1. Sensor (0,0) (20235, 22725) PXL Ultimate sensor Diced Silicon Size 20.240mm x 22.730mm There is a uniform 15 um border around the sensor lithography 15 um (-15, -15) Dimensions are microns

3. Optical fiducial point locations are shown on the next pages

4. Right sideLeft side

5. Right Side

6. This corner X= 18165.075 µm Y= 871.6 µm

7. Left Side

8. This corner X= 4594.225 µm Y= 920.775 µm

9. Cable sizes and locations of sensors

10. Ladder end detail 3.1 mm Sensors are aligned to the upper edge of the cable

11. 214.48 mm 1 mm gap Low mass sensor section Driver section 91.02 mm Total length = 306.5 mm Width = 24.43 mm

13. Gap detail 10 um

14. More background material

15. CC - IPHC 8th March 2011 - ULTIMATE ULTIMATE Run SA35C11_1 # 12404 X (mm)Y (mm) Chip Size20,24022,730 Step Size20,34023,530 Scribeline0,1000,800 Possible Dies 48

16. CC - IPHC 8th March 2011 - ULTIMATE Traceability – Chip Numbering

17. CC - IPHC 8th March 2011 - ULTIMATE X (mm)Y (mm) Chip Size20,24022,730 Step Size20,34023,530 Scribeline0,1000,800 Possible Dies 48 Sawing Diagram