1. 2015 SAE Aero East Design Team 2015 SAE Aero Design East Team Mid-Term Status Report (3/5/2015)

2. 2015 SAE Aero East Design Team SAE Aero East 2015 Team 2 Project Advisor Dr. Drew Landman Team Members Andrew Tonkovic Chris Thurman Greg Shively Kevin Rhamy Lucas Mills Mason Hunerkoch Michael Lauruska Ryan Laporte Sara Mendelsohn William Fisher Team Leader Jeremy Newman

3. 2015 SAE Aero East Design Team Overview Project Schedule Competition Objectives Design Summary Analysis Manufacturing Results & Discussion Project Budget Recent Work Future Work 3

4. 2015 SAE Aero East Design Team Project Schedule 4

5. 2015 SAE Aero East Design Team Competition Objectives Overall length, height and span of the aircraft cannot exceed 175 inches The maximum weight cannot exceed 55 pounds The use of fiber-reinforced plastic is prohibited Payload bay dimensions of 10” x 4” x 4” Unload and reload payload in one minute 1000 watt power limiter Take off in 200 feet, fly a 360 degree circuit, and land in 400 feet 5

6. 2015 SAE Aero East Design Team Design Summary 6

7. 2015 SAE Aero East Design Team Design Summary Utilized Modified Pratt Truss to minimize weight Optimize cargo weight capacity Produce high lift coefficient Maximize ground effect 7

8. 2015 SAE Aero East Design Team Analysis Eppler 423 Airfoil Drag vs. Angle of Attack Lift vs. Angle of Attack 8

9. 2015 SAE Aero East Design Team Analysis Motor mount vibration Propeller evaluation – eCalc for motor/prop matching – Thrust vs. Freestream velocity 9

10. 2015 SAE Aero East Design Team Structural analysis – Von Mises Stress =1.43 ksi – Max. vert. displacement = 0.017 inches Payload prediction – Up to 29.5 lbf 10 Analysis

11. 2015 SAE Aero East Design Team Manufacturing 11

12. 2015 SAE Aero East Design Team Manufacturing 12

13. 2015 SAE Aero East Design Team Manufacturing 13

14. 2015 SAE Aero East Design Team Results and Discussion 14 Weight (lbf): 2.406 Span (in): 94 Chord (in): 17 Planform area (in 2 ): 1598 2015 Wing Weight (lbf): 2.750 Span (in): 84 Chord (in): 15 Planform area (in 2 ): 1260 2014 Wing

15. 2015 SAE Aero East Design Team Initial Test Flight Vibrations induced by the motor did not excite natural frequencies of the motor mount Triple tail tested successfully Distance between tail and wing section tested successfully Secondary Test Flight Rudder control surface proved insufficient Telemetry unit collected flight data Adequate Take-off distance (< 200ft) Sustained flight in high wind conditions (10 -15 mph) Tertiary Test Flight 18 lbf payload lifted Results and Discussion 15

16. 2015 SAE Aero East Design Team Results and Discussion 16 Take-Off Speed ≈ 16 mph Max. Speed ≈ 46 mph Max. Elevation ≈ 276 ft Predicted: 18.4 mph @ 7lbf payload

17. 2015 SAE Aero East Design Team 17 Project Budget Parts Cost – Budgeted Parts Cost = $1995.23 – Actual parts cost ≈ $1600 – Able to reuse some parts and materials from 2014 project Travel Cost – Available Travel Budget: $4500 – Projected Travel Costs: Renting vehicles: ≈ $900 Gas Estimate: ≈ $600 Hotel reservations: ≈ $1200 Meals & Incidentals: ≈ $1400 Total: ≈ $ 4100

18. 2015 SAE Aero East Design Team Recent Work 18 New Payload Box: – Steel and Aero Ply Construction – Steel section to act as ballast Modified Verticals, Elevators, and Rudders – Increase in control surface area – Increased structural integrity – Counter-balanced rudder design

19. 2015 SAE Aero East Design Team Future Work 19 Test flight(s) final aircraft Flight data collection Competition logistics Competition PowerPoint Document: – Competition results – Lessons learned

20. 2015 SAE Aero East Design Team Questions?