1. Section 17.2 Position, Velocity, and Acceleration

2. Position The “position vector” of an object is defined by the vector valued function (where t is time) For example This gives us a path that is a cylindrical helix with a radius of 10 and 2 windings up around the z-axis Our position vector is measured in whatever units each component is measured in –For our example we will use feet

3. Instantaneous Velocity If is a position vector, than the velocity vector is defined to be So for our previous example we have Note: Instantaneous speed is given by The velocity vector is tangent to the object’s path What is the speed for the above helix?

4. Acceleration The acceleration vector is given by The magnitude of the acceleration vector gives us the magnitude of the net force acting on an object

5. Uniform Circular Motion When an object travels in a circular path with a constant speed we call it uniform circular motion Its motion can be described by Motion is in a circle of radius R with period 2π/ω Velocity vector is tangent to circle and speed is constant with Acceleration vector points toward center of circle with Let’s take a look at our above function with Maple

6. Uniform Straight Line Motion What do we need in order to ensure we have straight line motion? For a particle whose motion is described by Motion is along a straight line through the point with position vector parallel to Both the velocity and acceleration vectors are parallel to the line Let’s take a look at #14 with Maple

7. Length of a Curve Now we know that the speed of an object is Then just as in one dimension we can find the distance traveled (i.e. length of path or curve) by integrating its speed