1. L. Greiner1IPHC-LBNL Phone Conference 05/2011 STAR IPHC-LBNL Phone Conference News and PXL sensor (Ultimate) testing at LBNL

2. L. Greiner2IPHC-LBNL Phone Conference 05/2011 STAR PXL Project News Preparation for CD-2/3 review at BNL in July Primarily a cost and schedule review but with some technical content. Releases construction funding. A set of documentation for the PXL detector is available at http://rnc.lbl.gov/hft/hardware/docs/sensor_review/summary_v2.doc http://rnc.lbl.gov/hft/hardware/docs/sensor_review/summary_v2.doc New Virtex-6 based RDO system boards design. Design in progress 3 PCB architecture, new connectors, cables, 9U VME physical format. Details at http://rnc.lbl.gov/hft/hardware/docs/ultimate/V6_RDO_MB_design_plan s_hw_meeting.pptx http://rnc.lbl.gov/hft/hardware/docs/ultimate/V6_RDO_MB_design_plan s_hw_meeting.pptx Expected to be completed and ready to test in July. Significant Progress in mechanical structures. See pictures next slide

3. L. Greiner3IPHC-LBNL Phone Conference 05/2011 STAR PXL Mechanical Construction http://rnc.lbl.gov/hft/hardware/docs/ultimate/HFT_Mechanics_20110428.pptx

4. L. Greiner4IPHC-LBNL Phone Conference 05/2011 STAR Ultimate Sensor Testing 5 Sensors mounted to individual test boards. 2 loaded with digital outputs only. 3 loaded with digital outputs + analog output buffering.

5. L. Greiner5IPHC-LBNL Phone Conference 05/2011 STAR Ultimate Sensor Testing Testing plan 1.Power-on tests 2.Functional testing 3.Characterization Status We have done power on testing and are beginning functional testing. More on this on the next slide. JTAG is working and we can configure all registers. More to come.

6. L. Greiner6IPHC-LBNL Phone Conference 05/2011 STAR Power-on observations Ultimate un-configured current draw. VDDA ~ 360 mA (E-4), 370 mA (A-2) After RSTB => GND. VDDA ~ 0 mA Power on sequence dependent: (RSTB tied to VDDA) Sequence: pwr-on VDDA ~ 490 mA, pwr-on VDDD ~ 620 mA This is a surprise since Phase-1 did not exhibit this behavior. Previous agreement to tie RSTB to VDDD to eliminate the need for this trace on the crowded readout cable. This current draw is not immediately compatible with the current plan for no startup sequence LU protected power supplies for the ladder.

7. L. Greiner7IPHC-LBNL Phone Conference 05/2011 STAR Quick architecture review Ladder x 4 FPGA LU prot. power MTB x 1 Power Supplies Control PCs Trigger DAQ RDO PCs SIUADCUSBi/o RDO board x 1 Sensor testing Probe testing SRAM Black – cfg, ctl, clk. path Blue – data path Red – power / gnd path Green – testing path fiber Unified Development Platform

8. L. Greiner8IPHC-LBNL Phone Conference 05/2011 STAR Power-on current draw 2 possible solutions with many variants: RSTB Bus on cable: –Control from FPGA – startup sequence control –RC timer circuit on cable (or MTB) – no startup sequence control required –RSTB a “known sensitive” line? RSTB pad bonded to (any) power bus: –Bonded to VCCA – startup sequence control required. Activate or reset LU-PS Note that either is inherently safe as the LU protection limits current available to the sensors.

9. L. Greiner9IPHC-LBNL Phone Conference 05/2011 STAR Summary For LBNL the testing of the PXL sensor has just begun and we will be moving to functional testing next. Power-on high current draw can be solved in a variety of ways – we will select one and incorporate it into the design. We are very interested in knowing if there are any known operational issues, variations from the manual, or hints for operation that IPHC has already discovered. This will help a lot with our testing.