1. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Topics Testability and architecture. Design methodologies. Multiprocessor system-on-chip.

2. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Architecture testing Want to make system as testable as possible with minimum cost in hardware, testing time. Can use knowledge of architecture to help choose testability points. May want to modify architecture to improve testability.

3. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Some scan latches are more useful than others Acyclic register-transfer graphs are easy to test. Register-transfers with feedback are harder to test—state becomes contaminated during test. When choosing partial scan registers, choose feedback paths first.

4. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Identifying partial scan opportunities Construct register graph, which shows connections between registers: –nodes are registers; –edge between two nodes if there is a combinational path between them. Sequential depth is distance from primary input to a node.

5. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Register graph example machine register graph

6. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Analyzing register graphs High sequential depth implies that the register is harder to test. Registers contained register-graph cycles (FF2-FF3) are hard to test (although self- loops are not hard). Add partial scan registers to effectively reduce sequential depth of node and its neighbors.

7. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Built-in self test (BIST) Includes on-chip machine responsible for: –generating tests; –evaluating correctness of tests. Allows many tests to be applied. Can’t afford large memory for test results—rely on compression and statistical analysis.

8. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Generating vectors Use a linear-feedback shift register to generate a pseudo-random sequence of bit vectors:

9. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf BIST architecutre One LFSR to generates test sequence. Another LFSR captures/compresses results. Can store a small number of signatures which contain expected compressed result for valid system.

10. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Design methodologies Every company has its own design methodology. Methodology depends on: –size of chip; –design time constraints; –cost/performance; –available tools.

11. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Generic design flow architectural simulation floorplan register-transfer design logic design circuit design layout functional/ performance verification testability detailed specs tapeout

12. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Specification and planning Driven by contradictory impulses: –customer-centric concerns about cost, performance, etc.; –forecasts of feasibility of cost and performance. Features, performance, power, etc. may be negotiated at early stages; negotiation at later stages creates problems.

13. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Estimation and planning Estimation techniques vary with module: –memories may be generated once size is known; –data paths may be estimated from previous design; –controllers are hard to estimate without details. Estimates must include speed, area, power.

14. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Floorplanning and budgeting The purpose of early floorplanning is to establish budgets for each major component: area, delay, power, etc. The project leader must ensure that budgets are met at all times. If it becomes clear that meeting a budget for a component is impossible, the floorplan must be redone ASAP.

15. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Logic design For controllers, good state assignment is usually requires CAD tools. Logic synthesis is an option: –very good for non-critical logic; –can work well for speed-critical logic. Logic synthesis system may be sensitive to changes in the input specification.

16. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Circuit/layout design Tasks: –size transistors; –draw layout. Alternative design styles: –full custom logic (very tedious); –standard cell. Full custom most likely for datapaths, least likely for random logic off critical path.

17. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Design validation Must verify: –layout (design rule check = DRC); –circuit performance; –clock distribution; –functionality; –power consumption / power bussing.

18. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Testing Automatic test pattern generation = ATPG. Must verify that circuit can be tested, generate a compact set of manufacturing test vectors. Test vectors often comprised of vectors taken from simulation + ATPG-generated vectors.

19. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Tapeout Tapeout: generating final files for masks. Shipped to mask-making house. Pre-tapeout verification is importance since it will take months to get results from fab. Tapeout party follows. Size of party depends on importance of chip design project.

20. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Multiprocessor systems-on-chips System-on-chip is a complete integrated system. MPSoC has more than one processing element: –CPU. –DSP. –Hardwired accelerator.

21. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Styles of MPSoC Homogeneous, as in multicore. Heterogeneous: –Several different types of processing elements. –Non-uniform memory system, with different PEs accessing different parts of memory. –Non-uniform interconnect structure.

22. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf MPSoCs and IP MPSoCs require a lot of IP: –Processing elements. –Memories. –Networks-on-chip. –I/O devices.

23. Modern VLSI Design 4e: Chapter 8 Copyright  2008 Wayne Wolf Trimedia TM-1300 architecture