2. Discuss the major characteristics of the four Biosafety Levels. Define “Risk Group” and give an example of each. Discuss how Risk Groups are used in conjunction with risk assessment to set Biosafety Levels.

3. Assignment of agent based on risk assessment Depends on agent and conditions of use Requires professional judgment World Health Organization National Institutes of Health

4. Suitable for work involving well-characterized agents not known to consistently cause disease in immunocompetent adult humans minimal potential hazard to laboratory personnel and the environment. laboratories are not necessarily separated from the general traffic patterns in the building. Work is typically conducted on open bench tops using standard microbiological practices. Special containment equipment or facility design is not required, Laboratory personnel must have specific training in the procedures conducted in the laboratory and must be supervised by a scientist with training in microbiology or a related science.

5. Biosafety Level 1

7. Builds upon BSL-1 BSL-2 is suitable for work involving agents that pose moderate hazards to personnel and the environment. Laboratory personnel have specific training in handling pathogenic agents Personnel are supervised by scientists competent in handling infectious agents and associated procedures Access to the laboratory is restricted when work is being conducted all procedures in which infectious aerosols or splashes may be created are conducted in biological safety cabinets (BSCs) or other physical containment equipment.

8. Biosafety Level 2

10. Is applicable to clinical, diagnostic, teaching, research, or production facilities where work is performed with indigenous or exotic agents that may cause serious or potentially lethal disease through inhalation route exposure. Laboratory personnel must receive specific training in handling pathogenic and potentially lethal agents Must be supervised by scientists competent in handling infectious agents and associated procedures. Biosafety Level 2 plus all procedures involving the manipulation of infectious materials must be conducted within BSCs, or other physical containment devices Personnel wear additional appropriate personal protective equipment including respiratory protection as determined by risk assessment A BSL-3 laboratory has special engineering and design features. o Directional air flow

11. Biosafety Level 3

13. Required for work with dangerous and exotic agents that pose a high individual risk of life-threatening disease, aerosol transmission, or related agent with unknown risk of transmission. Agents with a close or identical antigenic relationship to agents requiring BSL-4 containment must be handled at this level until sufficient data are obtained either to confirm continued work at this level, or re-designate the level. Laboratory staff must have specific and thorough training in handling extremely hazardous infectious agents. Laboratory staff must understand the primary and secondary containment functions of standard and special practices, containment equipment, and laboratory design characteristics. All laboratory staff and supervisors must be competent in handling agents and procedures requiring BSL-4 containment. Access to the laboratory is controlled by the laboratory supervisor in accordance with institutional policies Two types of laboratory providing absolute separation of the worker from the infectious agents o Suit Laboratory o Cabinet Laboratory

14. Biosafety Level 4

16. BSL-2 BSL-3 BSL-1 CDC/NIH Guidelines Biosafety Levels (www.cdc.gov ) Lower Risk Higher Risk

17. Pathogenicity of the agent Modes of transmission and host range of organism Local availability of preventive measures Local availability of effective treatment World Health Organization National Institutes of Health

18. World Health Organization National Institutes of Health

19. World Health Organization National Institutes of Health

20. High individual risk, low community risk Pathogen usually causes serious human or animal disease but does not ordinarily spread to others Effective treatment and preventive measures are available World Health Organization National Institutes of Health

21. High individual and community risk A pathogen causes serious human or animal disease; readily transmitted from one individual to another Effective treatment and preventive measures are usually not available World Health Organization National Institutes of Health

22. Risk Group Biosafety LevelLaboratory TypeLaboratory Practices Safety Equipment 1 Basic – Biosafety Level 1 Basic teaching, research GMTNone; open bench work 2 Basic – Biosafety Level 2 Primary health services; diagnostic services, research GMT plus protective clothing, biohazards sign Open bench plus BSC for aerosols World Health Organization National Institutes of Health

23. Risk Group Biosafety LevelLaboratory TypeLaboratory Practices Safety Equipment 3 Containment- Biosafety Level 3 Special diagnostic services, research Level 2 + special clothing, access control, directed airflow BSC and/or other primary devices for all activities 4 Maximum Containment – Biosafety Level 4 Dangerous pathogen units Level 3 + airlock entry, shower exit, special waste disposal Class III BSC, or positive pressure suites with class II BSCs, double ended autoclave World Health Organization National Institutes of Health