1. VARCO PRUDEN’S Self Curbing Day Lighting Solution PrisMAX SL for SSR & HWR Roof’s

2. PrisMAX SL GUIDES There are many versions of PrisMAX SL Installation Guides. It is important to review the guide that is sent with the “For Construction Package” before installation. Before installation, contact Varco Pruden if guide is lost or missing. This Presentation show the Basic installation on SSR. Installation on HWR is similar, but many parts will be different.

3. PrisMAX SL MODEL

4. PrisMAX SL DIVERTER Current Model Lens has top mounted screws vs side installed.

5. PrisMAX SL CROSS SECTION

6. BE SAFE!

7. TOOLS Note: A Rivet Tool for a 9/32” Olympic Rivet will be required for installing side rail rivets.

8. PARTS

12. BEGIN Locating the PrisMAX Unit Cutting the Rib

13. Locating the PrisMAX Unit Cutting Access Hole Preparing Diverter

14. Sealing the Closures

15. Preparing the Support Plate and the diverter

16. Preparing the Support Plate and the diverter (cont.)

17. Installing the Support Plate and the diverter

19. Installing the Side Rails

20. Multiple Units

21. Installing Side Rails

22. Upper Diverter Closure

23. Lower Diverter Closure & Cutting Access Hole

24. Lower Diverter Closure & Cutting Access Hole

25. Cutting The Roof Panels

26. Insulation

28. Foam Tape

29. Insulation Trim

31. Accessories

33. Tape When Accessories Are Used

34. Preparing for Lens

35. Attaching the Lens THE END of PrisMAX Installation

36. Installation of the “PrisMAX SL” Locate and make your cut

37. Installation of the “PrisMAX SL” Cut the roof panel for stiffener plate

38. Installation of the “PrisMAX SL” Locate and install plugs on stiffener plate

39. Installation of the “PrisMAX SL” Install Stiffener Plate

40. Installation of the “PrisMAX SL” Install Diverter

41. Installation of the “PrisMAX SL” Install Front Diverter

42. Installation of the “PrisMAX SL” Measure and Install Lower Closure

43. Installation of the “PrisMAX SL” Cut out panel inside rail

44. Installation of the “PrisMAX SL” Panel cut out

45. Installation of the “PrisMAX SL” Pull the fiberglass Insulation out

46. Installation of the “PrisMAX SL” Cut the facing

47. Installation of the “PrisMAX SL” Facing on side of rail

48. Installation of the “PrisMAX SL” Facing on side of rail with Foam Retaining Rod

49. Installation of the “PrisMAX SL” New Trim Kits

50. Installed “PrisMAX SL” Trim Kits

52. Installation of the “PrisMAX SL” Install first 10’-0” Lowside Unit for “multi-unit” systems

53. Installed “PrisMAX SL”

56. “PrisMAX SL”