1. Electric Forces and Fields Chapter 16

2. Electrical Field Maxwell developed an approach to discussing fields An electric field is said to exist in the region of space around a charged object – When another charged object enters this electric field, the field exerts a force on the second charged object

3. Direction of Electric Field The electric field produced by a negative charge is directed toward the charge – A positive test charge would be attracted to the negative source charge

4. Electric Field, cont. A charged particle, with charge Q, produces an electric field in the region of space around it A small test charge, q o, placed in the field, will experience a force See example 15.4 & 5

5. Coulomb’s Law Mathematically, k e is called the Coulomb Constant – k e = 8.99 x 10 9 N m 2 /C 2 Typical charges can be in the µC range – Remember, Coulombs must be used in the equation Remember that force is a vector quantity

6. Electric Field Line Patterns Point charge The lines radiate equally in all directions For a positive source charge, the lines will radiate outward

7. Electric Field Lines, cont. The field lines are related to the field as follows: – The electric field vector, E, is tangent to the electric field lines at each point – The number of lines per unit area through a surface perpendicular to the lines is proportional to the strength of the electric field in a given region

8. Electric Field Line Patterns For a negative source charge, the lines will point inward

9. Electric Field Line Patterns An electric dipole consists of two equal and opposite charges The high density of lines between the charges indicates the strong electric field in this region

10. Electric Field Line Patterns Two equal but like point charges At a great distance from the charges, the field would be approximately that of a single charge of 2q The bulging out of the field lines between the charges indicates the repulsion between the charges The low field lines between the charges indicates a weak field in this region

11. Electric Field Patterns Unequal and unlike charges Note that two lines leave the +2q charge for each line that terminates on -q

13. Electric Field Mathematical Definition, The electric field is a vector quantity The direction of the field is defined to be the direction of the electric force that would be exerted on a small positive test charge placed at that point

14. Chapter 17 Electric Energy and Current

15. Work and Potential Energy For a uniform field between the two plates As the charge moves from A to B, work is done in it W = F d= q E d ΔPE = - W = - q E d – only for a uniform field

16. Summary of Positive Charge Movements and Energy When a positive charge is placed in an electric field – It moves in the direction of the field – It moves from a point of higher potential to a point of lower potential – Its electrical potential energy decreases – Its kinetic energy increases

17. Summary of Negative Charge Movements and Energy When a negative charge is placed in an electric field – It moves opposite to the direction of the field – It moves from a point of lower potential to a point of higher potential – Its electrical potential energy decreases – Its kinetic energy increases

18. Potential Difference ΔPE = - W = - q E d The potential difference between points A and B is defined as: ΔV = V B – V A = ΔPE / q =-Ed Potential difference is not the same as potential energy 1V is defined as 1 J/C 1 Joule of work must be done to move a 1C across 1V potential difference

19. Electric Potential of a Point Charge The point of zero electric potential is taken to be at an infinite distance from the charge The potential created by a point charge q at any distance r from the charge is V is scalar Quantity (superposition applies) A potential exists at some point in space whether or not there is a test charge at that point Ex. 16.4 p.540

20. Potentials and Charged Conductors W = -ΔPE = -q(V B – V A ), – Therefore no work is required to move a charge between two points that are at the same electric potential i.e. W = 0 when V A = V B For two charges separated by r PE = k e q 1 q 2 r Charged Surfaces and Conductors All points on the surface of a charged conductor in electrostatic equilibrium are at the same potential

21. Capacitors with Dielectrics

22. Applications of Capacitors – Camera Flash The flash attachment on a camera uses a capacitor – A battery is used to charge the capacitor – The energy stored in the capacitor is released when the button is pushed to take a picture – The charge is delivered very quickly, illuminating the subject when more light is needed

23. Applications of Capacitors -- Computers Computers use capacitors in many ways – Some keyboards use capacitors at the bases of the keys – When the key is pressed, the capacitor spacing decreases and the capacitance increases – The key is recognized by the change in capacitance

24. Capacitance A capacitor is a device used in a variety of electric circuits—Often for energy storage Units: Farad (F) – 1 F = 1 C / V – A Farad is very large Often will see µF or pF

25. Parallel-Plate Capacitor The capacitance of a device depends on the geometric arrangement of the conductors For a parallel-plate capacitor whose plates are separated by air: Є o is the permittivity of free space; Є o =8.85 x 10 -12 C 2 /Nm 2 d A C o Є 

26. Energy Stored in a Capacitor Energy stored = ½ Q ΔV From the definition of capacitance, this can be rewritten in different forms Q = C  V

27. Electric Current Whenever electric charges of like signs move, an electric current is said to exist The current is the rate at which the charge flows through this surface – charges flowing perpendicularly to a surface of area The SI unit of current is Ampere (A) – 1 A = 1 C/s + + + + +

28. Electric Current, cont The direction of current flow is the direction positive charge would flow – This is known as conventional current flow In a common conductor, such as copper, the current is due to the motion of the negatively charged electrons It is common to refer to a moving charge as a mobile charge carrier – A charge carrier can be positive or negative Current II = ΔQC tS

29. Meters in a Circuit Remember: 1 V = 1J/C

30. Resistance, cont Units of resistance are ohms (Ω) – 1 Ω = 1 V / A Resistance in a circuit arises due to collisions between the electrons carrying the current with the fixed atoms inside the conductor

31. Ohm’s Law Experiments show that for many materials, including most metals, the resistance remains constant over a wide range of applied voltages or currents This statement has become known as Ohm’s Law – ΔV = I R Ohm’s Law is an empirical relationship that is valid only for certain materials – Materials that obey Ohm’s Law are said to be ohmic

32. Ohm’s Law, cont For an ohmic device The resistance is constant over a wide range of voltages The relationship between current and voltage is linear The slope is related to the resistance V slope=R I

33. Electrical Energy and Power, The rate at which the energy is lost is the power From Ohm’s Law, alternate forms of power are EnergyE = PtW-s or kW-Hr

34. Capacitors in Parallel (have the same voltage across them) Q 1 = C 1 ΔV Q 2 = C 2 ΔV Q 1 + Q 2 = Q tot = C 1 ΔV + C 2 ΔV = (C 1 + C 2 )ΔV  for capacitors in parallel C eq = C 1 + C 2 Ex. 16.5 p.512

35. Capacitors in Series (have the same charge on each plate) ΔV = Q C eq ΔV tot = ΔV 1 + ΔV 2 Q = Q 1 + Q 2 C eq C 1 C 2 But Q=Q 1 = Q 2  for capacitors in series 1 = 1 + 1 C eq C 1 C 2 Ex. 16.6 & 7 p. 515 C eq = C 1 C 2 C 1 + C 2

36. Chapter 15 Summary ke is called the Coulomb Constant ke = 8.99 x 109 N m2/C2 εo is the permittivity of free space and equals 8.85 x 10-12 C 2 /Nm 2 Φ E = E A A is perpendicular to E

37. Chapter 16 Summary Q = C  V capacitors in series 1 = 1 + 1.... Ceq C1 C2 capacitors in parallel Ceq= C1+ C2.... C eq = C 1 C 2 C 1 + C 2 or d A C o Є  Єo is the permittivity of free space; Єo =8.85 x 10-12 C2/Nm2 1 F = 1 C / V PE = ke q 1 q 2 r W = -ΔPE = -q(V B – V A )

38. Resistivity The resistance of an ohmic conductor is proportional to its length, L, and inversely proportional to its cross-sectional area, A – ρ is the constant of proportionality and is called the resistivity of the material – See table 17.1