2. 1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks. 5.Practical exercises with the SmartTool. 6.DisplayIT software, showing off the results. 7.The Single-shot StoreIT menus. 8.The Multi-shot StoreIT menus. Training modules

3. 1 What’s new -- SensIT probe -- sealed and unopenable no plugs or cables

4. 1 What’s new -- StoreIT data pad -- sealed in an Aquapac, -- hung on a lanyard.

5. SensIT & StoreIT -- ten years power - built in, no batteries or chargers. no plugs or cables 1 What’s new --

6. SensIT, StoreIT & your PC -- transfer data by automatic fast radio link. 1 What’s new --

7. Quality assurance system -- warns of magnetism or movement 1 What’s new --

8. Shock resistant to 6000G 1 What’s new -- SensIT in its pressure barrel Watertight to 4000 metres Shockproof to 6000g

9. 2 What can SmartTool do for me? -- Four different tasks Single-shot survey ----- read data on StoreIT ----- combine data on PC to make … Multi-shot survey 3D hole path using magnetic azimuth measurement Orientated survey ----- less than 30m, close to vertical 3D hole path maintaining azimuth with orientation rods Tool or Core orientation, using Gravity roll angle ---- for inclined holes Magnetic toolface angle --- for vertical holes

10. Eight measurements at each DEPTH (shot) recorded by SensIT 1 Dip (Inclination) of hole 2 Direction (azimuth) of hole for Positional Survey 5 Magnetic field strength 6 Magnetic dip angle for Quality Assurance 3 Gravity Roll angle of SensIT 4 Toolface angle of SensIT for Orientation 7 Temperature of SensIT 8 Depth, time and date for the record 2 What can SmartTool do for me? --

11. Survey

12. 2 What can SmartTool do for me? -- Orientation Setting the zero Gravity Roll Angle

13. 2 What can SmartTool do for me? -- Orientation Setting the zero MagneticToolface Angle

14. The Earth’s Gravitational Field 2 What can SmartTool do for me? -- Quality assurance.

15. The Earth’s Gravitational Field If Grav. Field is not 1.00 G, then SensIT is moving; Dip and Azimuth may both be unreliable 2 What can SmartTool do for me? -- Quality assurance.

16. The Earth’s magnetic field Variation - angular difference between True North and Magnetic North Magnetic Field Strength - the force of the earth's magnetic field Magnetic Dip Angle - angle the field force lines make with the horizontal At each place on the earth's surface, these values are known. 2 What can SmartTool do for me? -- Quality assurance.

17. Set the threshold for the local magnetic environment 2 What can SmartTool do for me? -- Quality assurance.

18. Identify the unreliable azimuths 2 What can SmartTool do for me? -- Quality assurance.

19. 1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks. 5.Practical exercises with the SmartTool. 6.DisplayIT software, showing off the results. 7.The Single-shot StoreIT menus. 8.The Multi-shot StoreIT menus. Training modules

20. 1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks. 5.Practical exercises with the SmartTool. 6.DisplayIT software, showing off the results. 7.The Single-shot StoreIT menus. 8.The Multi-shot StoreIT menus. Training modules

21. DATA, Shows Survey SETTINGS #, Hole Ref. & Depth Timer } +/- Azimuth Depth }3 +/ Inclination Hole ref. } +/- OK Mag Field Enter Archive OK Mag Dip Set Mag Field/Dip OK G.R/angle Zero G.R/angle OK M.T/face Zero M.T/face OK Time Set time +/- OK Date Set date +/- OK Temperature Multi-shot mode? OK >>Press SETTINGS to exit >>Press NEW to start timer Here the DATA button displays each reading from a Single-shot survey. 7The StoreIT Single-shot menus

22. First survey press New Next Survey press New SETTINGS 1 Change SETTINGS 2Change SETTINGS 3 Hole ref. }Next DepthHole ref. Start depth }Depth intervalStart depth Depth interval } 5End surveyDepth interval Direction }>>Press DATADirection Time interval }to continue surveyEnd session -download Set time >>Press DATA Set datefor next survey Single-shot mode? >>Press DATA for first survey Here the DATA button is only a switch from the SETTINGS menus back to the survey operation.Then, to start a survey, press NEW 8The StoreIT Multi-shot menus