Presentation is loading. Please wait.

Presentation is loading. Please wait.

Steady State Heat Transfer in Clad Nuclear Fuel Rod in COMSOL Prepared By: Kayla Kruper MANE 4240 G11: Introduction to Finite Elements Monday, April 28,

Published byBaldwin West Modified over 9 years ago

Similar presentations

Presentation on theme: "Steady State Heat Transfer in Clad Nuclear Fuel Rod in COMSOL Prepared By: Kayla Kruper MANE 4240 G11: Introduction to Finite Elements Monday, April 28,"— Presentation transcript:

1 Steady State Heat Transfer in Clad Nuclear Fuel Rod in COMSOL Prepared By: Kayla Kruper MANE 4240 G11: Introduction to Finite Elements Monday, April 28, 2014

2 Formulation 4/28/2014Prepared By: Kayla Kruper2

3 Finite Element Modeling Geometry 2D Axisymmetric Added General Heat Source Added Inward Heat Flux 4/28/2014Prepared By: Kayla Kruper3

4 Analytical Solution 4/28/2014Prepared By: Kayla Kruper4

5 Results Verified 4/28/2014Prepared By: Kayla Kruper5

6 Results Examined for Short Fuel Rod 4/28/2014Prepared By: Kayla Kruper6

Download ppt "Steady State Heat Transfer in Clad Nuclear Fuel Rod in COMSOL Prepared By: Kayla Kruper MANE 4240 G11: Introduction to Finite Elements Monday, April 28,"

Similar presentations

FEA Course Lecture V – Outline

FEA Course Lecture V – Outline
Finite Element Radiative and Conductive Module for use with PHOENICS Department of Materials Engineering, University of Swansea, Swansea, SA2 8PP, UK DERA.

Finite Element Radiative and Conductive Module for use with PHOENICS Department of Materials Engineering, University of Swansea, Swansea, SA2 8PP, UK DERA.
Improvements on FRAPCON3 and FRAPTRAN Mechanical Modelling Arttu Knuutila, Seppo Kelppe SAFIR-PUOLIVÄLISEMINAARI 20.-21.1.2005.

Improvements on FRAPCON3 and FRAPTRAN Mechanical Modelling Arttu Knuutila, Seppo Kelppe SAFIR-PUOLIVÄLISEMINAARI
Scientific Computing Lab Introduction to COMSOL - Multiphysics Dheevatsa Mudigere Institut für Informatik Scientific Computing in Computer Science.

Scientific Computing Lab Introduction to COMSOL - Multiphysics Dheevatsa Mudigere Institut für Informatik Scientific Computing in Computer Science.
1 DLES, Ercoftac Workshop, Trieste, 8-10 September 2008 LES of turbulent flow through a heated rod bundle arranged in a triangular array. S. Rolfo, J C.

1 DLES, Ercoftac Workshop, Trieste, 8-10 September 2008 LES of turbulent flow through a heated rod bundle arranged in a triangular array. S. Rolfo, J C.
MECh300H Introduction to Finite Element Methods

MECh300H Introduction to Finite Element Methods
MANE 4240 & CIVL 4240 Introduction to Finite Elements Introduction to differential equations Prof. Suvranu De.

MANE 4240 & CIVL 4240 Introduction to Finite Elements Introduction to differential equations Prof. Suvranu De.
CHE/ME 109 Heat Transfer in Electronics LECTURE 12 – MULTI- DIMENSIONAL NUMERICAL MODELS.

CHE/ME 109 Heat Transfer in Electronics LECTURE 12 – MULTI- DIMENSIONAL NUMERICAL MODELS.
Lesson 3 Basic Concepts. Fundamentals Any continuous quantity (temperature, displacement, etc.) can be approximated by a discrete model composed of a.

Lesson 3 Basic Concepts. Fundamentals Any continuous quantity (temperature, displacement, etc.) can be approximated by a discrete model composed of a.
Discussion of Heat Transfer in Nuclear Reactors Spencer Hovey and Nathan Clark ME 340—Heat Transfer Dr. Vladimir Solovjov December 7 th, 2005.

Discussion of Heat Transfer in Nuclear Reactors Spencer Hovey and Nathan Clark ME 340—Heat Transfer Dr. Vladimir Solovjov December 7 th, 2005.
Fins Design Project. Problem Does adding fins to the heating coil of a conventional oven significantly reduce the time required to heat the oven? Objectives.

Fins Design Project. Problem Does adding fins to the heating coil of a conventional oven significantly reduce the time required to heat the oven? Objectives.
Friday Session 1 Planning a GIS Project The Project Process Diagram

Friday Session 1 Planning a GIS Project The Project Process Diagram
An Analysis of the Stress Relief Process of Drum Rotors John Moran Conduction Heat Transfer MEAE6630H01 April 13, 2000.

An Analysis of the Stress Relief Process of Drum Rotors John Moran Conduction Heat Transfer MEAE6630H01 April 13, 2000.
MECH300H Introduction to Finite Element Methods Lecture 9 Finite Element Analysis of 2-D Problems – Axi- symmetric Problems.

MECH300H Introduction to Finite Element Methods Lecture 9 Finite Element Analysis of 2-D Problems – Axi- symmetric Problems.
Finite Element Modeling with COMSOL Ernesto Gutierrez-Miravete Rensselaer at Hartford Presented at CINVESTAV-Queretaro December 2010.

Finite Element Modeling with COMSOL Ernesto Gutierrez-Miravete Rensselaer at Hartford Presented at CINVESTAV-Queretaro December 2010.
CONDUCTION HEAT TRANSFER IN A MASS SPECTROMETER FILAMENT Conduction Heat Transfer MEAE-6630 Angela Mangio.

CONDUCTION HEAT TRANSFER IN A MASS SPECTROMETER FILAMENT Conduction Heat Transfer MEAE-6630 Angela Mangio.
1 Numerical Study of the Vibration of a Periodically-supported Beam Final Presentation Dec 10, 2009 Brandon Rush.

1 Numerical Study of the Vibration of a Periodically-supported Beam Final Presentation Dec 10, 2009 Brandon Rush.
MECH593 Introduction to Finite Element Methods

MECH593 Introduction to Finite Element Methods
By Chris Klobedanz MANE-4240 Final Project. Purpose Evaluate the Natural Frequencies of a Steel Cantilever Beam System Compare the Results of Beams with.

By Chris Klobedanz MANE-4240 Final Project. Purpose Evaluate the Natural Frequencies of a Steel Cantilever Beam System Compare the Results of Beams with.
Feasibility Analysis h T1 T2 T3 T4 T5 One Dimensional Transient Analysis One Dimensional Finite Difference Steady State Analysis T1 and T5 will be known.

Feasibility Analysis h T1 T2 T3 T4 T5 One Dimensional Transient Analysis One Dimensional Finite Difference Steady State Analysis T1 and T5 will be known.

Similar presentations

Ads by Google