1. 【5-Axes Gantry Type Machining Centers】
U800-5AX
【5-Axes Gantry Type Machining Centers】
Edit: Andy
2015/02/27

2. Directory Market Positioning Comparison with Competitors Specification
Configuration Analysis
Design Features

3. Technical Parameter(1)
4+1 Axis Entry-Level/ Full 5 Axes Mid-Range Level
A/C Axes Cradle Type
X/Y/Z 3 Axes Overlap, gantry Structure.
Z-axis
X-axis
Y-axis
C-axis
A-axis

4. Technical Parameter(2)
A-axis:0°
A-axis:+120°
A-axis:-120°

5. Technical Parameter(3)
(Max Machining Area)

6. Design Features(1)
(FEM) Feeler design machine use FEM analysis software. The whole construction, rigidity and module analysis. To make sure the machine reach best construction, price/performance ratio and reliability.

7. Design Features(2) A2 ● Lifting point (A) ● Holes for folk lift (B) A1C2 C1 圖A 圖B

8. Design Features(2)
Improved
Original

9. Design Features(3)
● Spindle (STD) Standard module 12Krpm ↑， Built-in type 18Krpm(OPT) 2 1

10. Design Features(4) Y Axis Dual Driving Feeding System
Gantry Type Structure High Rigidity and Fast Feed for
U-Shaped structure
Allow bigger Rotary Table

11. Design Features(5)
Central and large chip exhausting hole. High efficiency for removing chip.

12. Design Features(5)
● ATC Flat Mounted Number of Tool can be expanded. Lighter and Simpler – Easier to Maintenance Servo Changing Tool
Tool No.: 1 magazine is 32 tools
2 magazines are 64 tools

13. Design Features(6)
● A/C Axis Built-In Dual-Driven titling rotatory table(LCM) High Torque/High Speed
Red :+120
Blue :-120

14. 45 degree
90 degree

15. Exterior(1)
●Shipment : Flat rack container is required
貨櫃規格區分說明

16. APPEARANCE

17. Thank you !