TVM considered? Risk-adjusted? Ability to rank projects? Indicates added value to the firm? Good Decision Criteria

6. 8-6 Net Present Value How much value is created from undertaking an investment? Step 1: Estimate the expected future cash flows. Step 2: Estimate the required return for projects of this risk level. Step 3: Find the present value of the cash flows and subtract the initial investment to arrive at the Net Present Value.

7. 8-7 Net Present Value Sum of the PVs of all cash flows Initial cost often is CF 0 and is an outflow. NPV = ∑ n t = 0 CF t (1 + R) t NPV = ∑ n t = 1 CF t (1 + R) t - CF 0 NOTE: t=0

8. 8-8 NPV – Decision Rule If NPV is positive, accept the project NPV > 0 means: –Project is expected to add value to the firm –Will increase the wealth of the owners NPV is a direct measure of how well this project will meet the goal of increasing shareholder wealth.

9. 8-9 Sample Project Data You are looking at a new project and have estimated the following cash flows, net income and book value data: –Year 0:CF = -165,000 –Year 1:CF = 63,120 NI = 13,620 –Year 2:CF = 70,800 NI = 3,300 –Year 3:CF = 91,080 NI = 29,100 –Average book value = $72,000 Your required return for assets of this risk is 12%. This project will be the example for all problem exhibits in this chapter.

10. 8-10 Computing NPV for the Project Using the formula: NPV = -165,000/(1.12) 0 + 63,120/(1.12) 1 + 70,800/(1.12) 2 + 91,080/(1.12) 3 = 12,627.41

11. 8-11 DisplayYou Enter ‘ ' C00165000 S!# C0163120 !# F01 1 !# C0270800 !# F021 !# C0391080 !# F031 !#( I12 !# NPV % 12,627.41 Cash Flows: CF0= -165000 CF1= 63120 CF2= 70800 CF3= 91080 Computing NPV for the Project Using the TI BAII+ CF Worksheet

12. 8-12 Rationale for the NPV Method NPV = PV inflows – Cost NPV=0 → Project’s inflows are “exactly sufficient to repay the invested capital and provide the required rate of return” NPV = net gain in shareholder wealth Rule: Accept project if NPV > 0

13. 8-13 NPV Method –Meets all desirable criteria Considers all CFs Considers TVM Adjusts for risk Can rank mutually exclusive projects –Directly related to increase in V F –Dominant method; always prevails

14. 8-14 Payback Period How long does it take to recover the initial cost of a project? Computation –Estimate the cash flows –Subtract the future cash flows from the initial cost until initial investment is recovered –A “break-even” type measure Decision Rule – Accept if the payback period is less than some preset limit

15. 8-15 Computing Payback for the Project Do we accept or reject the project?

16. 8-16 Decision Criteria Test Payback Does the payback rule: –Account for the time value of money? –Account for the risk of the cash flows? –Provide an indication about the increase in value? –Permit project ranking? Should we consider the payback rule for our primary decision rule?

17. 8-17 Advantages and Disadvantages of Payback Advantages –Easy to understand –Adjusts for uncertainty of later cash flows –Biased towards liquidity Disadvantages –Ignores the time value of money –Requires an arbitrary cutoff point –Ignores cash flows beyond the cutoff date –Biased against long- term projects, such as research and development, and new projects ASKS THE WRONG QUESTION !

18. 8-18 Average Accounting Return Many different definitions for average accounting return (AAR) In this book: –Note: Average book value depends on how the asset is depreciated. Requires a target cutoff rate Decision Rule: Accept the project if the AAR is greater than target rate.

19. 8-19 Computing AAR for the Project Sample Project Data: –Year 0:CF = -165,000 –Year 1:CF = 63,120 NI = 13,620 –Year 2:CF = 70,800 NI = 3,300 –Year 3:CF = 91,080 NI = 29,100 –Average book value = $72,000 Required average accounting return = 25% Average Net Income:  ($13,620 + 3,300 + 29,100) / 3 = $15,340 AAR = $15,340 / 72,000 =.213 = 21.3% Do we accept or reject the project?

20. 8-20 Decision Criteria Test - AAR Does the AAR rule account for the time value of money? Does the AAR rule account for the risk of the cash flows? Does the AAR rule provide an indication about the increase in value? Should we consider the AAR rule for our primary decision criteria?

21. 8-21 Advantages and Disadvantages of AAR Advantages –Easy to calculate –Needed information usually available Disadvantages –Not a true rate of return –Time value of money ignored –Uses an arbitrary benchmark cutoff rate –Based on accounting net income and book values, not cash flows and market values

22. 8-22 Internal Rate of Return Most important alternative to NPV Widely used in practice Intuitively appealing Based entirely on the estimated cash flows Independent of interest rates

23. 8-23 IRR Definition and Decision Rule Definition: –IRR = discount rate that makes the NPV = 0 Decision Rule: –Accept the project if the IRR is greater than the required return

24. 8-24 NPV vs. IRR IRR: Enter NPV = 0, solve for IRR. NPV: Enter r, solve for NPV

25. 8-25 Computing IRR For The Project Without a financial calculator or Excel, this becomes a trial-and-error process Calculator –Enter the cash flows as for NPV –Press IRR and then CPT –IRR = 16.13% > 12% required return Do we accept or reject the project?

26. 8-26 DisplayYou Enter ‘ ' C00165000 S!# C0163120 !# F01 1 !# C0270800 !# F021 !# C0391080 !# F031 !#) IRR % 16.1322 Cash Flows: CF0= -165000 CF1= 63120 CF2= 70800 CF3= 91080 Computing IRR for the Project Using the TI BAII+ CF Worksheet

27. 8-27 Calculating IRR with Excel Start with the cash flows as you did to solve for NPV Use the IRR function –Enter the range of cash flows, beginning with the initial cash flow (Cash flow 0) –You can enter a guess, but it is not necessary –The default format is a whole percent

28. 8-28 NPV Profile For The Project IRR = 16.13%

29. 8-29 Decision Criteria Test IRR Does the IRR rule: –Account for the time value of money? –Account for the risk of the cash flows? –Provide an indication about the increase in value? –Permit project ranking? Should we consider the IRR rule for our primary decision criteria?

30. 8-30 IRR - Advantages Preferred by executives –Intuitively appealing –Easy to communicate the value of a project If the IRR is high enough, may not need to estimate a required return Considers all cash flows Considers time value of money Provides indication of risk

31. 8-31 IRR - Disadvantages Can produce multiple answers Cannot rank mutually exclusive projects Reinvestment assumption flawed

32. 8-32 NPV vs. IRR NPV and IRR will generally give the same decision Exceptions –Non-conventional cash flows Cash flow sign changes more than once –Mutually exclusive projects Initial investments are substantially different Timing of cash flows is substantially different Will not reliably rank projects

33. 8-33 IRR & Non-Conventional Cash Flows “Non-conventional” –Cash flows change sign more than once –Most common: Initial cost (negative CF) A stream of positive CFs Negative cash flow to close project. For example, nuclear power plant or strip mine. –More than one IRR …. –Which one do you use to make your decision?

34. 8-34 Multiple IRRs Descartes Rule of Signs Polynomial of degree n → n roots –When you solve for IRR you are solving for the root of an equation –1 real root per sign change –Rest = imaginary (i 2 = -1)

35. 8-35 Non-Conventional Cash Flows Suppose an investment will cost $90,000 initially and will generate the following cash flows: –Year 1: 132,000 –Year 2: 100,000 –Year 3: -150,000 The required return is 15%. Should we accept or reject the project?

36. 8-36 NPV Profile IRR = 10.11% and 42.66% When you cross the x-axis more than once, there will be more than one return that solves the equation

37. 8-37 Independent versus Mutually Exclusive Projects Independent –The cash flows of one project are unaffected by the acceptance of the other. Mutually Exclusive –The acceptance of one project precludes accepting the other.

38. 8-38 Reinvestment Rate Assumption IRR assumes reinvestment at IRR NPV assumes reinvestment at the firm’s weighted average cost of capital (opportunity cost of capital) –More realistic –NPV method is best NPV should be used to choose between mutually exclusive projects

39. 8-39 Example of Mutually Exclusive Projects PeriodProject AProject B 0-500-400 1325 2 200 IRR19.43%22.17% NPV64.0560.74 The required return for both projects is 10%. Which project should you accept and why?

40. 8-40 NPV Profiles IRR for A = 19.43% IRR for B = 22.17% Crossover Point = 11.8%

41. 8-41 Two Reasons NPV Profiles Cross Size (scale) differences. –Smaller project frees up funds sooner for investment. –The higher the opportunity cost, the more valuable these funds, so high discount rate favors small projects. Timing differences. –Project with faster payback provides more CF in early years for reinvestment. –If discount rate is high, early CF especially good

42. 8-42 Conflicts Between NPV and IRR NPV directly measures the increase in value to the firm Whenever there is a conflict between NPV and another decision rule, always use NPV IRR is unreliable in the following situations: –Non-conventional cash flows –Mutually exclusive projects

43. 8-43 Modified Internal Rate of Return ( MIRR ) Controls for some problems with IRR Three Methods: 1.Discounting Approach = Discount future outflows to present and add to CF 0 2. Reinvestment Approach = Compound all CFs except the first one forward to end 3. Combination Approach – Discount outflows to present; compound inflows to end –MIRR will be unique number for each method –Discount (finance) /compound (reinvestment) rate externally supplied

44. 8-44 MIRR First, find PV and TV (FR = RR = 20%) 155.0-100.0 012 20% - 60.00 20% TV inflows -129.444 PV outflows 186 -69.444 186

45. 8-45 Second: Find discount rate that equates PV and TV MIRR = 19.87% 186.0 0 1 2 -129.444 TV inflows PV outflows MIRR = 19.87% $129.444 = $186.0 (1+MIRR) 2

46. 8-46 MIRR versus IRR MIRR correctly assumes reinvestment at opportunity cost = WACC MIRR avoids the multiple IRR problem Managers like rate of return comparisons, and MIRR is better for this than IRR

47. 8-47 Profitability Index Measures the benefit per unit cost, based on the time value of money –A profitability index of 1.1 implies that for every $1 of investment, we create an additional $0.10 in value Can be very useful in situations of capital rationing Decision Rule: If PI > 1.0  Accept

48. 8-48 Profitability Index For conventional CF Projects: PV(Cash Inflows) Absolute Value of Initial Investment

49. 8-49 Advantages and Disadvantages of Profitability Index Advantages –Closely related to NPV, generally leading to identical decisions Considers all CFs Considers TVM –Easy to understand and communicate –Useful in capital rationing Disadvantages –May lead to incorrect decisions in comparisons of mutually exclusive investments (can conflict with NPV)

50. 8-50 Profitability Index Example of Conflict with NPV

51. 8-51 Capital Budgeting In Practice Consider all investment criteria when making decisions NPV and IRR are the most commonly used primary investment criteria Payback is a commonly used secondary investment criteria All provide valuable information

52. 8-52 Summary Calculate ALL -- each has value MethodWhat it measures Metric NPV  $ increase in VF $$ Payback  Liquidity Years AAR  Acct return (ROA) % IRR  E(R), risk % PI  If rationed Ratio

53. 8-53 NPV Summary Net present value = –Difference between market value (PV of inflows) and cost –Accept if NPV > 0 –No serious flaws –Preferred decision criterion

54. 8-54 IRR Summary Internal rate of return = –Discount rate that makes NPV = 0 –Accept if IRR > required return –Same decision as NPV with conventional cash flows –Unreliable with: Non-conventional cash flows Mutually exclusive projects –MIRR = better alternative

55. 8-55 Payback Summary Payback period = –Length of time until initial investment is recovered –Accept if payback < some specified target –Doesn’t account for time value of money –Ignores cash flows after payback –Arbitrary cutoff period –Asks the wrong question

56. 8-56 AAR Summary Average Accounting Return= –Average net income/Average book value –Accept if AAR > Some specified target –Needed data usually readily available –Not a true rate of return –Time value of money ignored –Arbitrary benchmark –Based on accounting data not cash flows

57. 8-57 Profitability Index Summary Profitability Index = –Benefit-cost ratio –Accept investment if PI > 1 –Cannot be used to rank mutually exclusive projects –May be used to rank projects in the presence of capital rationing

58. Chapter 8 END