1. Earthquake Safety
By: Victor Abravanel

2. Approaches to Safety
Determining an earthquakes occurrence before it actually happens?!
Relief efforts in place before the actual event.
Being prepared for tsunami related events.
Rendering buildings less susceptible to earthquake related damages. *Focus of presentation*

3. Predicting Earthquakes
At this point there are no highly effective predictors other than seismograph readings a few seconds before a major event.
General earthquake averages can be predicted but this is not useful towards population evacuations.

4. Relief Efforts in Place
Have agencies in place ready to aid in the case of a major earthquake.
Can include multilateral aid.
Image on right of the US army providing water to Haiti.

5. Tsunami Preparations
Tsunamis can follow an earthquake and will result in massive damage.
Tips:
Prepare emergency kits in advance.
Stay away from the beach.
Head for high ground.
Do not fight the current. Grab onto something and go for a ride.

6. Earthquake Resistant designs
Site choice
Structural components
Ductility
Active mass damping
Seismic invisibility cloak

7. Site Choice
Bedrock is the ideal place to build structures because of its firmness.
Soft or filled-in soil can undergo liquefaction during an earthquake and behave like a liquid.

8. Site Choice

9. Structural components
Create a continuous load path so that forces can be transferred from the frame of the house to the foundation.
Insertion of shear panels can provide additional strength against lateral loads acting on structures.
Buildings can also be built with metal springs, ball bearings and rubber pads.
Symmetry to prevent torsional stress and equally distribute forces.

10. Ductility
Ductility refers to a materials ability to undergo plastic deformation.
Brick and concrete have low ductility and so are not ideal for earthquake safety.
Steel-reinforced concrete or structural steel are much more ductile. They can absorb more energy without breaking.

11. Active Mass Damping
One of the more technologically advanced methods for creating earthquake- resistant buildings.
On the right is the Taipei 101 building in Taiwan.

12. Active Mass Damping
Consists of including a heavy mass near the top of the building that is attached to viscous dampers that act as shock absorbers.
When the building begins to oscillate the mass will move in the opposite direction, reducing the amplitude of the mechanical vibration.

13. Seismic Invisibility Cloak
Concentric plastic rings are installed underground in the top three feet of soil.
Harder layers are further from the building. Each time the wave hits a softer layer it is deflected off its initial path.
Once past the building the waves can continue on their path.

14. Questions?

15. Sources
Retrieved March 24th, 2014 from resistant-buildings.htm
Retrieved March 24th, 2014 from skyscraper
Retrieved March 24th, 2014 from
Tsunami. (n.d.). In Wikipedia. Retrieved March 24th, 2014 from
Earthquake prediction. (n.d.). In Wikipedia. Retrieved March 24th, from