1. PowerLogic® PowerView Software
Power Management Software for Power Meters --- INTERNAL SALES & MKTG USE ONLY ---

2. PowerLogic PowerView Software
Competitively priced at $2850 (list) to drive PowerLogic power meter sales
Ideally suited for new commercial/industrial energy conscious users requiring small initial investment for power monitoring
Availability: July 2007

3. Product Overview Compliments the PowerLogic power meter offer
Easy to use – 3 tab functionality
Setup
Real time displays
Report Builder
Able to install and begin monitoring within 1 hour
PowerLogic system expertise NOT required to sell!!!!

4. Sales Tools Brochure Doc#3000BR0706
Online Flash Demo (or download Flash to PC)
Customer Presentation (Product Launch Workzone or Power Management Tech Library)

5. Supported Devices The list of Supported Devices are:
High Density Meters
Power Meter 710,750
Power Meter 810, 820, 850
ION 6200
Future device type adaptations will be added as Product Evolutions
Maximum number of Devices:
The maximum number of devices for this software application is 32.

6. PowerView Software Product Feature Overview

7. Operation: Setup and Communications to devices
Device Connections
Automatic Detection (Auto discovery of networked devices)
After assigning a valid IP address, the system will poll the connected network for supported devices
Manual connections
End users have option to manually add/delete devices
Automatically names devices
User can change the name
Communications
Types (Modbus)
TCP/IP
RS-485 Serial
Troubleshooting devices with communications errors marked/highlighted in red on the device list. Right click on device and restore communications.

8. Auto Discovery of networked devices

9. Data Logging Onboard Data Logging: PC-based Data Logging:
Power Meter 820/850 perform onboard data logging
PowerView Software automatically data retrieves onboard files every 4 hours from Power Meter 800s
The onboard data log interval is set in PMCU (setup utility)
PC-based Data Logging:
PC-based data logging is collected by PowerView for the high density meters and Series 700 Power Meters
Default logging interval is 15 minutes and can be changed by the end user
The measurements that are PC based data logged are a fixed set of parameters that cannot be changed
Quantities (measurements) Logged:
The measurements logged will be current, voltage, power, power factor, energy, demand power, demand current, and total harmonic distortion (THD).

10. Database Management Database Backups: Database Restores:
The option to backup the database will be available.
Database Restores:
The option to restore the database will be available.
Historical Database Management:
The Historical database will be maintained below 2GB in size. Data will be deleted from the Historical database as first in – first out (FIFO) to prevent growth over 2GB. Deleted Historical data is not retained.
An indication will be provided when the database goes into FIFO mode
Upgrade options
The PowerView Software databases will be compatible with SMSPE (requires SqD Engineering Services to migrate customer from PowerView to SMSPE)

11. Real Time Display – Summary View

12. Real Time Display – Device View

13. Report Builder Basic Queries: Pre-configured Queries: Reports Viewer:
Device(s) + Measurement(s)+ time range= Output (trends, charts, tables)
Both PC and Onboard (PM8’s) data available in database.
Pre-configured Queries:
Focused on providing end user with historical information on their Electrical Energy usage and power demand.
Energy usage for last day, week, month
Energy TOU (Time of Use) or Energy Bands outputs
Support for Time of Use Metering includes.
Defining up to 3 schedules
Each Schedule can contain
-> up to 10 periods (bands) for energy accumulation
-> Supports weekends, special days, holidays
Reports Viewer:
End user will be expected to have Microsoft Excel to view reports.
All costing and other calculations (eg. Terrifications, rates) can be done manually by the customer in Excel.

14. Report Builder

15. General Report Example

16. Export the Data

17. Time of Use Setup

18. Time of Use Setup

19. Time of Use Setup

20. Time of Use Setup

21. Time of Use Setup

22. Appendix A – Data Logging per Device

23. Appendix B – Comparison Chart PowerView vs. SMS 4.0

24. Appendix B – Comparison Chart PowerView vs. SMS 4.0
Part 1:
POWERVIEW

25. Appendix B – Comparison Chart PowerView vs. SMS 4.0
Part 2: X
(3) Database only , to SMSPE, by qualified personnel

26. Appendix B – Comparison Chart PowerView vs. SMS 4.0
Part 3:
(4) PV: Automated/ SMS v4: Automated/manual
(5) PV: 32 devices, support PM9, PM2, PM500, PM7, PM810, PM820, PM850, PM9, ION6200, Micrologic P & H, Toro MC. SMSv4: DL (32 devices), SE, PE (unlimited)