1. Automated DAG PROGRAMMER Option 1 : Licence* 300 €** Option 2 : Licence and Bar Code Reader SetDAG Code required *** 465 €** * All bar code reader that you have must be sent to DAG System for the parameters setting (as possible) ** 30€/year for the SetDag licence *** 1 SetDAG Code per PC - 100€/extra PC SetDAG Code required *** Automated and Secure TIMING SOLUTIONS Already in your kit N°3 N°1 N°2

2. Step 1 : Reading of the DAG by the Bar Code Reader and the DAG PROGRAMMER + TIMING SOLUTIONS

3. Step 2 : Writing of the DAG on the DAG PROG Current Writing Successful Writing DAG PROGRAMMER and the bar code Reader ensure a optimal security for your programmation The bib n°1 (composed by a DAG) is read by the bar code reader and is recorded as the DAG n°1 and so on… TIMING SOLUTIONS

4. DAG PROGRAMMER ELECTRICAL SPECIFICATIONS Operating frequency 13.56 Mhz Decode Capability V6 Power80 mW Trough a port USB Operating Current140 mA Communication parameters Virtual Com PORT 38400,8,n,1 Communication Interfaces USB, keyboard emulation ENVIRONMENTAL SPECIFICATIONS Operating- 4F ° to + 100 °F Storage Temperature- 40 °F to + 150 °F Power Supply OPERATIONAL SPECIFICATIONS Light SourceVisible Laser diode 650 nm Laser Power1.1mW System Interfaces RS232 light pen emulation, keyboard Wedge, stand alone keyboard, USB, laser emulation Autodiscriminated all standard 1D bar code including RSS-14 Decode Capability ELECTRICAL SPECIFICATIONS Input voltage 0.25 V ( 5VDC) Operating Current275 mA typical @ 5VDC ENVIRONMENTAL SPECIFICATIONS - 4°F to 104°F - 40 °F to +140 °F Storage Temperature Operating Power 1.375 W Bar Code Reader TIMING SOLUTIONS