1. Pre-Requisites For Transferring the Data of Consolidated Report of DB-Analyzer (New EXE) Also Called As DB-Analyzer +

2. Pre-Requisites – DB Analyzer + Disable the Anti-Virus / Firewall (Temporarily for this purpose only). The IP Address of the node needs to be configured with Local Server + Broadband (Router) of BSNL / MTNL so that the node should be able to access Local Server as well as Internet connection thru Broadband only. There should not be WAN connectivity to the node OR the node should be out of WAN.

3. Few Slides for you further may be helpful to carry out the task successfully.

4. This is the screenshot of DBAnalyzer executed without Disabling the AntiVirus / Firewall

5. You can see the Status as encircled in Green as soon as u Run DB Analyzer without Disabling the AntiVirus / Firewall

6. The said task will show the status in number upto 199 everytime when u execute the DBA’s Consolidated Report and will flash a message / warning about Firewall / Antivirus and prompts u to press any key. (But, this is NOT CORRECT as the Antivirus is still in Active mode. See at bottom-right-corner). The data would not go to the Central Server.

7. After Disabling the AntiVirus / Firewall, when u run the DBA’s Consolidated Report Option, the first message appears as shown in the screenshot below and prompts you to confirm whether to proceed ahead (Y/N).

8. The progress (number encircled) will continue till it reaches to 199.

9. The message / warning appears as soon as the progress number reaches upto 199 and prompts u to press any Key.

10. FINAL MESSAGE appears as shown below on successful sending the data to Central Server.

11. Additional Guidelines…

14. All The Best