1. Fill in info under general tab, click save, then go to the Sub types tab

2. Accident (spill) or process leak (inc. pinholes) from pipeline/ flowline into drip tray or bund MOST COMMON Accident (spill) or process leak (inc. pinholes) from pipeline/ flowline onto surrounding land Other environmental issue, call MSE/421 Discharging under permit but permit limit exceeded Incorrect moving/ shipping of waste, liquid effluent etc Incorrect dumping of waste EXPLANATION OF SUB TYPES

3. Ensure Incident Owner is completed, check spelling and MU number correct, then go to Consequence tab

4. Click on ‘recommended’ in pending consequences – this has come from the sub type box you checked

5. Select type of leak/spill from the pull down menu Tick cause of leak/spill Click on each tab, fill in relevant info, then click save Add any other info here Spills non-reportable unless > 1.2m3. If >1.2m3, contact MSE/421

6. Click on the plus sign to add data

7. Select material spilled from pull down menu and complete relevant fields Second material can be added by clicking on the plus sign Leave this blank unless spill of oil is >1.2m3 (contact MSE/421) Check correct units used, try and use m3 Add details if spill/ leak contained in drip tray or bund Add details if spill/ leak recovered KEEP SAVING DATA