1. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. BAE Systems C2C SWAT Project - WF32 Shield V2.0 Only Installation Guide V2 Sep 2015

2. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. This Installation Guide describes how to install the SWAT Controller required to operate the Blackbox. 2 Scope

3. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. To access the latest software, go to: https://www.flinderssc.com/public/SWAT.html 3 Installation > Step 1

4. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 2 4 Select the XNA Framework and save it to your local directory.

5. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Note for Firefox users 5 If you are using Internet Explorer, please proceed to the next slide. If you are using Firefox to download the XNA Framework, before running the file, open the folder where the file was saved and remove the “.txt” from the file extension. When warned about changing the file extension, select Yes.

6. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Once the file has completed downloading, as an administrator, you may Run it from the popup, shown below on the website. 6 Installation > Step 3 Or, as an administrator, access it through the local directory, where you saved the file. Double click on the file and select Run once prompted.

7. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. The Setup Wizard will appear. Select Next to continue. 7 Installation > Step 4

8. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Accept the terms in the License Agreement by ticking the checkbox. Select Next to continue. 8 Installation > Step 5

9. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Select Install to continue. 9 Installation > Step 6

10. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. The Setup Wizard will begin installing. If you are using Windows 7, you may have to click allow in User Account Control before the installation will start. 10 Installation > Step 7

11. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Once the Setup Wizard is complete, select Finish. 11 Installation > Step 8

12. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Go back to: https://www.flinderssc.com/public/SWAT.html 12 Installation > Step 9

13. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 10 13 Select the PC Blackbox Installer Only v1.0.0.8 and save it to the same local directory as the XNA Framework.

14. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 11 14 Go to your local directory, where you have saved the two files. Right click on the SWAT_Controller_Installer_1.0.0.8.zip and Extract to here.

15. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 12 15 As an administrator, double click on the setup.exe file and select Run once prompted.

16. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 13 16 The Setup Wizard will appear. Select Next to continue.

17. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 14 17 Select Next to continue.

18. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 15 18 Select Next to continue.

19. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 16 19 The Setup Wizard will begin installing. If you are using Windows 7, you may have to click allow in User Account Control before the installation will start.

20. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 17 20 Once the Setup Wizard is complete, select Close.

21. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 18 21 Connect the TP-LINK wireless range extender to a power source. Disconnect the computer from all existing Ethernet and wireless networks.

22. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. If connecting via Ethernet, connect the wireless range extender to the computer using an Ethernet cable. If connecting via Wi-Fi, join the wireless network ASYNCLABS. It is an unsecured network so it should not ask for a password. Installation > Step 19 22

23. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 20 23 When asked to set up the network click Connect to the network without setting it up.

24. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Step 21 24 Select Public Network as the network location, then click close.

25. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Note 25 A yellow exclamation mark will remain over the network symbol in the taskbar, this is normal.

26. BAE SYSTEMS PROPRIETARY – Internal Use Only Unpublished Work Copyright 2014 BAE Systems. All rights reserved. Installation > Completion 26 The SWAT Controller is now installed on your computer. Please continue to Test and Diagnostics.pptx