1. بِســــــمِ اللهِ الرَّحمَنِ الرَّحِيمِ لَا يُكَلّفُ اللهُ نَفساً إِلَّا وُسعَهَا صَدَقَ اللهُ العليُ العظيم

2. SECOND YEAR SUB. RESISTANCE OF MATERIALS MSc. Ashraf A. M. R. Hiswa 2013 UNIVERSITY OF KUFA FACULTY OF ENGINEERING CIVIL DEPARTMENT

3. Outlines  Stress Concept  Types of Stresses  Applications on Stress  Design of Materials Due to Stress Capacities

4. Stress Concept Stress is the distribution of a force throughout the cross-sectional area of a structural member

5. Types of Stresses

7. Applications on Stress

8. Types of Stresses

10. Applications on Stress

11. Design of Materials Due to Stress Capacities

12. Applications on Stress Ex. 3/ the frame below was supposed by an engineer to support the distributed load (w=20 kN/m) over the carrier which is supported by cable from one side and a platform from the other side, calculate the cable diameter, the carrier height (h) and the required distance from the carrier to be supported by the platform (x) if you know that tension capacity of the cable is (400 MPa.) and the compression and shear resistance of the carrier are (400 MPa.), (200MPa.) respectively.

13. Applications on Stress

14. References  Megson, T. H. G. (1996). STRUCTURAL AND STRESS ANALYSIS. Oxford: Butterworth-Heinemann.  Saad, M. H. (2005). ELASTICITY Theory, Applications, and Numerics. Oxford: Butterworth-Heinemann.  Hosford, W. F. (2005). Mechanical Behavior of Materials. New York: Cambridge University Press.