1. International Backflow Perspective Australian Backflow Association Gary Ashwood 31 July, 2015

2. Introduction Backflow Prevention Assemblies/Devices are used throughout the world to protect the drinking water supply. But because they tend to be seen as a relatively high-end priority, the degree of installations, programs, enforcement, certifications, and testing varies greatly.

3. Topics United States South America Europe China Middle East and Israel Common Themes Zurn Wilkins Strategy

4. United States Issues: – Lack of awareness – Backflow seen as a cost – rather than a risk – Lack of program/testing uniformity – System complexity – reclaim, grey, etc

5. United States Takeaway – for the first time, actual data has been generated and observed that proves backflow occurs regularly in a water system. Backflow of water from residences into distribution systems is probably more widespread than currently thought and is thus a potential public health concern for the water industry. Analysis of the data from backflow sensing water meters has shown that backflow events occurred at a rate of 1.6% of residential services each month, with 5% of homes registering a backflow each year.

6. United States Opportunities: – On Line Testing Management – Backflow Theft Web Site – Education – teach the tester how to educate the business and home owner

7. South America Issues: – Rarely used – Some reliance on Air Gaps to protect potable water supplies – Limited use of more sophisticated valves on fire protection systems

8. Europe Standards: 1.For each country in the European Union, backflow preventers must be certified to at least two standards: EN12729-2002 (European Norm) Various national certification requirements which differ from country to country 2.Prior to the publication of the European Norm in 2002, certification was required to each country and to separate performance standards

9. Europe Enforcement: – Varies greatly from country to country as well as by size of the water authority – Mandatory enforcement across entire countries is rare – Generally, enforcement is weak Initial and Annual testing: – Again varies from country to country – Some areas of France require field testing 2 times per year – Italy – no field testing required – United Kingdom – annual testing required

10. European backflow preventers

11. China Standards – ambitious goals set 4-5 years ago: 1. National Standard PRC: – GB 50015-2003 Code for design of building water supply and drainage requires that all cross connections must have backflow preventer installed. – GB/T25178-2010 Reduced-Pressure Principle Backflow Prevention Assembly published at the end of 2010 2. China Association for Engineering Construction Standardization – CECS 184:2005 Technical specification for prevention of backflow pollution in water supply system 3. China Institute of Building Standard Design& Research – 05S108 Installation of Backflow Preventers

12. China Enforcement: – There is a national standard requiring backflow on all commercial pressurized systems, as well as a performance standard for Reduced Pressure Principle Backflow Preventers – However enforcement is up to the local authority and inconsistent at best Other Issues: – Initial and Annual testing is virtually non-existent – Low street water pressure issues – Valves that are installed may not actually work

13. Chinese backflow preventers

14. Israel Standards: – Products tested per the Standards Institute of Israel – Performance standard is similar to US standards (ASSE) – Each model and size must be submitted for testing – Approval granted by the Ministry of Health

15. Israel Enforcement: – Generally strong enforcement concerning drinking water and fire protection applications – Enforced on a regional level (by city) Initial and Annual testing: – All backflow must be tested after initial installation as well as annually

16. Israeli backflow preventers

17. Middle East (excl. Israel) No “local” certification except for fire protection in certain countries Primarily follow US Standards – specs may include ASSE, USC, UL, FM All major projects (airports, high-rise, etc) include backflow – although contractors may try to eliminate or downsize to reduce costs Enforcement - none Initial and Annual testing – none

18. Common Market Themes High cost of programs vs. the perceived benefit Pressure loss is an issue in many regions Freeze protection Corrosion resistance Theft prevention Internal protection Space limitations Ease of installation

19. Zurn Wilkins Strategy Low cost maintenance (LCA) Focus on opening flow curves Ease of maintenance/winterization Stainless steel and composites Reduced footprint and vertical designs Retrofit solutions Push fit and press fit connections

20. Product Innovation Challenge - Backflow Theft Solution - Camouflage

21. Product Innovation Challenge – Corrosion Resistance Solution – Stainless Steel Backflow

22. Product Innovation Challenge – High Life Cycle Costs Solution – Simple designs and fewer parts to reduce costs Relief Valve parts from 23 to 22 to 13 parts over three generations

23. Summary North America, Australia, New Zealand, and Israel lead the world in standards and enforcement We need to continue to promote the need for backflow prevention outside our boarders Protecting drinking water is a worldwide concern, especially in underdeveloped countries Cost reduction and technology are vital Education is the key