1. Project on- Project by- Kundan R Avchare Divyanshu jain Tarang bansal Faculty adviser- Prof. R.K. Mandloi

2. Magnetorheological Fluids o sometimes referred to as ferrofluids o often made by mixing ferromagnetic particles (iron, cobalt, etc) into a carrier fluid such as silicone oil or even water.

3. Magnetorheological Fluids –the ferromagnetic particles are forced into an aligned arrangement when the fluid is placed in a magnetic field

4. Magnetorheological Fluids –The alignment of the particles in the fluid will also cause the viscosity of the fluid to increase, making the fluid seem “thicker.”

5.  Braking is considered to be one of the most important aspects in driving.  ABS is the most advance breaking system available at present.  ABS helps the driver stop quicker under wet or slippery conditions.  Allows the driver to brake and steer at the same time.  A very useful safety feature of car during emergency braking.

6. A : Wheel Speed Sensors B : ECU C : Pressure Release Valves D : Brake Line to Caliper

8.  High cost  Complicated mechanisms  Heavy system

10.  Simple design.  Less no. of components.  More sensitive

11. Dampers Disc Brakes Drum Brakes

12. Preliminary Analysis ( 1 month) Detailed Study of existing Systems Conceptual Design Detailed Design (2 months) Fluid Design Design of ECU and sensors Material Selection for Equipment Prototype Fabrication and Testing (1/2 months) Fabrication and testing of design with currently used equipment. Market Research (1/2 months) Search and procurement of compatible materials for equipment and fluid Fabrication (1/2 months) Final fabrication and assembly of system Performance Testing (1/2 months) Testing and determination of various performance parameters