Download presentation
Presentation is loading. Please wait.
Published byAmber Strickland Modified over 9 years ago
2
Develop Interpretation Strategy 4 4
3
Objectives Develop Interpretation Strategy -Observe the challenges on the data (data quality, fault complexity, event continuity, etc) -Build strong interpretation framework
4
Workflow Develop Interpretation Strategy 1.Scan through the data 2.Start from well and decide what horizon need to interpret to represent what reservoir 3.Build strong interpretation framework through out areas within good data quality and most continuous seismic events 4.Generating seismic attribute cube and Seismic Enhancement if necessary 5.Interpret faults then the horizons 6.Seismic attribute extraction
5
Scan Through The Data
6
5 (data courtesy of KIDRA)
7
Scan Through The Data
10
Start Interpretation From The Well
11
Line 90SW-23 Interpreting on 2D Seismic data
12
Improving Seismic Quality Original Data 3-6 Hz filter After Envelope Scaling
13
Improving Seismic Quality
14
Capturing Important Geologic Features
15
FLAT SPOTS Will these also be gas?? Is it water or oil? Possible Gas Sand Tr:482 2 IL :842 Tr:481 9 IL :879 Tr:481 5 IL :931 GAMBIR-1 PROSPECT Capturing Important Geologic Features
16
Improving Seismic Quality Through Multi-Attribute AMPLITUDESWEETNESSAMPLITUDE+SEMBLANCESWEETNESS+SEMBLANCE
17
16 Interpreting Fault
18
17 Difficulty to do fault interpretation onInline Easy to do fault /hor. Interpret. on Random line How important of identifying fault patterns
19
18 Boundary Faults Case 1 of New Workflow In Line Xline Random Line
20
19
21
20 Fault Planes
22
21 Boundary Faults Case 1 of New Workflow
23
22 Complex Faults area Case 2 of New Workflow
24
23 FAULT DELINEATION WORK FLOW EARLIER WORKFLOW Seiswork Even Similarity Prediction (ESP) SeisCube NEW WORKFLOW Seiswork Even Similarity Prediction (ESP) PostStack EarthCube AVI
25
24 Advanced workflow for complex fault system Create ESP Cube Poststack ESP Fault Interpretation Seiscube Conventional Seismic Data QC Random Line Book Marks Fun. Faults Edit SeisWorks Workflow 2000 Horizon Auto. Tracking ZAP! Horizon Interpretation Along random line SEISWORK MAPPING
26
25 New Fault Delineation Workflow New Fault Delineation Workflow ESP processing Image Enhancment AGC EC Fault Labeling Cube Math Threshold64-127, min100,max5000000 Voxbody detect Values in range16/32-127 (Volume+128)*1000=Fmax1 (Fmax1+original volume)+Fmax1= Fmax2 Check if any F missing yes no Convert to.3dv Cube Math Voxbody as mask (read to share Mom), *1000=Fmax Remain faults only Reduce unwanted “faults” Make faults in max values Add faults to original data Pick up missing faults Convert to.3dv For interpret Workflow 2001
27
26 STEP-1 Generate Event Similarity Prediction (ESP) Cube What is PostStack ESP? PostStack ESP (Event Similarity Prediction) processing provides a set of mathematical tools to assess the similarity of seismic data unbiased by any interpretation. Equation: is a dip shift term M = K= N + w/2 K= N - w/2 G K - H K + K= N + w/2 K= N - w/2 G K + H K +
28
27 STEP-1 Where ESP used? Fault Delineations Cross SectionMap View
29
28 STEP-1 Where ESP used? Stratigraphic Interpretation Map View Cross Section
30
29 STEP-1 ESP Cube
31
30 STEP-2 Perform ESP Image Enhancement (PostStack) Before Image EnhancementAfter Noise Image Enhancement (FK Fan Filter and AGC)
32
31 STEP-2 ESP Section before noise suppression (in EarthCube)
33
32 STEP-2 ESP map view (in EarthCube) Much noise
34
33 Much noise STEP-2 ESP Section highlighted using Max Opacity (in EarthCube)
35
34 Too much “faults” STEP-2 ESP Section after Image Enhancement (in EarthCube)
36
35 STEP-3 Faults Parameterization in EarthCube using Automated Voxbody Labeling Amplitudes, Takes the opacity curve Connectivity, Connects the cells Body Size, connect cell volume >XX voxels Rank by Volume, use opacity curve to select bodies by volume
37
36 STEP-3 Automated Fault-body Labeling and generate Cube
38
37 STEP-3 Before and After Fault Body Labeling BeforeAfter
39
38 STEP-4 Cube Math in AVI Faultbody label Cube 1 + Original Seismic Cube
40
39 Some faults missing STEP-4 Original Seismic with fault segments
41
40 STEP-5 Highlight fault segments within low amplitude range
42
41 STEP-6 Perform Cube Math to add new fault label cube to the original seismic data
43
42 Final Seismic Cube with fault traces
44
43 Seismic Section with fault traces
45
44 Fault traces in horizon slice
46
45 3D view of horizon with interpreted fault traces
47
46 New Fault Delineation Workflow New Fault Delineation Workflow ESP processing Image Enhancment AGC EC Fault Labeling Cube Math Threshold64-127, min100,max5000000 Voxbody detect Values in range16/32-127 (Volume+128)*1000=Fmax1 (Fmax1+original volume)+Fmax1= Fmax2 Check if any F missing yes no Convert to.3dv Cube Math Voxbody as mask (read to share Mom), *1000=Fmax Remain faults only Reduce unwanted “faults” Make faults in max values Add faults to original data Pick up missing faults Convert to.3dv For interpret Workflow 2001
48
47 Structural Interpretation Structural Interpretation Exclusive Polygon Inclusive Polygon
49
48 Correlation Mode
50
49 Editing Zapped Horizons with Polygon Mode Editing Zapped Horizons with Polygon Mode
51
50 Auto Polygon Generator Auto Polygon Generator
52
51 Horizon Interpretation Workshop Screen 1 Colt Data set Line 62 Start time 500 ms Color bar bluwhtrd
53
52 Horizon Interpretation Workshop Screen 2
54
53 Interpreting a Horizon Show Position Information Bar Horizon Interpretation Information Bar
55
54 Horizon Interpretation Mode Active Horizon Selected but not Active Horizon in defined color
56
55 Interpreting on Time Slices – Auto Tracking Mode Portion of horizon already interpreted
57
56 Zig Zag Display Choose any one of these methods to display the lines: Button 3 Select from Map ZigZag
58
57 Zig Zag Display Seismic View Seismic Select from Map ZigZag
59
58 Zig Zag Display Midpoint Icon, then to Map View Button 3 ZigZag
60
59 Intersection Circles Seismic View Contents Icon Toggle ON Horizon Intersection Circles OK
61
60 ZigZag Display Line 60 Trace 140 Tie Point Line 90 Note the Select from Map icon
62
61 Loop Display Choose any one of these methods to display the lines: Click Button 3, then select Select from Map Loop In the Seismic View, select Seismic Select from Map Loop Click the Midpoint icon, and then in Map View, click Button 3, and select Loop
63
62 Loop Display Button 1 Button 2
64
63 Loop Display Note the Select from Map icon
65
64 Arbitrary Line Display Choose any one of these methods to display the lines: Click Button 3, and select Select from Map Point to Point In Seismic View, select Seismic Select from Map Point to Point Click the Midpoint icon, and then in Map View, click Button 3, and select Point to Point
66
65 Arbitrary Line Display Button 1 Use button 3 to open the popup menu. Select Begin Display
67
66 Arbitrary Line Display
68
67 Seismic Fold and Intersection Displays Seismic fold and intersection displays allow you to choose a tie line to display at any point on the line currently displaying Folds display the intersection of the requested line and the original line Intersections display the entire tie line
69
68 Seismic Fold and Intersection Displays Fold from Seismic Cursor location at Button 1 click Resulting Display Note these instructions
70
69 Seismic Fold and Intersection Displays Intersection from Seismic Resulting Display Place cursor at the desired intersection then press button 1.
71
70 Delta system Interpreting Stratigraphic
72
71 Delta Fan
73
72 Delta Fan
74
73
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.