Presentation is loading. Please wait.

Presentation is loading. Please wait.

HEALTH AND SAFETY Including Manual Handling RCHT Induction CMP/FS/CIEH/MAY2007.

Similar presentations


Presentation on theme: "HEALTH AND SAFETY Including Manual Handling RCHT Induction CMP/FS/CIEH/MAY2007."— Presentation transcript:

1 HEALTH AND SAFETY Including Manual Handling RCHT Induction CMP/FS/CIEH/MAY2007

2 Aims & Objectives By the end of this session you will be able to: Identify some of the legislation Define terms such as ‘Accident’ & ‘Hazard’ Understand your responsibilities for H&S Understand the principles of risk assessment Identify possible risk reduction measures Understand good health and safety culture

3 Legislation The Health and Safety At Work Act 1974 It shall be the duty of every employer to ensure, so far as is reasonably practicable…... The health, safety and welfare, of all his employees whilst they are at work”

4 H&S Umbrella Environment Safe Systems Competent Person Equipment Welfare Security

5 Reporting Datix Riddor 1995

6 RIDDOR Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 In the event of suspected contact dermatitis the employee must advise the line manager, Occupational Health and record on the Datix Incident Reporting System. The Occupational Health Department will inform the Health and Safety Manager where a diagnosed condition may require reporting to the HSE under RIDDOR Medical confidentiality will be maintained at all times, within the statutory obligations of the Trust.

7 General duties of EMPLOYEES: Section 7 of HASAWA 1974 Take reasonable care to avoid injury to themselves and others. Cooperate with employers Not to interfere with, or misuse, provisions for Health & Safety

8 WHAT IS HEALTH & SAFETY? A condition free from risk of injury or threat to our health and well being within the work place.

9 WHAT IS A HAZARD? Something with the potential to cause harm…

10 What is a risk? An estimate of the likelihood that the hazard or threat will arise & actually cause harm or damage

11 SAFETY It’s everyone’s responsibility ….the result of EVERYONE at work taking positive actions to identify accident causes and implement suitable preventative measures

12

13

14

15

16

17 The cost of neglecting Health & Safety? Organisational? Personal / Professional?

18 Risk Assessment Identify hazards Evaluate risks Who is harmed?How? Current controls adequate More needed Record findings Review REVISE

19 Lone Worker

20

21 Manual Handling

22 The transporting or supporting of loads by hand or bodily FORCE MHOR 1992

23 Under Manual Handling Operation Regs 1992 Avoidance of manual handling Risk assess Reduction of risk Review of risk assessments Provision of information of the load

24 L ifting O perations and L ifting E quipment R egulations Load Management Legislation

25 LOLER 1998 Strong and stable enough for the particular use Marked to indicate safe working loads Positioned and installed to minimise any risks Used safely Subject to on-going examination / inspection

26 Load Management Legislation Provision and Use of Work Equipment Regulations 1998

27 PUWER 1998 Suitable for intended use Safe for use Maintained in a safe condition Inspected to ensure this remains the case Used by those who have received adequate information, instruction and training Accompanied by suitable safety measures

28 Under Management of H & S at W Regulations 1999 EMPLOYER’S RESPONSIBILITIES

29 Functions of the Spine 1.Muscle attachment 2.Shock absorber for the brain 3.Protection of the spinal cord and nerves 4.Connection for the parts of the skeleton 5.Support of the erect posture

30

31 PROLAPSED DISC

32 Causes of muscular-skeletal injuries Ageing Direct trauma Psychological/ Physiological attitudes Chemical/ Biological factors Congenital defects RSI & Cumulative strain The Injury Complex

33 Habits?

34 Principles of Safe Manual Handling 1.Never manually handle unless there is no other option 2.Know your own handling capacity 3.Wear suitable footwear and clothing 4.Assess the object to be handled commencing the manoeuvre 5.When working as part of a team to move an object, ensure everyone understands what they are about to do and when

35 6.Prepare the handling area 7.Make a good stable base with your legs and feet. Work well-within your ‘circle of balance’ 8.Keep the object to be transferred as close to your body as possible 9.Make sure of a good handhold Principles (cont.)

36 Self Help ….. Correct posture in any physical activity.. Correct sitting posture

37 An example of biomechanics at work

38 Team work..

39 Think BACK for the FUTURE

40 Thank you


Download ppt "HEALTH AND SAFETY Including Manual Handling RCHT Induction CMP/FS/CIEH/MAY2007."

Similar presentations


Ads by Google