1. Cypress-Fairbanks I.S.D. 04/04/05 1 QUICK PAD PRO TRAINING MODULE

2. Cypress-Fairbanks I.S.D. 04/04/05 2 QUICK PAD PRO Reset On/Off Send File Spell Check Menu Esc Fn

3. Cypress-Fairbanks I.S.D. 04/04/05 3 QUICK PAD PRO Infrared Port USB Port

4. Cypress-Fairbanks I.S.D. 04/04/05 4 QUICK PAD PRO Battery Compartment 4 Rechargeable or AA Bottom Side

5. Cypress-Fairbanks I.S.D. 04/04/05 5 Setting Up the Device Turn on the device Press F7 to access the setup menu

6. Cypress-Fairbanks I.S.D. 04/04/05 6 MAIN MENU Word Processor F1 Setup F7 F1 F7

7. Cypress-Fairbanks I.S.D. 04/04/05 7 Initial Setup Select F7 for Setup Options Setting the Date : MM/DD/YY and Enter Setting the Time : HH/MM and A for AM or P for PM and Enter

8. Cypress-Fairbanks I.S.D. 04/04/05 8 Initial Setup Setting the IR Speed : Set at 8 for best results Select F8 for other setup options Setting the Idle Out Time: in minutes up to 75

9. Cypress-Fairbanks I.S.D. 04/04/05 9 Initial Setup Sticky Keys : The use of the SHIFT and CTRL keys. When enabled you can press SHIFT and release, and the next letter you press will be capitalized and then returns to lower case.

10. Cypress-Fairbanks I.S.D. 04/04/05 10 Initial Setup Set Key Speed : Key Delay: refers to the response sped from when you type a key to when it appears on the screen. 1 being the fastest and 4 being the slowest. Key Repeat: refers to the speed of repetition when you hold down a key. 1 being the fastest and 32 being the slowest.

11. Cypress-Fairbanks I.S.D. 04/04/05 11 Create a New File Press the “N” key at the main word processor menu Enter a file name when prompted Press ENTER and you are ready to begin

12. Cypress-Fairbanks I.S.D. 04/04/05 12 Edit an Existing File Select the file name from the box on the left side of the screen using the arrow keys Highlight the correct file Press ENTER to open the saved document

13. Cypress-Fairbanks I.S.D. 04/04/05 13 Save and Exit When finished with a document press “ESC” Save file under the current file name by pressing “Y” Save file under a new name by pressing “F” Exit program without saving changes by pressing “N”

14. Cypress-Fairbanks I.S.D. 04/04/05 14 Spell Check Spell Check key is located at the bottom left of the keyboard Misspelled words will appear in the top box Suggestions will appear in the bottom box Use QuickKEYS commands to edit and select words

15. Cypress-Fairbanks I.S.D. 04/04/05 15 Printing Methods Printing with an IR Pod: most common method Printing with USB Cables: alternate method

16. Cypress-Fairbanks I.S.D. 04/04/05 16 Printing with IR Pod Connect the thin rectangular end into the back of the computer Connect the square- shaped end to the back of the IR Pod

17. Cypress-Fairbanks I.S.D. 04/04/05 17 Printing with IR Pod Highlight the desired file on the device Open a word processing program on the computer Place the cursor where you wish the file to be inserted on the computer File names

18. Cypress-Fairbanks I.S.D. 04/04/05 18 Printing with IR Pod Place the device on a steady surface Point the IR area on the back of the device towards the IR Pod that is connected to the computer Do not move the device while data transfer is taking place otherwise data will be lost

19. Cypress-Fairbanks I.S.D. 04/04/05 19 Printing with IR Pod Press “Send File” key located in the upper right hand corner of the keyboard You should see the text appear in the word processing document Text that appears Send File

20. Cypress-Fairbanks I.S.D. 04/04/05 20 Printing with USB Cables Turn the QuickPad on Connect the thin rectangular end into the computer Connect the square-shaped end into the back of the QuickPad

21. Cypress-Fairbanks I.S.D. 04/04/05 21 Printing with USB Cables Highlight the desired file on the device Open a word processing program on the computer Place the cursor where you wish the file to be inserted on the computer File names

22. Cypress-Fairbanks I.S.D. 04/04/05 22 Printing with USB Cables Press “Send File” key located in the upper right hand corner of the keyboard You should see the text appear in the word processing document Text that appears Send File

23. Cypress-Fairbanks I.S.D. 04/04/05 23 Additional Information Screen Contrast: Press the “Fn” key and the up/down arrow keys Enlarge Font: Press the “Menu” key to change from 12 point font to 18 point font Fn Menu

24. Cypress-Fairbanks I.S.D. 04/04/05 24 Additional Information 500 pages and100 hours of power 16 lines per screen or 8 lines per screen

25. Cypress-Fairbanks I.S.D. 04/04/05 25 QuickKEYS General Commands: F1: Help Esc: Opens the save and exit screen CTRL-S: Save file without exiting ALT-F: Opens the file menu

26. Cypress-Fairbanks I.S.D. 04/04/05 26 QuickKEYS Editing Commands CTRL-C: Copy selected text CTRL-X: Cut selected text CTRL-V: Paste selected text

27. Cypress-Fairbanks I.S.D. 04/04/05 27 QuickKEYS Editing Commands CTRL-F: Find a text string Delete: Delete character at cursor Backspace: Delete character before the cursor

28. Cypress-Fairbanks I.S.D. 04/04/05 28 QuickKEYS Editing Commands Up/down arrow: Move cursor to pervious/next line Left/right arrow: Move cursor to previous/next character

29. Cypress-Fairbanks I.S.D. 04/04/05 29 QuickKEYS Editing Commands [PgUp]: Move cursor to previous page [PgDn]: Move cursor to next page [Home]: Move cursor to beginning of line

30. Cypress-Fairbanks I.S.D. 04/04/05 30 QuickKEYS Editing Commands [End]: Move cursor to end of line [CTRL-Home]: Move cursor to beginning of file [CTRL-End]: Move cursor to end of file

31. Cypress-Fairbanks I.S.D. 04/04/05 31 QuickKEYS Spell Check Commands [Spell Check]: Begin spell check [N]: Edit the misspelled word [S]: Choose a word from the list of selections

32. Cypress-Fairbanks I.S.D. 04/04/05 32 QuickKEYS Spell Check Commands [I]: Ignore and continue spell check [A]: Accept a suggestion [C] or [Esc]: Exit spell check

33. Cypress-Fairbanks I.S.D. 04/04/05 33 Select Text Hold down the SHIFT key while pressing an arrow key Left/Right arrows: select one letter at a time Up/Down arrows: select full lines Editing Commands: allow you to cut, copy or paste

34. Cypress-Fairbanks I.S.D. 04/04/05 34 Cut, Copy and Paste Copy & Paste: highlight the text and press CTRL – C Paste: move cursor to the appropriate area and press CTRL – V Cut: highlight the text and press CTRL – X